An experimental and numerical study of hunting in thermostatic-expansion-valve-controlled evaporators

The dynamic behaviour of a thermostatic-expansion–valve (TEV)-controlled dry-evaporator is studied experimentally and numerically. Although the linear model of the TEV together with the distributed model of the evaporator is able to predict the stable dynamic response of the system adequately, it fails to reproduce the hunting behaviour that is observed under certain operating conditions. A scrutiny of the experimental data reveals the possible existence of hysteresis in the system. The distributed model including the experimentally determined input-output characteristics of the TEV is able to reproduce the main features of the hunting oscillations well. The amplitude and frequency of these oscillations depend on the static superheat setting, the heat load of the evaporator and the time constant of the TEV bulb.     

罗茨真空泵的溢流阀与旁通阀的组合

在简要地介绍了罗茨泵功能的基础上，通过溢流阀的改进设计，使溢流阀成为既能旁通又能溢流的组合阀，罗茨泵的功能将更加完备。     

二级采油技术在文南油田的应用

为解决文南油田高油气比井泵效低的问题，引进了二级采油技术。该技术采用特殊的二级采油工具，充分利用油井高油气比的特点，从而达到提高泵效的目的。文南油田30口井的现场试验表明，该技术应用后，平均单井泵效提高6%以上，平均单井视动液面下降739m，累积增油7560t。     

装载机多路阀操纵系统改进设计

论述了装载机现行的操纵机构,分析了液压先导操纵阀的应用局限性。介绍了气动助力器的工作原理,通过对操纵杆上的期望力分析计算获得满足性能要求的操纵力。装载机操纵机构借助助力器的助力作用,可以用较小的操纵力对装载机进行轻松操纵,从而使操作轻便灵活。     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

攀钢“501”滑动水口液压驱动系统的研制

介绍了为攀钢“５０１”滑动水口研制的专用液压驱动系统，对该系统的工作原理，性能特点，主要元件（设备）的选择原则等作了较为详细的说明介绍。     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

秦山核电厂蒸汽发生器水位控制试验

简要介绍了蒸汽发生器水位控制系统的运行方式和试验方法。试验项目包括旁通阀控制试验、主给水阀控制试验和旁通阀与主给水阀的切换试验。文中给出了试验结果,即在液位扰动和核动率扰动时,蒸汽发生器液位的变化过程。经过两个月的运行和瞬态试验,证明蒸汽发生器水位控制系统满足设计要求。     

Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.     

VGCR211型调速器在小浪底水电厂的应用

VGCR211型调速器的可编程控制器采用数字化双套冗余配置方式；应用程序由RS232串口写入用户存储器，确保电源消失后程序不会造成任何丢失；输出放大VCAl卡可独立实现对调速器的开度控制功能；转速检测单元采用齿盘测速方式，网频测量取自机端PT；导叶反馈采用角度传感器电气反馈方式。调速器的转速、开度和负荷三种控制模式可任意无扰动切换。在功能实现上，导叶采用关断阀，该阀集开停机阀和紧急停机阀功能于一体，不装事故配压阀。该调速器在小浪底水电厂投运以来其调节性能、可靠性基本达到设计要求，维护工作量较以往传统产品大大减少。