环形锻件钢坯铸钢模上出模斜度的研究与应用

分析了环形锻件终锻成形前的预锻件,即:铸钢坯在浇注成形时使用模具的型腔结构对其铸钢坯的质量有严重影响的主要因素,如对型腔表面出模斜度值的改进提出了新的技术方案。     

消失模工艺在矿车铸件生产中的实践

针对矿车铸件的生产工艺,大胆引进消失模工艺,通过实践及对生产过程的经验总结,为进一步完善提高生产技术和改进措施,扩大消失模工艺在其他产品的应用提出了意见。     

Advances in titanium metal injection molding

The approaches to production of titanium powder injection molded parts are reviewed. Historically, oxygen levels have been too high for structural use (particularly with the Ti-6Al-4V alloy). However, recent advances in starting powders, binders and sintering facilities now allow oxygen levels in the Ti-6Al-4V alloy to be controlled to about 0.2 wt.% oxygen. This should result in significant expansion of the titanium PIM market place into aerospace, automobiles, surgical instruments, dentistry, communication devices (such as computers and cell phones), knives and guns. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 5–6 (455), pp. 118–125, 2007.     

碟形托板拉深冲孔复合模具的设计与应用

通过煤矿用托板加工工艺的分析,确定了冲压工艺流程。设计、试制复合模,通过联动,使传统的分模合二为一,使拉深、冲孔、整形一道工序完成,提高了生产效率,降低了生产成本。     

异型材挤出口模内的流动模拟

本文根据挤出机理，对口模内的流动行为进行适当的简化和假定，建立了挤出口模内流动分析的数学模型，并采用横截面／假想区域法实现了复杂异型材挤出口模内的数值模拟，数值分析结果与三维有限元解和解析解的对比，取得了满意的效果。     

铰接顶梁接头模具的热处理

叙述了热锻模的工作条件及材料分析 ,对铰接顶梁接头模具的热处理工艺作了探讨。     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

苯乙烯与BMI树脂的反应性研究

以ＢＭＩ、二烯丙基双酚Ａ和苯乙烯共聚制得一种低粘度、贮存期长、适用于压铸成型制备复合材料的树脂体系。本文重点研究了树脂的贮存稳定性、反应性及固化树脂的力学性能和耐热性。     

面向Internet的模具知识本体的构建研究

通过对Internet上模具知识特点的分析,提出通过修改模具论坛的发贴模板的方法来获取论坛贴子的标签,然后利用"七步法"构建Internet上模具知识本体,并初步提出语义搜索概念模型,为基于Internet模具知识的搜索引擎的实现提供理论和实践基础。