自动实时X射线检测技术在半导体制程控制中的应用

对X光检测的不同技术在半导体制程上的应用作了详细的介绍;着重讨论了全旋倾斜(off-axis)X射线技术的特点和优势。     

Study on the Intelligent System of Gear Pitch Deviation Measurement and Analysis

The intelligent controlling and data process of pitch error measurement is proposed. The whole system takes C++ as the development tool and takes advantages of object-oriented and visualization, having the advantages of easy operation and humanistic interface. In the meanwhile, the system can be complemented and improved according to the demand of user, having certain independence. The research of the system provides an efficient and reliable way to measure and analyze the gear pitch, which can be referenced in the future research.     

CMTS＋CM技术实现有线电视网络双向传输原理

用CMTS＋CM技术实现宽带接入是有线电视的主流方向。本文对其传输的原理、技术指标、改造注意事项及综合性能进行了分析。     

��������ܵ����������Ԥ��

通过对西气东输管道设计输量的研究 ,文章阐述了天然气管道输送量的选择与天然气市场需求预测、资源储备、气田开发方案之间的关系。从我国燃气需求增长曲线和国民经济总产值增长曲线的分析对比中 ,得出燃气增长规律与国民经济总产值增长规律相似的结论 ,并以此为依据 ,对西气东输管道天然气市场需求趋势进行了预测 ,提出了西气东输市场重点开发地区是上海、浙江、江苏等地区 ,用户消费结构重点放在城市燃气和发电等方面的观点。文章在天然气用户甄别方法中提出了用户项目成功率的概念 ,为进一步开展市场量化预测、理性选择天然气管道输量研究奠定了基础。根据对市场需求与气源供应之间的供需平衡分析 ,西气东输管道输量确定为 12 0× 10 8m3 /a较为合理。     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

连续箱梁桥中跨合龙段劲性骨架优化设计

结合某连续箱梁桥悬臂施工实践,对中跨合龙段劲性骨架设置和受力进行了分析,推导了劲性骨架设计的理论计算公式,并分析了劲性骨架刚度大小对桥梁整体结构的影响。     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

测尘仪原理与应用

本文介绍了测尘仪器的基本原理,着重阐述了透射法和散射法的基本原理和实际应用.     

SPC在变速器制造中的应用

这里首先建立了SPC系统的数学模型及数据处理模型，在此基础上完成了系统的功能结构设计以及事务处理过程设计，建立了关键工序与质量特性值的选取准则，继而完成了代码设计、数据库设计和故障诊断专家系统的设计：所形成的SPC软件系统达到了原设计指标要求。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。