煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

煤代油方式的经济性分析

对两种煤代油方式——水煤浆和煤制混合煤气进行了燃料价格、设备投资及运行费用的分析对比。结果表明，两种代油方法均有可观的经济效益，燃料费用可分别节约52．4％和45．2％。如果原燃油工业炉窑由于工艺需要已装有除尘设备而又可用产生的蒸汽做雾化剂时，则水煤浆代油更具有经济优势。     

Emission of trace toxic metals during pulverized fuel combustion of Czech coals

A study of the trace elements emission (As, Se, Cd, Co, Cr, Cu, Zn, Hg, Tl, Pb, Ni, Sn, Sb, V, Mn and Fe) from pulverized coal combustion has been made at six heating and power stations situated in the Czech Republic. The amount of chlorine in coal has considerable influence on volatilization of some elements such as Zn, Cu, Pb, Hg and Tl, which is explained by the formation of thermodynamically stable compounds of these elements with chlorine. Generally, the affinities for Cl follows the order Tl > Cu > Zn > Pb > Co > Mn > Sn > Hg. The experimental data indicates enrichment of some of the trace toxic elements in the emissions (Cu, Zn, As, Se, Cd, Sn, Sb, Hg and Pb) and good agreement was obtained by thermodynamic equilibrium calculations with a few exceptions. In the case of Fe, Mn, Co, Cr and Sn calculated values are overestimated in the bottom ash and there are zero predicted amounts of these elements in the fly ash. In comparison, the results from experiments show up to 80% of these elements retained in fly ash. This implies that there exist additional steps leading to the enrichment by Fe, Mn, Co, Cr and Sn of small particles. Such mechanisms could include the ejection during devolatilization of small inorganic particles from the coal of bottom ash particles, or disintegration of the char containing these metals to small particles of fly ash. On the other hand, there are slightly overestimated or similar values of relative enrichment factors for As, V, Cu, Cd, Sb, Tl and Pb in the fly ashes and zero predicted values for bottom ashes. Our experimental results show about 5% or less of these elements are retained in bottom ashes, so they probably remain in the bottom ash inside unburned parts of coal. Copyright © 2003 John Wiley & Sons, Ltd.     

40kg试验焦炉的研制

文章介绍了40kg试验焦炉，分析和比较了试验焦炉与生产焦炉的差异，指出它们之间的模拟条件是炭化室宽度、煤料堆密度、炼焦速度和单向传热。     

本钢炼焦煤最佳配比分析

结合本钢的生产实际，对炼焦煤的最佳配比作了比较具体的分析，同时对资源，质量、成本也作了比较详细的调查，并提出了本钢焦化厂最佳配煤比方案，由此可看出，最大限度地降低采购成本，继续开发合理的配煤比例，具有广阔的前景。     

眼球的自动定位

提出了一种由粗到细自动定位人脸的一个重要特征即眼球圆心的方法，该方法综合运用局部二值化，霍夫变换，像纱聚类，边缘提取等技术，对均匀或非均匀光照下拍摄或戴眼镜的照片都能获得很高的定位精度，适用于处理证件照。     

新疆三塘湖盆地侏罗系煤有机地球化学特征

有机地球化学和有机岩石学研究结果表明，新疆三塘湖盆地侏罗系煤中富集孢子体和角质体（３．０％～６．０％，全岩体积百分比），对煤中氯仿沥青“Ａ”组成中较高的总烃馏分（３０％～５０％）和饱芳比（０．６～３．０）产生了影响。煤的聚集环境是影响煤的显微组分组成及生油特性的关键因素。三塘湖盆地侏罗系煤属于“晚生晚排”叠加有“早生早排”类型的烃源岩。     

锚网支护在综采工作面开切眼中的应用

介绍了平煤集团一矿在戊8— 310 40综合机械化采煤工作面开切眼实施煤巷锚网支护的基本情况。总结了经验 ,为同类条件下的锚网支护设计提供了依据。     

Apparent versus true density for the volume-to-weight transformation in coal blends

This work reviews the procedures involved in the conversion of the petrographic characterization data of blended coals into weight percentages of the single coals in the blends, the selection of the most suitable parameter for describing the density of the coals being critical. First, the fundamentals of the volume-to-weight transformation of the petrographic data were developed by means of mathematical formulae. This part of the procedure highlighted the need to use a density value adapted to the resolving power of the optical microscope. It was found that mercury penetration at 5 MPa, as determined by mercury porosimetry, was best suited for this purpose. A literature survey of published coal density data revealed that the use of correlations between coal density and rank was not an accurate enough procedure to deal with the relatively low corrections involved in the transformation of petrographic data. In the end, three binary blends were prepared from six carefully selected coals and polished particulate blocks of these blends were petrographically analysed to determine their compositions on a volume per cent basis. The best fit of these volume percentages with the weight percentages used in the formulation of the blends was found for a density correction based on mercury penetration at 5 MPa, in agreement with the empirical analysis.