可编程计算器辅助测量施工放线

昌马水库工程是甘肃省重点工程，在施工中对测量放线要求较高，为了提高放线精度及效率，在放线中引入可编程序的casio fk一4500P计算器配合，迅速处理放线数据，取得了可喜的效果。     

Synthesis,Properties, and Photopolymerization of Liquid‐Crystalline Oxetanes: Application in Transflective Liquid‐Crystal Displays

Mixtures of liquid‐crystalline di‐oxetanes and mono‐oxetanes are made for the purpose of making birefringent films by photopolymerization. The composition of a di‐oxetane mixture that forms spin‐coated films of planarly aligned nematic monomers is reported. These films are photopolymerized in air. The molecular order of the monomers can be changed on the microscale to form thin films with alternating birefringent and isotropic parts by using a combination of photopolymerization and heating. The interface observed between the birefringent and isotropic 10 μm × 10 μm domains is very sharp and the films show hardly any surface corrugation. In addition, the polymerized films are thermally stable, making them very suitable for use as patterned thin‐film retarders in high‐performance transflective liquid‐crystal displays (LCDs) which satisfy customer demand for displays that are brighter and thinner and that deliver better optical performance than conventional LCDs with an external non‐patterned retarder.     

液闪测氡中闪烁杯的氡气泄漏

本文简要介绍了液闪测氡中氡气自闪烁杯泄漏的实验结果。实验中对三种玻璃闪烁杯盖的密封性能作了检查,结果表明,这三种闪烁杯均不能满足液闪法测氡中对氡的密封要求。采用一层1mm 厚的橡胶垫片和一层0.01mm 厚的铝化聚脂膜作衬垫,代替原来的聚乙烯或纸板衬垫,解决了其中两种闪烁杯的氡气泄漏问题。建议在使用商品闪烁杯测氡时,应首先检查其对氡的密封性,必要时需采取补救措施,以保证测量结果的可靠性。     

Integration of solvent extraction and liquid membrane separation: An efficient tool for recovery of bio-active substances from botanicals

An integrated process based on simultaneous solid-liquid extraction and liquid membrane separation is proposed for recovery and isolation of valuable species from botanicals. This integration provides complete exhausting of the solid material even in the case of very low solubility of the specified solute in the extracting solvent. Selectivity of the liquid membrane ensures a preferential transport of the desired solute from the native extract into the strip solution, while the other co-extracted species remain predominantly in the native extract.     

Disentangling achievement orientation and goal setting: Effects on self-regulatory processes.

H. Heckhausen and J. Kuhl's (1985) goal typology provided the conceptual foundation for this research, which examined the independent and integrated effects of achievement orientation and goal-setting approaches on trainees' self-regulatory activity. Using a complex computer-based simulation, the authors examined the effects of 3 training design factors--goal frame, goal content, and goal proximity--cutting across these 2 theoretical domains on the nature, focus, and quality of the self-regulatory activities of 524 trainees. Results revealed that all 3 factors had a significant influence on self-regulation, with goal content exhibiting the greatest influence. In line with expectations, congruent learning frame and content compared with congruent performance frame and content was beneficial for trainees' self-regulatory activity, incongruent combinations of goal frame and content were better than congruent performance frames and content, and effects for the incongruent combinations cutting across the domains were asymmetrical. Theoretical extensions for further disentangling these distinct domains and training design implications are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of Plate Oscillation on Bubble Residence Time in an Aerated Stagnant Liquid

Gas transfer efficiency during absorption is an important factor in various technological processes involving the interaction between liquid and gaseous systems. It is known that gas bubble motion characteristics strongly affect the efficiency of mass transfer during gas absorption. A device for mechanical vibration of an aerated liquid was designed, based on a cylindrical column filled up with tab water and a plate oscillating in the vertical direction. The goal of the present study is to investigate the effect of vibration parameters such as amplitude, frequency and form of the applied signal on the efficiency of the oxygenation process. Bubble residence time in the liquid and bubble depth of submergence related to the oscillating plate surface were chosen as main parameters for measurements. Furthermore, experiments were conducted to study the effect of the design parameters of the vibrating plate on bubble motion characteristics. The resultant data show that bubble residence time and depth of submergence can be controlled by changing the amplitude, the frequency and the form of the vibration field applied.     

Liquid phase epitaxial growth of pure and doped GaSb layers: morphological evolution and native defects

Undoped and Te-doped gallium antimonide (GaSb) layers have been grown on GaSb bulk substrates by the liquid phase epitaxial technique from Ga-rich and Sb-rich melts. The nucleation morphology of the grown layers has been studied as a function of growth temperature and substrate orientation. MOS structures have been fabricated on the epilayers to evaluate the native defect content in the grown layers from theC-V characteristics. Layers grown from antimony rich melts always exhibitp-type conductivity. In contrast, a type conversion fromp- ton- was observed in layers grown from gallium rich melts below 400 C. The electron mobility of undopedn-type layers grown from Ga-rich melts and tellurium doped layers grown from Sb- and Ga-rich solutions has been evaluated. Paper presented at the poster session of MRSI AGM VI. Kharagpur. 1995