多目标多约束的集成电路统计优化策略

对于集成电路设计、生产过程中的多目标、多约束统计优化问题,本文提出了“合格率足够高”的优化宗旨,并从概率论的基本原理出发,结合集成电路的特点,导出了一种合格率的近似表述方法,提出的变权重Monte Carlo法编程简便,效率高。采用这些优化策略设计的集成电路合格率优化系统取得了比较好的结果。     

Diabetes during Pregnancy: A Maternal Disease Complicating the Course of Pregnancy with Long-Term Deleterious Effects on the Offspring. A Clinical Review

In spite of the huge progress in the treatment of diabetes mellitus, we are still in the situation that both pregestational (PGDM) and gestational diabetes (GDM) impose an additional risk to the embryo, fetus, and course of pregnancy. PGDM may increase the rate of congenital malformations, especially cardiac, nervous system, musculoskeletal system, and limbs. PGDM may interfere with fetal growth, often causing macrosomia, but in the presence of severe maternal complications, especially nephropathy, it may inhibit fetal growth. PGDM may also induce a variety of perinatal complications such as stillbirth and perinatal death, cardiomyopathy, respiratory morbidity, and perinatal asphyxia. GDM that generally develops in the second half of pregnancy induces similar but generally less severe complications. Their severity is higher with earlier onset of GDM and inversely correlated with the degree of glycemic control. Early initiation of GDM might even cause some increase in the rate of congenital malformations. Both PGDM and GDM may cause various motor and behavioral neurodevelopmental problems, including an increased incidence of attention deficit hyperactivity disorder (ADHD) and autism spectrum disorder (ASD). Most complications are reduced in incidence and severity with the improvement in diabetic control. Mechanisms of diabetic-induced damage in pregnancy are related to maternal and fetal hyperglycemia, enhanced oxidative stress, epigenetic changes, and other, less defined, pathogenic mechanisms.     

30%苄氨基嘌呤悬浮剂对芹菜生长和品质的影响

田间条件下研究了不同浓度苄氨基嘌呤悬浮剂对芹菜生长和品质的影响。结果表明,剂量浓度在60~120 mg/kg范围内均可提高芹菜的株高和产量,120 mg/kg剂量浓度处理对亩产量和株高的提高幅度达到了显著水平(P<0.05);药剂对芹菜安全性和品质分析结果表明,试验药剂30%苄氨基嘌呤悬浮剂各剂量浓度对芹菜均没有明显药害,对芹菜的干物质重量、维生素(Vc)和可溶性固形物含量均无显著影响。     

Long-lasting photoluminescence quantum yield of cesium lead halide perovskite-type quantum dots

Cesium lead halide perovskite(CsPbX₃,X=Cl,Br,I)quantum dots(QDs)and their partly Mn²⁺-substituted QDs(CsPb1–xMnxX3)attract considerable attention owing to their unique photoluminescence(PL)efficiencies.The two types of QDs,having different PL decay dynamics,needed to be further investigated in a form of aggregates to understand their solid-state-induced exciton dynamics in conjunction with their behaviors upon degradation to achieve practical applications of those promising QDs.However,thus far,these QDs have not been sufficiently investigated to obtain deep insights related to the long-term stability of their PL properties as aggregated solid-states.Therefore,in this study,we comparatively examined CsPbX₃-and CsPb1–xMnxX₃-type QDs stocked for>50 d under dark ambient conditions by using excitation wavelength-dependent PL quantum yield and time-resolved PL spectroscopy.These investigations were performed with powder samples in addition to solutions to determine the influence of the inter-QD interaction of the aged QD aggregates on their radiative decays.It turns out that the Mn²⁺-substituted QDs exhibited long-lasting PL quantum efficiencies,while the unsubstituted CsPbX₃-type QDs exhibited a drastic reduction of their PL efficiencies.And the obtained PL traces were clearly sensitive to the sample status.This is discussed with the possible interaction depending on the size and distance of the QD aggregates.     

