The Yield Stress of Gas/Liquid/Fibre Suspensions

Yield stress measurements of gas/liquid/fibre suspensions, were conducted to examine the effect of gas concentration as well as fibre concentration. Obtaining a well mixed stable pulp suspension with gas was difficult. A transparent model system consisting of glass fibres submersed in refractive index matched liquid gave stable suspensions and had the additional advantage of allowing visual observations. The measurements were performed in a baffled shear tester and concentrations were in the range of 0–12.5% vol. gas and 8–14% wt. fibres. Results show that yield stress decreases with increasing gas fraction for constant fibre concentrations. Since the fibre concentration is defined in the liquid phase, the amount of fibres decreases with increasing gas concentration. This fact alone partly explains the decrease in yield stress, but the gas also has a direct impact on the decrease in yield stress. Further, as expected, the yield stress increases with increasing fibre concentrations when the gas fraction is kept constant.     

柴油发动机活塞静强度分析

针对铁路运输向高速重载方向发展对机车发动机性能要求不断提高的问题,为确保柴油发动机工作的可靠性,对其活塞进行静强度分析.用HyperMesh建立某柴油发动机活塞的三维有限元模型,利用ANSYS对其进行有限元分析.综合考虑热负荷与机械负荷的耦合作用,确定活塞最大应力和最大应变分布的危险部位.分析结果可以为铁路机车柴油发动机活塞设计提供参考.     

基于改进符号化度量方法的机场噪声异常检测

机场噪声中的异常情况拥有很大价值,利用它能够及时完善飞机和机场的设备。结合机场噪声数据的特点,对上述问题进行研究并提出一种基于改进的符号化聚集近似(Symbolic Aggregate Approximation,SAX)相似性度量的单监测点的时间序列异常检测方法。其运用相似性度量方法计算出度量结果,再运用k近邻异常检测方法进行异常发现,最后发现异常时间段。该方法在理论验证可行性之后在某机场的实测数据中进行应用,取得了良好的效果。     

压力容器应力应变在线测量系统研究

应用Ｖｉｓｕａｌ Ｂａｓｉｃ软件开发了一套压力容器的应力采集与处理系统，将ＩＢＭ－３８６微机与ＹＪＤ－１７型应变仪联机，用微机来控制测点应变的采集与处理，并将大型结构分析软件ＳＡＰ５嵌入本系统。     

Universal yield stress function for biocompatible chitosan based-electrorheological fluid: Effect of particle concentration

Electrorheological (ER) response of biocompatible particles suspended in an insulating silicone oil, was investigated under several different applied external electric field strengths. Chitosan, a biodegradable polysaccharide, was used as anhydrous ER materials. The effect of particle volume concentration on their ER response was examined by focusing on the measurement for rheological and electrical properties. The yield stress of chitosan suspended in silicone oil system as a function of applied electric field strength showed different value of slopes for different particle concentrations, however, all data points collapse onto a universal scaling function.     

Shear rate dependence of viscosity and first normal stress difference of LCP/PET blends at solid and molten states of LCP

The liquid crystalline polymer (LCP) and polyethylene terephthalate (PET) were blended in an elastic melt extruder to make samples having 20, 40, 60, 80, and 100 wt % of LCP. Morphology of these samples was studied using scanning electron microscopy. The steady state shear viscosity (η), dynamic complex viscosity (η*) and first normal stress difference (N₁) were evaluated and compared at two temperatures: 265°C, at which LCP was in solid state, and 285°C, at which LCP was in molten state. The PET was in molten state at both the temperatures. The shear viscosity of the studied blends displayed its dependence on composition and shear rate. A maxima was observed in viscosity versus composition plot corresponding to 80/20 LCP/PET blend. The N₁ increased with LCP loading in PET and with the increased asymmetry of LCP droplets. The N₁ also varied with the shear stress in two stages; the first stage demonstrated elastic deformation, whereas second stage displayed dominant plastic deformation of LCP droplets. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2212–2218, 2007     

Modeling the tensile behavior of fiber bundles with irregular constituent fibers

In this article, the effect of fiber dimensional irregularities on the tensile behavior of fiber bundles is modeled with the finite element method. The fiber dimensional irregularities are simulated with sine waves of different magnitudes. The specific‐stress/strain curves of fiber bundles and their constituent single fibers are obtained and compared. The results indicate that fiber diameter irregularity along the fiber length has a significant effect on the tensile behavior of fiber bundles. For a bundle of uniform fibers of different diameters, all the constituent fibers will break simultaneously, regardless of the fiber diameter. Similarly, if fibers within a bundle have the same pattern and level of diameter irregularity along the fiber length, the fibers will break at the same time, also regardless of the difference in the average diameter of each fiber. In these cases, the specific‐stress/strain curve for the bundle overlaps with that of the constituent fibers. When a fiber bundle consists of single fibers with different levels of diameter irregularities, the specific‐stress/strain and load–elongation curves of the fiber bundle have a stepped or ladder shape. The fiber with the highest irregularity breaks first, even when the thinnest section of the fiber is still coarser than the diameter of a very thin but uniform fiber in the bundle. This study suggests that fiber diameter irregularity along the fiber length is a more important factor than the fiber diameter itself in determining the tensile behavior of a fiber bundle consisting of irregular fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2664–2668, 2004     

基于双天线GNSS/SINS组合的风速测量运动补偿方案设计

以基于浮标平台的动态风速测量为背景,根据运动姿态补偿的原理和实际需要,设计了一套双天线GNSS/SINS组合姿态测量系统,采用卡尔曼滤波实现信息融合,通过在卡尔曼滤波的观测量中引入双天线GNSS输出的航向角信息,解决了惯性系统航向角可观测性较弱的问题,并通过实验验证了系统的有效性。实验结果表明,该运动补偿设计方案能够提高平台姿态测量的精度和稳定性,准确测量平台的姿态信息,并有效降低平台运动对风速测量的影响,风速测量误差低于4%,满足了海洋浮标观测的需求。     

水泥流动性的测量及其在助磨剂助磨效果评价中的应用

介绍了使用粉体物性测试仪测量、计算粉体流动性指数的方法。用化验室统一试验小磨将不同种类、不同掺入量的助磨剂与熟料共同粉磨,检验水泥的流动性指数。结果表明,流动性指数可以区分不同助磨剂相同掺入量和相同助磨剂不同掺入量水泥的流动性,可以作为水泥助磨剂评价与选择的参考。