超分子作用阻尼材料的动态力学模型修正

为提高飞机起落架载荷实测精度，以支柱式起落架结构为研究对象，探讨处理其载荷标定数据的工程方法。首先，对实际受载情况和单向加载工况标定数据的分析，挖掘出三向载荷、缓冲支柱压缩行程与应变码值间的数学关系，将预测的数学关系代入到多向工况的标定数据中，验证了它们的准确性;其次，根据两种标定数据回归方法，提出了对应使用的支柱式起落架载荷-应变标定方程的数学模型;最后，将两种标定方程代回到标定数据中，计算起落架三向载荷，所有反算载荷的误差均在可控范围内，表明标定方程满足精度要求。将标定方程代入实测数据中，实测曲线符合变化规律。该处理方法的应用能有力提高支柱式起落架的起飞-着陆载荷实测和载荷谱编制的准确度。     

多分量数据全波形反演在气藏检测中的关键问题——以苏里格气田为例

苏里格气田是中国典型的致密砂岩气藏，构造简单、平缓，横向非均质性强，有效储层与围岩声学特征差别小，地震响应不明显，常规地震监测方法预测难度大，但气田含气砂岩泊松比低，是地震气藏检测的有效参数。利用弹性全波形反演精度高和能处理复杂非均质介质的优势，反演地层拉梅常数、剪切模量和密度，并计算泊松比，从而进行气藏预测。重点阐述了苏里格气田多分量数据全波形反演初始模型建模、先验模型建模和地震数据预处理3个关键问题的处理方法。二维三分量数据反演和"甜点"预测结果表明：①对于具有强非均质性的苏里格气田，利用全波形反演获得精度较高的地层弹性参数能显著提高气藏预测的准确度；②苏里格地区构造简单、平缓，利用常规叠加速度并结合构造解释可以建立比较好的初始模型，从而有效地解决了周波跳跃和局部极小的难题；③先验知识的约束和地震数据的预处理是全波形反演成功应用于苏里格气田气藏检测的关键。     

Research on the identification performance of UHF RFID system considering the correlation of cascaded channel

The identification rate of UHF RFID system was restricted by multipath propagation effects.The system identification performance was studied considering the correlation coefficient between forward and reverse channels.Based on the generalized Rician fading channel model,the analytical expression of identification rate was derived under independent,full correlation and correlation cases.Compared with the existing analysis,the proposed uniform calculation formula of identification rate was for any correlation coefficient and kinds of channel conditions.The numerical computation and Monte-carlo simulations show that the influences of different correlation coefficients,channel conditions,sensitivity and distance on the identification rate.     

Three‐dimensional color prediction modeling of single‐ and double‐layered woven fabrics

In this research, the three‐dimensional structural and colorimetric modeling of three‐dimensional woven fabrics was conducted for accurate color predictions. One‐hundred forty single‐ and double‐layered woven samples in a wide range of colors were produced. With the consideration of their three‐dimensional structural parameters, three‐dimensional color prediction models, K/S‐, R‐, and L*a*b*‐based models, were developed through the optimization of previous two‐dimensional models which have been reported to be the three most accurate models for single‐layered woven structures. The accuracy of the new three‐dimensional models was evaluated by calculating the color differences ΔL*, ΔC*, Δh°, and ΔE_CMC(2:1) between the measured and the predicted colors of the samples, and then the error values were compared to those of the two‐dimensional models. As a result, there has been an overall improvement in color predictions of all models with a decrease in ΔE_CMC(2:1) from 10.30 to 5.25 units on average after the three‐dimensional modeling.     

Using electroencephalogram to continuously discriminate feelings of personal thermal comfort between uncomfortably hot and comfortable environments

Thermal comfort is an important factor for the design of buildings. Although it has been well recognized that many physiological parameters are linked to the state of thermal comfort or discomfort of humans, how to use physiological signal to judge the state of thermal comfort has not been well studied. In this paper, the feasibility of continuously determining feelings of personal thermal comfort was discussed by using electroencephalogram (EEG) signals in private space. In the study, 22 subjects were exposed to thermally comfortable and uncomfortably hot environments, and their EEG signals were recorded. Spectral power features of the EEG signals were extracted, and an ensemble learning method using linear discriminant analysis or support vector machine as a sub-classifier was used to build the discriminant model. The results show that an average discriminate accuracy of 87.9% can be obtained within a detection window of 60 seconds. This study indicates that it is feasible to distinguish whether a person feels comfortable or too hot in their private space by multi-channel EEG signals without interruption and suggests possibility for further applications in neuroergonomics.     

