双子表面活性剂(C12-2-12.2Br-1)表面活性与驱油效率研究

用滴体积法测定了几种双子表面活性剂和对应常规单链表面活性剂的表面张力-浓度曲线,确定了各自的临界胶束浓度,筛选出高效驱油用表面活性剂—C12-2-12. 2Br^-1;并在不同条件下对其进行了室内模拟驱油评价实验。表面张力测试表明,双子表面活性剂—C12-2-12. 2Br^-1的临界胶束浓度仅为547mg/L,对应表面张力为30.72mN/m,较对应单链表面活性剂DTAB具有更优的表面活性。驱油实验表明C12-2-12. 2Br^-1的驱油效率与浓度呈同向变化关系,其浓度为500mg/L即可提高采收率6.45%,其效果明显优于常规单链表面活性剂-DTAB;该剂更适合于中、低渗油藏水驱采收率的提高。     

内蒙古煤系高岭土作为FCC催化剂基质的研究

研究两种内蒙古煤系高岭土（1^＃、2^＃）的化学组成、晶体结构并与苏州高岭土进行了比较。对三种高岭土进行酸改性，利用BET、吡啶-TPD和微反测试分别研究改性前后高岭土的性能特点。并将内蒙古高岭土1^＃与苏州高岭土采用半合成方法合成了FCC催化剂，测定了其裂化活性。研究结果表明，内蒙古1^＃具有较良好的晶体结构和化学组成，经酸改性后比表面积大大增加，具有合适的孔径分布，裂化活性较好，可以取代苏州高岭土作为FCC催化剂的基质。     

Subdivision of work on construction projects

In order to control a project, construction management requires project information. This is obtained through accounting, estimating, cost management and scheduling functions which produce project reports. These reports are best obtained by subdividing the project into small parts. The ways in which each of these functions subdivides a project in order to produce its reports is discussed, together with a means of interrelating this information with a technique known as the work breakdown structure.     

纳米钛酸盐催化合成碳酸二正丁酯

以廉价的偏钛酸为原料,采用水热法和乙醇热法制备了纳米钛酸盐(简称钛酸盐),并对其进行了X射线粉末衍射和X射线光电子能谱表征。考察了钛酸盐的种类、制备方法、晶型对催化碳酸二甲酯(DMC)与正丁醇酯交换反应的影响。实验结果表明,乙醇热法比水热法制备的钛酸盐粒径小;对于不同的钛酸盐,随钛酸盐碱性的增强,催化活性提高,但由于三价钛的存在,钛酸锂对产物碳酸二正丁酯(DBC)的选择性低于钛酸钡;钛酸钾的催化活性最高,DMC转化率达到65%,DBC选择性达到100%,DBC收率达到65%,并在5次循环使用过程中,催化性能稳定;对于同种钛酸盐,催化活性随粒径的增加而减小;对于钛酸钡,立方相结构的催化活性优于四方相结构。     

Screening of South African Food Plants for Antioxidant Activity

ABSTRACT: In a screening of South African indigenous food plants for antioxidant activity by testing for inhibition of lipid peroxidation, the "potherbs" Amaranthus sp., Sisymbrium thellungii , and Urtica dioica had very high activity. This activity was greatest in the boiled extract of Amaranthus sp. and the boilet and aqueous extracts of Sisymbrium thellungii and Urtica dioica. The activity in the aqueous extract of Nasturtium aquatica was lost by boiling. High activity was also obtained with the teas Galium aparine and Aspalathus linearis (Rooibos) and with the tuber Colocasia esculenta.     

Synthesis and Characterization of Nanosized ZSM-5 Zeolite with Mesoporous Carbon Nanotube as Templates

Preparation of nanocrystalline ZSM-5 has been proven possible with carbon matrix by using confined space synthesis. In combination with the hydrothermal method, by the use of a mesoporous carbon nanotube as the inert support material, ZSM-5 with SiO₂/Al₂O₃ ratios of 100 was successfully synthesized with an average crystal size of 27 nm. Their structures were preliminarily characterized by x-ray power diffraction (XRPD) and infrared spectroscopy (IR), and scanning electron microscopy (SEM), respectively. At the same time, we put forward the mechanism about the confined space synthesis in terms of the results.     

