不同预处理条件下纤维素的结构变化及其在DMAc／LiCI中的溶解

介绍了乙二胺、氢氧化钠和高温等三种不同的纤维素预处理方法。研究预处理后纤维素的结构变化，讨论预处理过程中的转化机理，并通过X射线衍射对纤维素结晶度的变化进行表征，证明乙二胺预处理后纤维素的结晶度下降最大。纤维素经过预处理后可以溶解在DMAc／LiCI中，讨论其溶解机理，通过对比三种预处理纤维素的溶解性能，表明经过乙二胺预处理之后的纤维素在DMAc／LiCI中溶解性能最好，氢氧化钠预处理的纤维素次之，高温预处理的纤维素溶解性能相对较差。     

自重施加方式对高拱坝廊道结构应力及配筋的影响

自重工况一般是高拱坝内廊道配筋设计的控制工况,由于高拱坝施工过程的特殊性及复杂性,有限元计算中自重有多种施加方式。结合工程实例,对高拱坝基础廊道结构进行三维有限元分析,比较不同自重施加方式对廊道结构应力及配筋的影响。研究结果表明:按整体自重考虑时,廊道结构应力及配筋面积明显偏小;全部按分缝自重考虑时,廊道结构应力及配筋面积明显大于按施工过程考虑自重的结果;为符合实际施工过程及结构承载规律,保证结构安全及经济合理,在拱坝结构的有限元计算中应按照施工过程考虑自重荷载。该研究成果对泄洪孔结构的应力分析也具有参考价值。     

熔加色素法搪瓷色釉结构的研究

用ＳＥＭ、ＷＤＳ、ＩＲＲＳ、ＸＰＳ和ＡＳＳ对搪瓷色釉结构进行了研究熔加法的搪瓷色釉具有均匀分布的小尺寸、数量小的气孔。分析了搪瓷色釉的Ｏ１ｓ谱，并分解了成桥氧、非桥氧、及自由氧。熔加法的桥氧浓度远大于磨加法，而熔加法的非桥氧的浓度远低于磨加法，这表明熔加法的搪瓷色釉的结构强度高于磨加法。     

70500系列调节阀在大型尿素装置中的应用

介绍Ｍａｓｏｎｅｉｌａｎ公司生产的７０５００系列调节阀的结构，特点，并阐述部分调节阀在使用中存在的问题及改进措施。     

An EXAFS study on oxidic and sulfided K-MoO3/γ-Al2O3 catalysts

By analyzing the extended X-ray absorption fine structure (EXAFS) of the Mo K-absorption edge, structural information for both oxidic and sulfided K-MoO₃/-Al₂O₃ catalysts with different potassium content was obtained. The oxidic samples show two backscatterer peaks in the radial distribution function (RDF), which correspond to the Mo-O coordinations in the nearest Mo-O shell. The nearest oxygen atoms are present with large configurational disorder. The RDF for the K/Mo = 0 sample is significantly different from that for crystalline MoO₃ and ammonium heptamolybdate. The RDFs for potassium promoted samples are, in some extent, similar to that for ammonium heptamolybdate. The sample with K/Mo = 0.8 and that with K/Mo=1.5 do not show obvious difference in their local Mo-O structures. The EXAFS results support the earlier conclusions from Raman spectroscopy studies on identical samples [7]. When the samples are sulfided, a rearrangement of the local neighbors around Mo atoms takes place, to form small MoS₂-like crystallites. The Mo-S and Mo-Mo coordination distances on these catalysts are the same as those in crystalline MoS₂, but the coordination numbers are significantly lower than in MoS₂. The EXAFS results indicate that Mo species on the K/Mo=0 catalyst mainly consist of Mo-S-Mo units (the basic building units of MoS₂), which are highly dispersed and show a higher level of disorder than in MoS₂. With the modification by the potassium promoter, Mo species are significantly aggregated and their local neighbors are more similar to those in MoS₂, but the Mo species still exist in a state of high dispersion.     

A predicted three-dimensional structure for the human immunodeficiency virus binding domains of CD4 antigen

A predicted three-dimensional structure of the two N-terminalextracellular domains of human CD4 antigen, a cell surface glycoprotein,is reported. This region of CD4, particularly the first domain,has been identified as containing the binding region for theenvelope gp120 protein of the human immuno-deficiency virus.The model was predicted based on the sequence homology of eachdomain with the variable light chain of immunoglobulins. Theframework ß-sheet regions were taken from the crystalcoordinates of REI. For one region in the first domain of CD4there was an ambiguity in the alignment with REI and two alternatemodels are presented. Loops connecting the framework were modeledfrom fragments selected from a database of main chain coordinatesfrom all known protein structures. Residues identified as involvedin binding gp120 have been located in several other studieswithin the first domain of CD4. Epitopes from eight monoclonalantibodies have been mapped onto residues in both domains. Competitionof these antibodies with each other and with gp120 can be interpretedfrom the structural model.     

用固体核磁技术分析PE 100管材料的抗熔垂性

用固体核磁技术分析了2种具有不同抗熔垂性能的聚乙烯管材料的凝聚态结构与流变性能。管材树脂的抗熔垂性能与其核磁迟豫特性紧密相关,好的抗熔垂性能对应更长的纵向迟豫时间。抗熔垂性能好的双峰管材料的重均分子量更高,高相对分子质量部分的含量更多。     

尼龙斜交载重轮胎早期损坏原因及解决方法探讨

针对尼龙余交载重轮胎使用过程中出现的早期损坏，分析了其使用因素和设计因素，从配方设计、结构设计等方面提出了相应的解决方法。同时认为加强工艺控制与结构、配方设计对轮胎性能的影响同等重要。     

采用不同锰源合成尖晶石LiMn2O4正极材料

The spinel LiMn2O4 cathode material was synthesized with the solid-state reaction method. Four manganese compounds including electrolytic manganese dioxide (EMD), MnCO3, Mn3O4 and nano-EMD were used as Mn sources while LiOH·H2O was used as the uniform Li source. The crystal structure characteristics of these samples produced were investigated by means of XRD, SEM, particle size distribution analysis and specific surface area testing. Their electrochemical properties were also studied by comparing their specific capacity, charge and discharge efficiency and cycle performance.     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系