玲珑金矿田含矿断裂的基岩地球化学特征及找矿潜力评价

基岩地球化学方法广泛应用于地质找矿与生产实践,是开展深部找矿预测最直接的方法和手段。通过对玲珑金矿田井下含矿断裂和招平断裂的基岩剖面地球化学特征进行系统研究,得出以下认识：玲珑金矿田原生晕最佳指示元素组合为Au、Ag、Bi、As和Co,且Au-Ag、Au-Bi、Au-As及Au-Co元素之间呈较好的幂指数正相关。根据玲珑金矿田已探明矿脉最佳指示元素组合的统计结果,结合招平断裂基岩剖面地球化学测量结果,发现招平断裂在地表有2处金矿化异常,推测其为矿致异常,反映出该地段具有较好的找矿潜力,特别是前花园村东1021剖面中异常找矿潜力更大。     

Ce对440C不锈轴承钢夹杂物演变的影响

为探究稀土Ce对440C不锈轴承钢中夹杂物的改性作用,利用实验室MoSi₂电阻炉对440C不锈轴承钢进行稀土Ce处理,采用OM、SEM等系统分析了Ce的添加对440C不锈轴承钢脱氧及夹杂物演变的影响。结果表明,随着Ce加入量的增加,其收得率逐渐升高。Ce的加入使钢中TO质量分数由0.002 5%降低至0.001 2%。未加入Ce的钢中夹杂物主要为Al₂O₃、MnS以及镁铝尖晶石;加入质量分数为0.011 5%的Ce后,夹杂物被改性为以Ce-Al-O为主的夹杂物;当Ce的添加量达到0.036 4%时,夹杂物被完全改性为Ce-O-S夹杂物。适量的Ce可以降低夹杂物尺寸及面积比例,但过量加入会使夹杂物尺寸变大。在本试验条件下,当Ce质量分数为0.011 5%时,钢中夹杂物细小弥散效果最明显。以上结论可为Ce在高碳铬不锈轴承钢中的应用提供参考。     

Zr,Cr和B对Ni3Al合金组织和力学性能的影响

本文研究了含Zr(0—0.6at.-％),Cr(0—7.7at.-％)和B(0—2.22at.-％)的Ni_3Al合金的组织和室温至1050℃拉伸性能。结果表明,Ni_3Al合金的屈服强度随温度升高而增加,表现出反常的温度关系。到达峰值后,随温度升高,屈服强度降低。Zr和Zr+Cr在整个试验温度范围都增加Ni_3Al合金的屈服强度,并改善高温抗张强度和塑性。硼增加Ni_3Al合金的抗张强度和屈服强度,同时改善塑性。但当硼含量超过1.37at.-％时,则降低强度和塑性。当硼含量超过溶解度极限时,Ni_3Al合金中形成岛状和球状的Ni_(20)Al_3B_6和Ni_3Al的共晶组织,对强度和塑性都是有害的。     

表面微观屈服强度与疲劳极限的关系SCIEI

本文利用X射线对不同碳含量钢的表面微观屈服强度进行了研究。试验结果表明,表面微观屈服强度σ_(ms)远低于整体材料的屈服限,是一个反映表面抵抗塑性变形能力大小的参量。材料光滑疲劳极限往往是由裂纹荫生所控制的,与表面抵抗塑性变形的能力有关。本试验表明不同材料的σ_(ms)与存活率为50％疲劳极限的关系为:σ_(ms)=(0.81—1.02)σ_(-1);40Cr不同热处理状态的σ_(ms)与存活率为99.9％疲劳极限的关系为:σ_(ms)=(0.98—1.10)σ_(-1)。σ_(ms)的测定要比疲劳极限σ_(-1)的测定省时得多,有可能在工程上获得应用。     

铝合金时效-屈服强度的实验与模型化研究

以析出热力学、长大动力学及位错理论为基础，研究了铝合金在时效过程中盘／片状、棒／针状析出相尺寸、体积分数对时效合金强化效果的影响，从微观-宏观相结合的角度建立了具有盘／片状、棒／针状细小时效强化相铝合金的时效工艺-屈服强度量化模型，并通过513K温度下时效Al-Cu-Mg合金和463K温度下时效Al-Mg-Si合金的实验结果对模型进行了验证，取得了较满意的吻合结果，并对本模型的模拟精度与时效析出相参数之间的关系进行了讨论。     

A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.