Modeling Condensation and Evaporation on Fruit Surface

Rewarming of fruits and vegetables after cooling is characterized by heat and mass transfer processes, which leads commonly to condensation of water on the produce surface at temperatures below the dew point. This effect may affect the produce quality due to microbial growth at unfavorable environmental conditions. The amount of condensed water is a function of the produce surface temperature and of the surrounding conditions as air temperature, air humidity, and air flow. Under practical conditions, both the warming and the condensation are strongly affected by the packaging system used. Depending on the flow conditions close to the produce surface, parameters of heat and mass transfer under laboratory conditions were measured. A mathematical model was developed for the determination of the amount of condensed water on fruit surfaces, its reevaporation, and its total dwell time dependent on the environment air conditions. The model describes the heat and mass transfer processes on single fruits. The process of diffusion of humidity in air and proceed of surface temperature is the basis for the model.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

离子束增强沉积薄膜合成及其在材料表面优化中的应用

作者在多年实验工作的基础上，论述了离子束增强沉积薄膜合成及其在材料表面优化中的应用、所用设备、膜的合成、表面优化技术与机理，并展望了前景。     

自蔓延高温合成表面涂层技术进展

介绍了自蔓延高温合成技术用于表面涂层的SHS熔铸涂层、SHS气相传输涂层、SHS铸渗涂层、SHS烧结涂层、SHS喷射沉积涂层和自反应涂层技术的原理、应用和发展 ,并指出了存在的问题     

强耦合表面磁极化子的基态能量和有效质量

采用Landau-Pekar变分理论研究强耦合表面磁极化子的性质。分别计算了强耦合表面磁极化子的基态能量和有效质量，并讨化了表面磁极化子的基态能量，振动频率和有效质量随磁场的变化关系。对KCL晶体进行了数值计算，结果表明，强耦合表面磁极化子的振动频率和有效质量随磁场的增加而增加，基态能量随磁场的增加而减少。     

Mask‐free Localized Grafting of Organic Polymers at the Micrometer or Submicrometer Scale on Composite Conductors or Semiconductor Substrates

This work presents a new one‐step process enabling the mask‐free localized functionalization by organic polymers of the conducting or semiconducting parts of composite surfaces at the micrometer and submicrometer scale. The functionalization is carried out via cathodic electrografting of suitable precursors of composite cathodes, which gives an insulating polymer film strongly grafted to selected parts of the composite electrodes and guarantees that the resolution is that of the pre‐existing pattern, even when the whole surface is dipped into the reaction medium. The presumed mechanism is based on a regioselective extraction of electrons from the composite surface according to its apparent local work function in solution.     

Elastic T-stress solutions for semi-elliptical surface cracks in finite thickness plates

Three-dimensional finite element analyses have been conducted to calculate the elastic T-stress for semi-elliptical surface cracks in finite thickness plates. Far-field tension and bending loads were considered. The analysis procedures and results were verified using both exact solutions and approximate solutions. The T-stress solutions are presented along the crack front for cracks with a/t values of 0.2, 0.4, 0.6 or 0.8 and a/c values of 0.2, 0.4, 0.6 or 1.0. Based on the present finite element calculations for T-stress, empirical equations for the T-stress at three locations: the deepest, the surface and the middle points of the crack front under tension or bending are presented. The numerical results are approximated by empirical formulae fitted with an accuracy of 1% or better. They are valid for 0.2?a/c?1 and 0?a/t?0.8. These T-stress results together with the corresponding K or J values for surface cracks are suitable for the analysis of constraint effects for surface cracked components.     

Low surface energy films based on partially fluorinated isocyanates: the effects of curing temperature

Self-stratification strategy can be used to prepare films in which both bulk and surface properties can be optimized. By using this approach, only a very small quantity of fluorinated species is needed to generate a surface with low surface energy. When cross-linking is involved during film formation, we are dealing with a competition behavior between the diffusion of fluorinated species and the formation of cross-linked network. In this study low surface energy polymeric films were prepared on the basis of partially fluorinated polyisocyanates, in combination with hydroxyl-end-capped three-armed solventless liquid oligoesters and modified hyperbranched polyesters. At a fluorine concentration of only 0.5 wt.%, contact angles of water and hexadecane can reach 120° and 80°, respectively. A surface energy as low as 10–15 mN/m can be obtained upon the addition of less than 1 wt.% of fluorine in the films. It was shown, from real time ATR-FTIR and contact angle measurements, that the curing temperatures demonstrated significant effects on the cross-linking rate as well as on the wettability of the films.