含Ti微合金钢动态再结晶行为及模型研究

采用Gleeble 3800热力模拟实验机,研究了一种Ti微合金钢在850～1 150℃、0.1和1.0 s-1条件下的变形奥氏体的动态再结晶行为及再结晶后奥氏体晶粒尺寸的演化规律。结果表明:形变激活能与变形条件相关,随着应变速率的增加而增加;Avrami指数m同样与变形条件有关;对实验数据进行回归分析后建立的Ti微合金钢动态再结晶的特征应变、特征应力、动力学以及稳定状态晶粒尺寸的数学模型精度较高。     

一水硬铝石的热分解反应动力学

根据一水硬铝石(α-AlOOH)分解前后的X射线衍射(XRD)谱, 判断其热分解后主要生成α-Al2O3. 分别用Coats-Redfern积分法和Kissinger方法处理了不同升温速率下一水硬铝石的差热曲线, 两种方法得到的热分解反应动力学参数非常接近, 计算所得的活化能分别为254.54 kJ/mol和244.08 kJ/mol, 并推断了反应的动力学模型和反应机理. 研究表明一水硬铝石的热分解符合Mample单行法则, 相对应的机理为随机成核和随后增长.     

What do we mean by “catalytic activity”?

The relative reactivities of the lower alkanes in hydrogenolysis on a Pt/Al₂O₃ catalyst depend on the H₂ pressure used, as do those of a Ru/Al₂O₃ catalyst, pretreated in various ways, for propane hydrogenolysis. Apparent activation energies also vary with H₂ pressure. No single rate measurement adequately represents catalytic activity, which is properly defined as the rateconstant for the slow step.     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

碳纳米管及C60和石墨氧化动力学机理函数的分析

The oxidation of carbon nanotubes, C60 and graphite was studied by thermogravimetric (TG) analysis and differential thermal analysis (DTA) technique, and the oxidation kinetic models of three carbon materials studied were analyzed by mechanism-function method. The results indicate that three carbon species adopt different oxidation mechanisms due to their different structures. The oxidation of carbon nanotubes with cylindrical structure follows contracting volume reaction mechanism [R3 mechanism, 1-(1-α)1/3 = kt], indicating that the oxidation of carbon nanotubes takes place from the ends to the center. For graphite with planar sandwich structure, the oxidation starts at the edges initially and gradually moves toward the center, which corresponds to contracting area phase boundary reaction mechanism [R2 mechanism, 1-(1-α)1/2 = kt]. The oxidation of C60 with spherical structure, however, is complex and apparently cannot be illustrated with a single kinetic model. The values of apparent activation energy     

The dynamic adsorption of benzene vapor on the ACF activated by phosphoric acid

The dynamic adsorption behaviors of benzene vapor on phosphoric acid‐activated carbon fiber (ACF‐P) were investigated by gas chromatography. The experimental results showed that ACF‐P that was activated at >350^°C, like steam‐activated carbon fiber (ACF‐W), has good dynamic adsorption properties for benzene vapor. However, the saturation adsorption capacities of ACF‐P and ACF‐W are different. The dynamic adsorption conditions apparently do not affect the effluent concentration before the breakthrough point, but do change the operation loading and usage efficiency. The adsorbed ACF‐P can be regenerated, and good dynamic adsorbability can be recovered by heating treatment. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1841–1847, 2002     

光催化剂SrTiO3的制备及其性能的研究

论述用化学液相共沉淀法制备SrTiO_3的最佳条件,及在不同的活化条件下对SrTiO_3光催化性能的影响。此外还研究了掺入过渡金属氧化物对SrTiO_3催化性能的改善。     

端氨基树枝状大分子/环氧树脂体系固化动力学的FTIR研究

用傅立叶变换红外光谱(FTIR)法研究了双酚A二缩水甘油醚环氧树脂(GEBA)用低代端氨基聚(酯-胺)树枝状大分子G1.0(NH2)3、G1.5(NH2)8和聚(胺-酰胺)树枝状大分子PAMAM1.0(NH2)4作为固化剂的等温固化动力学,得到了不同温度下转化率与固化时间及反应速率与固化时间的关系.与小分子固化剂相比,端氨基树枝状大分子作固化剂时环氧基转化率在反应开始时增长得更快,较高代树枝状大分子在高温下固化环氧树脂时尤其如此.在相同温度和时间下,PAMAM1.0(NH2)4/DGEBA、G1.0(NH2)3/DGEBA、G1.5(NH2)8/DGEBA体系的转化率依次增大.进一步估算了3个体系在一定转化率下的固化反应表观活化能.在相同转化率时,用G1.5(NH2)8、PAMAM1.0(NH2)4、G1.0(NH2)3作固化剂的体系表观活化能依次减小.     

中药降香对酪氨酸酶激活作用的动力学研究

酪氨酸酶是生物合成黑素的主要酶。降香有促进酪氨酸酶活性的作用。通过对中药降香的水提取液和乙醇提取液促进酪氨酸酶活性作用的观察研究及降香提高酪氨酸酶活性的动力学观察研究，得到Lineweaver-Burk曲线、动力学回归方程及米氏常数Km值。为研究中药有效成分激活黑素细胞的机理奠定了基础。