电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

The boundary contour method for two-dimensional Stokes flow and incompressible elastic materials

 A variant of the boundary element method, called the boundary contour method (BCM), offers a further reduction in dimensionality. Consequently, boundary contour analysis of two-dimensional (2-D) problems does not require any numerical integration at all. While the method has enjoyed many successful applications in linear elasticity, the above advantage has not been exploited for Stokes flow problems and incompressible media. In order to extend the BCM to these materials, this paper presents a development of the method based on the equations of Stokes flow and its 2-D kernel tensors. Potential functions are derived for quadratic boundary elements. Numerical solutions for some well-known examples are compared with the analytical ones to validate the development. Received 28 August 2001 / Accepted 15 January 2002     

THE SIMULATION OF THE SAR IMAGE OF INTERNAL SOLITARY WAVES IN ALBORAN SEA

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＯｃｅａｎｉｎｔｅｒｎａｌｗａｖｅｉｓａｋｉｎｄｏｆｇｒａｖｉｔｙｗａｖｅｇｅｎｅｒａｔｅｄｉｎｔｈｅｓｔｒａｔｉｆｉｅｄｏｃｅａｎ .Ｉｔｐｒｏｄｕｃｅｂｙｔｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｔｉｄｅｃｕｒｒｅｎｔａｎｄｔｏｐｏｇｒａｐｈｙ ,ｓｅａｑｕａｋｅａｎｄｍｏｖｉｎｇｓｈｉｐｗｈｅｎｔｈｅｓｔｒｏｎｇ ,ｓｈａｌｌｏｗｐｙｃｎｏｃｌｉｎｅｉｓ ｐｒｅｓｅｎｔ.Ｔｈｅｉｎｔｅｒｎａｌｗａｖｅｓｉｎｔｈｅｃｏｎｔｉｎｅｎｔａｌｓｈｅｌｆａｒｅａｌｍｏｓｔｔｉｄｅｐｒｏｄ…     

EWB应用于模拟电路分析的研究

介绍了将EWB用于“模拟电子技术”的课堂教学时，虚拟实验测量结果与理论计算值不一致时，如何去分析并解决问题。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

表面粗糙度的自动确定

根据零件精度，在CAD系统中能够快速、准确地自动确定其表面粗糙度，从其间接关系上分析并推导出了一套实用的换算公式，并使用在某CAD中。     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

臭氧在食品加工用水处理工程上的应用

本文叙述了臭氧的一些特性 ,并以烟台某食品加工公司食品加工用水处理工程为例 ,介绍了臭氧的产生及应用情况 ,提供了处理前后水中各项指标的对照