“四低一高”工艺在85kA预焙槽的应用与优化

本文介绍了“四低一高”(低电解温度、低分子比、低氧化铝浓度、低阳极效应系数、高工作电压)工艺技术条件在85kA预焙槽上的应用与优化,实验证明“四低一高”工艺需要针对具体槽型进行优化设计,适宜的技术条件对提高电流效率、降低直流电耗,节能效果显著。     

A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

磁热效应的直接测量及装置

磁热效应的测量有间接测量和直接测量两种方法。本文在比较两种测量方法各自特点的基础上,重点综述了直接测量装置的种类及特点;指出直接测量装置在室温磁制冷技术研究中的重要作用。     

外商直接投资对上海国内投资的挤出效应研究

建立了衡量挤入、挤出效应的数量模型，利用模型定量地讨论了外商直接投资(FDI)对上海国内投资的挤入、挤出效应，得到了外商直接投资对上海国内投资存在挤出效应的结论，并分析了产生挤出效应的原因。     

中压电动机传统起动方式的危害性

本通过对中压电动机的几种传统起动方式的探讨分析，阐述了使用这些方法对电网和周围其他用电设备产生的不利影响，提出了改进措施。     

滴注式直-压淬双排渗碳线的设计及应用

详细阐述了滴注式直-压淬两用双排气体渗碳自动线的组成单元，渗碳气氛、工艺柔性化、设计特点以及工艺调试；生产实践证明：自动线运行可靠．稳定，主要技术性能和指标达到或优于国家标准。     

一种工艺过程流体强化装置

介绍了一种提高工艺过程效率的强化装置,即通过在过程设备上设置振荡装置,使过程设备内的流体产生扰动,破坏流动边界层,使流体获得附加雷诺数提高流动的湍流程度,达到强化过程设备内工艺过程的目的。该强化装置的调节弹性大,适应范围宽。调节强化装置中转子的转速、几何尺寸、空间位置和方向等参数或更换挡板形式,就能适应各种工艺过程条件。该装置可用于传热、传质及化学反应等多种过程,以提高过程效率,节约能源和资金,减小设备体积,并可将机械搅拌类的间歇过程转化为连续过程。     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

自适应RBF神经网络在CDMA移动通信上行链路功率控制中的应用研究

提出了一种自适应RBF神经网络功率控制方案。详细研究了该网络在DS-CDMA通信中，进行上行链路闭环功率控制(基于信扰比(SIR))的应用理论，给出了该网络参数的计算方法。最后用计算机仿真法模拟出该控制器的运行性能。结果表明基于SIR的自适应RBF神经网络功率控制器能自适应地调整移动台的发射功率，使基站接收信号的信扰比始终非常接近于一个常数，且有比定步长功率控制更小的SIR跟踪误差，从而可以降低接收信号的中断概率、提高信道容量。