基于MATLAB的远程电机调速系统设计

详细介绍了利用MATLAB语言实现串行通信的原理和步骤,并给出了在MATLAB环境下实现远程电机调速的具体应用,实验结果表明该方案具有简单、实用、实时性能好,控制精度高等特点.     

Plasma Discharge Initiation of Explosives in Rock Blasting Application： A Case Study

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.     

煤燃烧系统中碳黑的研究进展

碳黑对人类健康和环境辐射平衡有重要的影响.火焰中的碳黑,可以增强辐射换热效果,碳黑也影响氮氧化物的生成和排放.当煤不完全燃烧时,煤的挥发分在高温时发生二级反应,形成碳黑.介绍了研究碳黑的3种模型和3种实验方法.     

虚拟专用网的体系结构及实现

提出VPN接入设备的体系结构 ,包括系统的应用模型、层次划分和内部详细结构 ,阐述实现VPN的关键技术。     

A Cold Model Aerodynamical Test of Air-Staged Combustion in a Tangential Firing Utility Boiler

The purpose of this paper is to present the flow field in the 300MW tangential firing utility boiler that used the Low NOx Concentric Firing System （LNCFS）. Using the method of cold isothermal simulation ensures the geometric and boundary condition similarity. At the same time the condition of self-modeling is met. The experimental results show that the mixture of primary air and secondary air becomes slower, the average turbulence magnitude the relative diameter of the tangential firing enlarges of the main combustion zone becomes less and when the secondary air deflection angle increases When the velocity pressure ratio of the secondary air to the primary air （p2/p1） enlarges, the mixture of the secondary air and the primary air becomes stronger, the average turbulence magnitude of the main combustion zone increases, and the relative diameter of the tangential firing becomes larger. Because the over fire air （OFA） laid out near the wall has a powerful penetration, the relative diameter of the tangential firing on the section of the OFA is very little, but the average turbulence magnitude is great. When the velocity pressure ratio of the OFA to the primary air POFA/p1 increases, the relative diameter of the tangential firing on the section of the OFA grows little, the average turbulence magnitude becomes larger and the penetration of the OFA becomes more powerful.     

Heat transfer of a row of three butane/air flame jets impinging on a flat plate

Experiments were performed to investigate the heat transfer characteristics of a row of three premixed, laminar, butane/air flame jets impinging on a water-cooled flat plate. The between-jet interference was found to reduce the heat transfer rate in the jet-to-jet interacting zone due to the depressed combustion. The interference became stronger when the jet-to-jet spacing and/or the nozzle-to-plate distance were/was small. The positive pressure existed in the between-jet interacting zone caused the asymmetric flame and heat transfer distribution of the side jet. The meeting point of the spreading wall jets of the central and the side jets did not occur at the midpoint of the neighboring jets, but at a location shifted slightly outwards. The maximum local heat flux and the maximum area-averaged heat flux occurred at a moderate nozzle-to-plate distance of 5d with a moderate jet-to-jet spacing of 5d. The lowest area-averaged heat flux was produced when both the jet-to-jet spacing and the nozzle-to-plate distance were small. Comparing with a single jet under the same experimental conditions, the heat transfer rates in both the stagnation point and the maximum heat transfer point were shown to be enhanced in a row of three-jet-impingement system. The present study provided detailed information on the heat transfer characteristics of a row of three in-line impinging flame jets, which had rarely been reported in previous study.     

硫化矿石氧化性的实验室综合评判

探讨了一种硫化矿石氧化性综合评判的新方法 ,并将该方法应用于矿山实际 ,得到了准确的评判结果。该项成果对于硫化矿石自燃防治理论与技术的研究具有很高的参考价值。     

Relationships between multiaxial stress states and internal fracture patterns in sphere-impacted silicon carbide

Internal fracture patterns developed in silicon carbide cylindrical targets as a result of dynamic indentation (63–500 m/s) by tungsten carbide spheres are defined. Microscopy of recovered and sectioned targets delineate into three regions, each associated with distinct cracking modes, i.e., shallow cone macrocracking at and near the impact surface, steep interior cone macrocracks that radiate into the target from the impact region and local grain-scale microcracking directly underneath the impact region. The observed fracture patterns are found to maintain a noticeable degree of self-similarity upto the impact velocity of 500 m/s. Linear elastic analysis of the full (surface and interior) stress field developed under static (Hertz) contact loading delineate the target into four regions, based on the number of principal stresses that are tensile (none, 1, 2 or all 3). A strong correlation is found between the principal stress conditions within each region and the forms of cracking, their locations and orientations present therein. This correlation has a number of implications, including non-interaction of crack systems, which are discussed. Illustrative linear elastic fracture mechanics analyses are performed for three regions, and calculated and observed macrocrack lengths are found to be in reasonable agreement.     

Facile synthesis of nanocrystalline zinc ferrite via a self-propagating combustion method

Macroporous nanocrystalline zinc ferrite with single spinel-phase was prepared by a facile self-propagating combustion method using zinc nitrate, iron nitrate and glycine. The as-prepared ZnFe₂O₄ were characterized by X-ray diffraction (XRD) analysis, N₂ adsorption, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and energy dispersive X-ray spectrum (EDS). The magnetic properties of the prepared ZnFe₂O₄ were also studied.     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。