OCI9数据库访问接口的改进

大型空中交通管制系统中会因频繁连接数据库而导致系统性能下降。为解决上述问题,利用连接池技术对OCI9数据库访问接口进行改进,减小数据库连接对象频繁的创建和销毁带来的系统开销,提高系统性能。通过实验证明了该方法的有效性,并成功发现Oracle InstantClient Version 10.2.0.5的一个堆栈溢出错误。     

基于检测代理的应用级双机管理系统

分析现有空管系统中主从双机管理子系统的特点及不足,提出一种基于检测代理的应用级双机管理系统设计方法。系统模型以服务、应用进程和资源为单位进行实时检测和管理,从而实现负载均衡的功能。实验结果证明,该方法能够有效提高系统运行的稳定性和可靠性。     

Energy optimal spacecraft attitude control subject to convergence rate constraints

Attitude control of operational satellites is still predominantly performed by standard controllers such as Proportional plus Derivative (PD) control laws, which are still preferred for implementation to the computationally intensive nonlinear optimal control techniques, representing higher implementation complexity. In this paper, an inverse optimal control approach based on phase space geometry is presented, which is easy to implement and free from numerical and computational issues. The optimal control objective is to minimize a norm of the control torque subject to a rapidity constraint on the convergence rate of a Lyapunov function, under the effect of a benchmark controller. The proposed optimization method is shown to significantly enhance the torque-rapidity trade-off compared to the benchmark controller, chosen to be a PD law then a sliding mode controller. The inverse optimal control scheme is implemented on an air bearing table experimental platform.     

Solar or surplus heat-driven actuators using metal hydride alloys

A metal hydride (MH) actuator provides mechanical work by applying the hydrogen pressure transition that originates from the reversible reaction of the MH alloy as it absorbs and desorbs hydrogen gas. The MH actuators that have been reported employ a Peltier element or an electrical heating resistance wire as a heat source. This paper describes the design of an MH actuator that is driven by low-quality heat sources, such as solar heat or surplus heat. A certain composition of a LaNi₅-based alloy that produces desorbing and absorbing reactions through a low-temperature difference is specified. This alloy composition can provide a large amount of hydrogen desorption using solar heat or surplus heated water and a large amount of hydrogen absorption by natural air cooling in an adequate reaction time. To improve the moving speed and to control the performance, a reciprocating air compressor that applies this solar or surplus heat-driven MH actuator is proposed. These findings support the efficacy of an MH actuator operating without electric or fossil fuel energy consumption.     

Selecting and conserving lands for biodiversity: The role of remote sensing

A major focus of conservation is on protecting areas to ensure the persistence of biological diversity. Because such areas may be large, not easily accessible, subject to change, and sensitive to the surrounding landscape, remote sensing can be a valuable tool in establishing and managing protected areas. We describe three case studies to illustrate how remote sensing can contribute to setting priorities for conservation actions, monitoring the status of conservation targets, and evaluating the effectiveness of conservation strategies. In the Connecticut River watershed, remote sensing has been used to assess flood regimes and identify key areas of floodplain forests and their context for conservation planning. At Eglin Air Force Base in Florida, remote sensing has provided information to assess the effectiveness of management strategies to restore fire to the longleaf pine sandhills ecosystem, control invasive species, and prioritize annual prescribed burns. In eastern US forests, remote sensing is being used to evaluate the ecological condition and changes at properties where direct access would be difficult.As the resolution and capacities of remote-sensing technology continue to develop, however, several issues are becoming increasingly important. It is essential that the spatial and temporal resolution of remote-sensing data be matched to the relevant scales of biodiversity, major threats, and management actions. Data layers must be compatible, both in scale and in measurement properties, and key patterns must be distinguished from irrelevant detail, especially at the finer scales of application in local management. Combining remote sensing with ground surveys can expand the array of information used in management and contribute to the ecological interpretation of remote-sensing data. Because conservation funds are always limited, remote sensing also must be cost effective. This requires balancing the wealth of detail afforded by ever-finer resolution of remote-sensing data with what is actually needed to implement sound conservation and management. Remote sensing is a valuable tool, but it is not a panacea for all of the challenges of conservation monitoring and management.     

