生烧石灰对氧化铝生产过程的影响及石灰炉热工现状分析

由于反苛化作用，生烧石灰对氧化铝生产的循环效率、溶出和蒸发工序有很大的影响。本文对石灰生烧的热工现状进行了热平衡验算，从热工的角度分析了石灰烧制中存在的缺陷，通过热工计算，提出了改善石灰烧制质量的建议，以消除其在生产过程的危害及实现增效的目的。     

热舒适条件下环境风速和温度最佳组合的实验研究

文章从人体与热环境的基础理论出发，着重对影响人体与环境之间对流换热的主要因素———温度和气流速度进行了实验研究，并得出相应结论，给出了热舒适条件下二者的最佳组合数学模式。     

仪表空气干燥器控制系统的升级改进

利用工厂现有优势资源,自主对故障率逐步升高的仪表空气干燥器控制系统进行升级改进,从而提高重要单元设备运行的可靠性。     

基于激光多普勒测速法的2×106m/s2高冲击校准技术

在高冲击传感器动态性能校准中,实现高量程、宽脉冲激励是目前高冲击校准急需解决的问题。采用速度改变法校准原理,以气炮为激励源,利用激光多普勒测速方法测量砧体运动速度,建立高冲击校准系统。分析碰撞系统的作用原理,提出调整和控制激励脉宽的方法;分析测速误差,提出双光束差动侧向测速方法。实验结果表明:高冲击校准系统校准量程为2×106m/s2,激励脉宽在2×106m/s2时大于100μs,校准冲击灵敏度的扩展不确定度小于5%(k=2)。     

改进BP网络在航材需求预测中的应用

针对航材备件需求预测问题,在对影响航材备件需求量的多个因素进行分析研究的基础上,运用改进BP神经网络算法进行预测的仿真实验。实验结果表明,改进BP神经网络能够对积累的历史数据进行充分的应用,并且有较高的预测准确性。     

压风机恒压供风系统设计

针对某矿压风机往井下输送高压空气时存在输气总管压力波动大且调节困难的问题,设计了一种基于变频调速和闭环负反馈控制的压风机恒压供风系统。该系统通过输气总管上的压力传感器采集实时压力信号,与输入压力信号比较后得到偏差信号,PLC对偏差信号进行分析和处理,并输出相应的变频器调节信号,使变频器改变压风机电动机的电源频率,从而达到调节输气总管压力的目的。实际应用表明,该系统运行稳定、可靠,实现了输气总管高压空气的恒压输送。     

Environmental and climate justice and technological carbon removal

Environmental justice (EJ) and climate justice are becoming central foci of climate policy. Awareness is also growing on the need for some amount of carbon dioxide removal (CDR) to curb warming to 1.5 °C. In this paper we map dimensions of environmental and climate justice that stakeholders and communities will need to consider -- from local to global scales. Mapping issues is a step towards developing frameworks to undertake CDR in an environmentally just way.     

PAN/FPU Composite Nanofiber Membrane with Superhydrophobic and Superoleophobic Surface as a Filter Element for High-Efficiency Protective Masks

Recently, because of the outbreak of COVID-19, the demand for various types of filter elements in protective materials has increased globally. Furthermore, new requirements for the filtration performance of PM2.5 liquid (oil) particles have been put forward. In this work, Superhydrophobic and superoleophobic composite nanofibers with excellent filtration capacity for oil and salt particles are developed through the modification of polyacrylonitrile (PAN) by fluoro-polyurethane (FPU) doping. The results show that the PAN/FPU composite nanofibers doped with 9 wt% FPU has a uniform fiber morphology with a diameter of 240 ± 30 nm. Compared to the pure PAN nanofibers, the water-based contact angle of PAN/FPU increases from 90 ± 5° to 151 ± 5°, and the oil-based contact angle increases from 58 ± 2° to 152 ± 3°. Importantly, at a high flow rate of 95 L min⁻¹, the filtration efficiency of the PAN/FPU nanofiber membrane for 0.3 µm oil particles increases from 92 ± 1% to 99.2 ± 0.1%. After cyclic loading, the filtration efficiency of 0.3 µm oil particles remains above 98%. Meanwhile, the filtration efficiency for 0.3 µm salt particles remains at 98.23 ± 0.1%. The PAN/FPU nanofiber membrane developed in this work is effective in applications and has good market prospects as a protective filtration material.     

浅议降低脉冲袋式除尘器运行费用的几点措施

脉冲袋式除尘器,因其具有良好的清灰效果,并可在较高的过滤风速下稳定运行,因而在袋式除尘器中,占有极其重要的地位。本文介绍了如何降低脉冲袋式除尘器的运行费用,并提出了相应的措施及其在设计中应注意的问题。     

空压机叶片腐蚀分析

空压机第三级叶轮的叶片严重腐蚀，经光谱、能谱及X射线分析，结果表明光叶腐蚀是因进入空压机的空气中含有大量SO2有害气体和第二级中间冷却器放水器排水不正常，使第三级叶片处于含硫的酸性气氛中而引起的。