湿式氧化处理乙烯裂解废碱液

文章研究了WAO处理乙烯裂解废碱液的方法。在2L高压釜中进行了乙烯废碱液的湿式氧化实验研究，重点考察了反应温度、停留时间对乙烯废碱液中COD、S^2-,酚的含量的影响。结果表明，湿式氧化处理乙烯裂解废碱液是可行的，处理后污水中COD、S^2-,酚的去除率分别达到40％、98％和30％，达到了排放标准。     

Equilibrium and dynamics of acetylene sorption in multiwalled carbon nanotubes

Multiwalled carbon nanotubes (MWCNT) were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and by adsorption of N₂ and acetylene. The dynamics of acetylene sorption was studied by frequency response spectroscopy. The average tube dimension and the shell number were determined from a statistical evaluation of the TEM images. This value agreed with that obtained from XRD via the Scherrer equation only if a shape factor of 0.49 was used. The diffusion of acetylene in the nanotubes of the MWCNT sample was found to be the rate-controlling step of the sorption process. Relationships between the tube dimensions and the equilibrium and dynamic sorption properties were demonstrated.     

刚玉瓷指痕缺陷的研究

本文采用两种不同Al2O3粉为原料，结合Al2O3预烧与材料的生产工艺，对刚玉瓷的指痕缺陷及其对材料性能的影响进行了研究。结果发现：Al2O3粉预烧温度不匀时，部分颗粒（γ-Al2O3）周边存在层错缺陷，激活能的存在，人体中颗粒粘连（团聚）；该团聚体在坯体及烧结体中的残留直接引起烧结体中的结构缺陷，由Al2O3预烧温度高且均匀的粉体制备材料，才能获得具有优良性能的刚玉体。     

Field trapping of threeEpinotia species with (Z,Z)-7,9-dodecadienyl acetate (Lepidoptera: Tortricidae)

Field survey of the geometrical isomers of 7,9-dodecadienyl alcohol, acetate, and aldehyde has resulted in attractants and inhibitors for three species of tortricid moths.Epinotia silvertoniensis and an undescribedEpinotia sp. were all attracted to (Z,Z)-7,9-dodecadienyl acetate. AnotherEpinotia sp. was attracted to (Z,Z)-7,9-dodecadienyl acetate and (Z,Z)-7,9-dodecadien-1-ol. Electroantennogram data and inhibition patterns for one of theEpinotia sp. are also reported. In addition,E. criddleana was attracted to lures containing (E)-9-dodecenyl acetate.     

Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene

Carbon-encapsulated Fe nanoparticles with size between 5 and 20 nm were synthesized via a picric acid-detonation-induced pyrolysis of ferrocene, which is characterized by a self-heating and extremely fast process. The nanoparticles exhibit well-constructed core-shell structures, with bcc-Fe cores and graphitic shells. The graphitic shells can protect effectively the cores against the attack of HNO₃ solution. The formation of the core-shell nanoparticles can be selectively controlled by adjusting the composition of the picric acid-ferrocene mixture, which determines C/Fe atomic ratio of the reaction system. The core-shell nanoparticles are preferably formed at low C/Fe atomic ratios, while tubular structures are formed at high C/Fe ratio. The possible pathway for the carbon-encapsulated Fe nanoparticles formation is discussed briefly.     

Effect of carbon fiber surface functional groups on the mechanical properties of carbon-carbon composites with HTT

The present investigation describes the quantitative measurement of surface functional groups present on commercially available different PAN based carbon fibers, their effect on the development of interface with resol-type phenol formaldehyde resin matrix and its effect on the physico-mechanical properties of carbon-carbon composites at various stages of heat treatment. An ESCA study of the carbon fibers has revealed that high strength (ST-3) carbon fibers possess almost 10% reactive functional groups as compared to 5.5 and 4.5% in case of intermediate modulus (IM-500) and high modulus (HM-45) carbon fibers, respectively. As a result, ST-3 carbon fibers are in a position to make strong interactions with phenolic resin matrix and HM-45 carbon fibers make weak interactions, while IM-500 carbon fibers make intermediate interactions. This observation is also confirmed from the pyrolysis data (volume shrinkage) of the composites. Bulk density and kerosene density more or less increase in all the composites with heat treatment up to 2600 °C. It is further observed that bulk density is minimum and kerosene density is maximum upon heat treatment at 2600 °C in case of ST-3 based composites compared to HM-45 and IM-500 composites. It has been found for the first time that the deflection temperature (temperature at which the properties of the material start to decrease or increase) of flexural strength as well as interlaminar shear strength is different for the three composites (A, B and C) and is determined by the severity of interactions established at the polymer stage. Above this temperature, flexural strength and interlaminar shear strength increase in all the composites up to 2600 °C. The maximum value of flexural strength at 2600 °C is obtained for HM-45 composites and that of ILSS for ST-3 composites.     

氟树脂涂料及其应用

综述了氟树脂的化学结构及氟碳涂料的优异性能，介绍了PVDF、PTFE、FEVE等几种主要氟树脂涂料的特点及其应用，阐述了氟树脂涂料的发展动向。     

现代汽车与复合材料

综述了高分子基复合材料的分类、各种基体和增强材料以及高分子基复合材料在汽车工业上广泛应用的情况;详细介绍了金属基复合材料、陶瓷基复合材料以及几种研发中的新型复合材料在现代汽车中研发应用的状况和前景。     

Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber

Zinc oxide (ZnO) nanoparticles assembled in one dimension to give rod‐shaped morphology were synthesized. The effect of these ZnO nanoparticles (average particle size ～ 50 nm) as the curing agent for carboxylated nitrile rubber was studied with special attention to cure characteristics, mechanical properties, dynamic mechanical properties, and swelling. These results were compared with those of the conventional rubber grade ZnO. The study confirmed that the ZnO nanoparticles gave a better state of cure and higher maximum torque with a marginal decrease in optimum cure time and scorch time. The mechanical properties also showed an improvement. There was an increase in tensile strength by ～ 120%, elongation at break by ～ 20%, and modulus at 300% elongation by ～ 30% for the vulcanizate cured with ZnO nanoparticles, as compared with the one containing rubber grade ZnO. Dynamic mechanical analysis revealed that the vulcanizates exhibited two transitions—one occurring at lower temperature due to the T_g of the polymer, while the second at higher temperature corresponding to the hard phase arising due to the ionic structures. The second transition showed a peak broadening because of an increase in the points of interaction of ZnO nanoparticles with the matrix. The tan δ peak showed a shift towards higher T_g in the case of ZnO nanoparticle‐cured vulcanizate, indicating higher crosslinking density. This was further confirmed by volume fraction of rubber in the swollen gel and infrared spectroscopic studies. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007