空心互感式位移传感器

本文介绍一种空心互感式位移传感器,其工作原理是采用开关方式,以恒流源双向向空心互感的原边线圈充放电,采样副边线圈在稳定放电期间的窄脉冲高度来测量位移量,量程可达20mm,相对精度为2%。论述了互感值的测量,分别设计了轴向和径向两个位移的试验及捕获采样数据的电路,从数据分析证明该方法可以测量位移,减少了空心线圈中的干扰对测量的影响,轴向位移还可以直接测量电介质材料的厚度。     

Air temperature estimation with MSG-SEVIRI data: Calibration and validation of the TVX algorithm for the Iberian Peninsula

Air temperature can be estimated from remote sensing by combining information in thermal infrared and optical wavelengths. The empirical TVX algorithm is based on an estimated linear relationship between observed Land Surface Temperature (LST) and a Spectral Vegetation Index (NDVI). Air temperature is assumed to be equal to the LST corresponding to the effective full vegetation cover, and is found by extrapolating the line to a maximum value of NDVI_max. The algorithm has been tested and reported in the literature previously. However, the effect of vegetation types and climates and the potential variation in NDVI of the effective full cover has not been subject for investigation. The present study proposes a novel methodology to estimate NDVI_max that uses observed air temperature to calibrate the NDVI_max for each vegetation type. To assess the validity of this methodology, we have compared the accuracy of estimates using the new NDVI_max and the previous NDVI_max that have been proposed in literature with MSG-SEVIRI images in Spain during the year 2005. In addition, a spatio-temporal assessment of residuals has been performed to evaluate the accuracy of retrievals in terms of daily and seasonal variation, land cover, landscape heterogeneity and topography. Results showed that the new calibrated NDVI_max perform well, with a Mean Absolute Error ranging between 2.8 °C and 4 °C. In addition, vegetation-specific NDVI_max improve the accuracy compared with a unique NDVI_max.     

半透膜仪采集空气中多氯联苯采样速度与其结构和性质定量构效关系研究

根据MOPAC2009软件包中PM6算法得到的分子描述符研究半透膜仪(SPMDs)采集大气中多氯联苯(PCBs)采样速度(R_(air))的定量构效关系(QSPR)模型,并分析影响R_(air)的关键因素。以半经验PM6算法得到的分子量子化学描述符作为预测变量,采用偏最小二乘算法(PLS)构建了R_(air)的QSPR模型。根据交叉验证,所得到的最佳模型中PLS成分解释的因变量的累积变异(Q~2_(cum))为0.683,这表明该模型具有良好的预测能力和稳健性。通过外部验证和将实验测得的R_(air)与预测得到的R_(air)进行比较,对所构建模型的稳定性和可靠性进行了验证,结果表明无论是训练组还是预测组,其预测值与实测值间均具有较好的线性关系,线性相关系数均大于0.8376。对PCBs采样速度R_(air)的主要影响因素为PCBs与SPMDs中甘油三油酸酯分子间的相互作用大小和为将PCBs溶解在甘油三油酸酯中形成洞穴所需能量要求。     

Amperometric biosensor for formic acid in air

The possibility of developing a simple, inexpensive and specific personal passive “real-time” air sampler incorporating a biosensor for formic acid was investigated. The sensor is based on the enzymatic reaction between formic acid and formate dehydrogenase (FDH) with nicotinamide adenine dinucleotide (NAD⁺) as a co-factor and Meldola's blue as mediator. An effective way to immobilise the enzyme, co-factor and Meldola's blue on screen-printed, disposable, electrodes was found to be in a mixture of glycerol and phosphate buffer covered with a gas-permeable membrane. Steady-state current was reached after 4–15 min and the limit of detection was calculated to be below 1 mg/m³. However, the response decreased by 50% after storage at −15°C for 1 day.     

200MW乏气送粉机组主蒸汽温度控制优化方案

本文在常规火电厂主蒸汽温度自动控制方案的基础上,对200MW乏气送粉机组的特性进行了分析,结合锅炉主要参数与主蒸汽温度自动控制的相互关系,以及相关的工艺要求,提出了一种新的优化方案。