ECISER: Efficient Clip-art Image SEgmentation by Re-rasterization

Clip-art image segmentation is widely used as an essential step to solve many vision problems such as colorization and vectorization. Many of these applications not only demand accurate segmentation results, but also have little tolerance for time cost, which leads to the main challenge of this kind of segmentation. However, most existing segmentation techniques are found not sufficient for this purpose due to either their high computation cost or low accuracy. To address such issues, we propose a novel segmentation approach, ECISER, which is well-suited in this context. The basic idea of ECISER is to take advantage of the particular nature of cartoon images and connect image segmentation with aliased rasterization. Based on such relationship, a clip-art image can be quickly segmented into regions by re-rasterization of the original image and several other computationally efficient techniques developed in this paper. Experimental results show that our method achieves dramatic computational speedups over the current state-of-the-art approaches, while preserving almost the same quality of results.     

Synthesis and characterization of a novel Ca-alginate-biochar composite as efficient zinc (Zn2+) adsorbent: Thermodynamics,process design,mass transfer and isotherm modeling

In this present work, Ca-alginate-biochar adsorbent has been synthesized, characterized and tested its effectiveness in the removal of aqueous phase Zn²⁺ metal. The removal efficiency was studied under various physicochemical process parameters. External mass transfer model, intraparticle diffusion model and pseudo-first-order and pseudo-second-order models were used to fit the experimental Zn²⁺ adoption kinetic results and to identify the mechanism of adsorption. The desorption studies indicate the possibilities of ion-exchange and physical–chemical adsorption of Zn^2+. The adsorption was best described by Langmuir isotherm model. Thermodynamic parameters suggested that the adsorption process becomes spontaneous, endothermic and irreversible in nature.     

Determining the factors influencing students’ intention to use m-learning in Jordan higher education

M-learning is characterized as a powerful element of learning and education for facilitating the learning experiences. With enhanced and rapid advancements in technologies of ICTs (Information and Communication Technologies) and mobile, numerous innovative services and applications are being developed. Therefore, it becomes significant to investigate the factors influencing the intentions of m-learning to be used among the students of higher education institution. This study examines the “Technology Acceptance Model” (TAM), “Theory of Reasoned Action” (TRA) and “Unified Theory of Acceptance and Use of Technology” (UTAUT). The study is based on a survey being conducted across diverse groups of students, belonging to different communities and universities. The survey questionnaire was utilized for collecting the relevant data from 250 respondents. The results analyzed yields the impact that the proposed model of m-learning is comprehensive to study in the institutions of higher education.     

注采比对“二三结合”开发模式渗流特征的影响

大庆油田的开发逐渐进入高含水阶段,厚油层动用程度低,"二三结合"开发模式是有效的提高厚油层动用程度,改善水驱开发效果,提高油田采收率的有效手段。在"二三结合"开发模式注聚阶段中注采比对井间压力、含水饱和度等变化有重要影响。为了探究注采比对开发层位的井间压力及饱和度的影响,利用油藏数值模拟方法,模拟了相同的开发模式不同注采比的生产情况,绘制了不同注采比情况下,不同层位的井间压力及含水饱和度变化情况,为维持地层压力平衡,保持油田稳定生产提供有力的依据。     

Development and monitoring of an integrated bioprocess for production of a potential malaria vaccine with Pichia pastoris

An engineered variant of the yeast Pichia pastoris was used to produce the potential malaria vaccine D1M1. This paper describes the implementation of an expanded bed adsorption chromatography step into a sequential cultivation process of the yeast in order to link protein expression, cell release, and product capture of the secreted protein in a fully automated plant. The process is operated with a semi-continuous strategy for an integrated production. Process improvements have been achieved using design of experiments. Resulting purities of product achieved up to 87% with recoveries of 51% in a single downstream operation. Furthermore, a multivariate analysis of historical batch data was used to develop a golden batch model for process monitoring.