ULSI中的铜互连线RC延迟

随着ULSI向深亚微米特征尺寸发展，互连引线成为ULSI向更高性能发展的主要限制因素。由互连引线引起的串扰噪音及RC延迟限制了ULSI的频率性能的提高，同时考虑到电迁移和功率损耗，人们开始寻找新的互连材料；低电阻率的铜互连材料和低介电常数介质的结合可以有效地发送互连线的性能，主要讨论了互连延迟的重要性以及发送和计算延迟的方法。     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

圆筒形铸件缩松缩孔的产生原因及解决方法

针对圆筒形铸铁辊体冒口端面产生的缩松、缩孔缺陷，进行了举例说明、系统分析，找到了缺陷产生的原因及影响因素。通过解决措施的应用与实施，有效地克服了圆筒形辊体铸件冒口端面产生的缩松、缩孔缺陷，同时应用到其它大型圆筒形铸件中，都得到了良好效果。     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

英台地区天然水驱油藏的开发特点及稳产技术

掌握边底水运动规律，控制并利用活跃的边底水能量，是成功开发天然水驱油藏的关键。英台地区的英台、四方坨子和一棵树等三个油田均为天然水驱油藏，天然能量充足。油藏投入开发后初期含水较高，含水上升极快，造成产油量大幅度递减。针对其开发特点，适时采用大泵、电潜泵提液强采，通过大量补孔层间接替以及加密调整和扩边等稳产技术措施，确保了油藏以3％-5％的采油速度长期稳产，水驱采收率高达50％以上。     

Matrix mediated alignment of single wall carbon nanotubes in polymer composite films

Alignment of single wall carbon nanotubes (SWNT) in liquid crystalline (LC) polymer matrix imparting orientation to the nanotubes along the nematic director was studied by atomic force microscopy, measurements of electrical conductivity and Raman spectroscopy of the composite in the directions parallel and perpendicular to the nematic director. The composites were prepared through dispersion of SWNT with LC monomer in a common solvent, their alignment in nematic monomer and consequent UV polymerization of the monomer. The anisotropy of electrical and optical properties of the system depends strongly on the concentration of the nanotubes in the range of 1-10% SWNT being especially strong for smaller concentrations and negligible at higher loads. A simple semi-quantitative model is suggested to account for the orientational behavior of nanotubes in nematic matrices. It successfully describes the observed anisotropy of physical properties at microscale (up to 200 μm) in terms of anchoring of the polymer chains to the nanotubes surface and adjustment of the nanotubes orientation to the nematic direction due to such coupling. The increasing disorientation of the nematic domains at higher nanotubes loads is explained as a development of larger number of LC defects induced by the nanotubes in the nematic matrix due to their intrinsic nature of aggregation. The anisotropy of physical properties at macro scale (several millimeters) is much smaller and less dependable on SWNT concentration because differently oriented LC domains effectively wash out the anisotropy.     

铝合金穿孔板吸声墙面施工技术

以教育部综合办公楼工程的机房铝合金穿孔板吸声墙面施工为例,介绍其固定件及吸声墙面的做法。     

超声速燃烧室燃烧压力影响因素试验研究

采用试验研究的方法．在模拟飞行高度25km、来流马赫数6的情况下．在直连式试验台上对超燃冲压发动机燃烧室压力影响因素进行了初步研究。结果表明．燃料喷射位置的变化，改变了燃烧室内的放热区域，从而影响了燃烧室内的压力分布；在一定燃料当量比范围内．当量比越大燃烧室压力越高，但是当量比与燃料喷注压降耦合影响压力分布；在燃烧室后段设置深凹腔有利于提高燃烧室压力。     

管道内壁阴极保护技术

阴极保护技术已广泛应用于管道的外防腐,而在管道的内防腐中还存在只适用于大口径管道、保护距离短、阳极与管道内壁绝缘难、安装复杂等问题。为此,江汉油田设计院开展了管道内壁阴极保护技术研究工作。试验证明,管道内壁采用强制电流和牺牲阳极阴极保护完全可行,用在柔性阳极或带状锌合金、铝合金牺牲阳极上外套打孔塑料管或塑料网的安装方式成功地解决了管道内壁阴极保护存在的上述问题,具有适用范围广、施工工艺简单、经济方便等优点。文章着重介绍了塑料套管或塑料网阳极安装方式及其模拟试验、现场试验的条件和结果。     

土体中毛细水压力的研究

该文从毛细水产生负孔隙水压力概念入手 ,对较难确定的孔隙水压力系数以及较抽象的地下连续墙时效稳定分析等问题进行了定量计算 ,以期对工程实践有一定的指导作用