孤岛原油正庚烷和正戊烷沥青质乳化能力研究

从孤岛原油中分离出正戊烷和正庚烷沥青质，元素分析和红外光谱分析结果表明，相对分子质量较大的正庚烷沥青质，含杂原子和极性基团较多。将两种沥青质溶于甲苯配制的模型油，分别与蒸馏水、模拟地层水、0～900mg／LHPAM溶液、0～500mg／L黏土液按1：10体积比充分乳化，测定静置时水相（水包油乳状液）透光率，据以考察沥青质的乳化能力，结果表明：正庚烷沥青质的乳化能力强于正戊烷沥青质；矿化离子使沥青质的乳化能力减弱；随聚合物浓度增大，沥青质乳化能力增强；黏土在浓度小于200mg／L时使乳化能力减弱，浓度大于200mg／L时使乳化能力增强。模型油与HPAM溶液间的界面张力，在聚合物浓度100mg／L时有最小值，在500mg／L时有最大值，正庚烷沥青质模型油的界面张力随聚合物浓度的变化较剧烈。正庚烷模型油在聚合物溶液中的乳化油滴直径分布范围较正戊烷模型油窄，聚合物浓度较大时，油滴直径分布范围较宽。正庚烷沥青质模型油与黏土液闸的界面张力，在黏土液浓度增至300mg／L时略有升高，浓度继续增大时大幅升高，而正戊烷模型油的界面张力在黏土液浓度300mg／L时有最低值。图9表3参7。     

Antioxidative ability of native and thermized sour whey in oxidation‐catalysed model systems†

Antioxidative properties of sour (cottage) were evaluated with (thermized) and without (native) heat treatment (80°C for 30 min). A model system comprising a Tween 20 stabilized peanut oil in phosphate buffer (pH 7.0) emulsion containing lipid oxidation catalysts, FeCl ₃, H₂O₂ and ascorbate was used. Native sour whey powder (SWP) was significantly better than thermized whey in terms of limiting the formation of thiobarbituric acid‐reactive substances and peroxide value. Antioxidative ability was best at pH 3.0 and decreased with increasing pH. SWP (20%, w/v) was significantly better than all commonly used antioxidants tested after 96 h of incubation at 40°C.     

单晶钛酸铋纳米片的XPS和Raman特性

以Bi（NO3）3·5H2O和Ti（OC4H9）4为原料，NaOH为矿化剂，采用水热法制备了形貌规则的单晶Bi4Ti3O12纳米片。X射线衍射（XRD）结果表明，所合成的产物为正交相层状钙钛矿结构的Bi4Ti3O12。场发射扫描电子显微镜（FESEM）研究显示：样品是由大量边缘尺寸接近200nm，厚度约为15nm的片状结构组成。利用X射线光电子能谱（XPS）研究产物的化学组分和价态分布。室温拉曼光谱研究表明，Bi4Ti3O12纳米片的声子寿命和热稳定性低于相应的块体材料。     

La2（MoO4）3：Eu均-花瓣状微／纳米结构的构筑及其荧光性能

在表面活性剂十二烷基硫酸钠（SDS）的作用下，采用温和的水热方法，成功制备了Eu掺杂的花瓣状L丑2（MoO4）3：Eu纳米微结构。这些形貌新颖的微米绒球的直径约3μm，由厚度30nm左右的纳米片次级结构单元自组装构筑而成，分散性良好，形貌规整、大小均一。通过XRD、SEM、TEM测试技术，研究了形貌的形成机理。由于具有良好的结晶度，这些花瓣状La2（MoO4）3：Eu纳米微结构显示出良好的发光性能。