环氧化天然橡胶改性软质聚氯乙烯的研究

对环氧化度为50％的环氧化天然橡胶（ENR－50）改性软质聚氯乙烯（PVC）体系的性能进行了研究，并用动态力学和电镜分析了PVC与ENR－50的相容性。结果表明：适量的ENR－50可明显改善软质PVC的性能，而且PVC的相对分子质量越大，PVC／ENR－50共混材料的性能越好。虽然DMA测试PVC／ENR－50共混材料只有1个玻璃化转变温度（Tg），但在微观上并不完全相容。     

灰度图像的子块压缩方法

从灰度图像的局部几何特性出发，把图像中像素灰度相近或相同的区域当作一个整体处理，从而达到图像压缩的目的。计算机仿真实验表明，该方法可以获得产高的压缩比和峰值信噪比，有效地消除方块效应，很好地保持目标细节，具有较高的实用价值。     

Development of an Enzymic Time Temperature Integrator for Sterilization Processes Based on Bacillus licheniformis α-amylase at Reduced Water Content

ABSTRACT: The thermal stability of Bacillus licheniformis α-amylase at low moisture content was studied, based on isothermal experiments performed in a temperature range 113 to 125 °C. The thermal inactivation was monitored by measuring the decrease in thermal denaturation enthalpy and/or the decrease in enzymic activity on pnitrophenyl-α-D-maltoheptaoside, or on starch as a substrate. Based on enthalpy readings, an enzymic system with a z-value of 10.4 °C was observed when using a relative humidity of 81% at 4 °C. A theoretical study showed that this system could be used as a Time Temperature Integrator (TTI) to monitor the safety of sterilization processes of numerous food products.     

Monoacylglycerols derived from butter oil by Penicillium roquefortii in suspension cultures

Structural isomers of monoacylglycerols (monoglycerides, MAGs) were identified and compared after degradation of butter oil by two strains of Penicillium roquefortii and a commercial lipase from P roquefortii (EC 3.1.1.3) at pH 7.0 and 10 °C. The conditions were selected as they were comparable with those used in the manufacture of blue mould‐ripened cheese. The commercial lipase was selected to compare with the fungal strains in terms of acyl migration. Results showed that the main isomers formed by lipolysis with the commercial lipase were sn‐2 MAGs (64 mol%), whilst spores and emerging mycelia of P roquefortii produced mainly sn‐1(3) MAGs (83–90 mol%). The work reported here may lead to further assessment of different MAG structural isomers as natural preservatives in foods and dairy products. © 2002 Society of Chemical Industry     

大朝山水电站地下洞室安全监测资料分析

大朝山水电站引水发电系统为地下工程，根据各项安全监测物理量的主要观测成果，对最大观测值分析其对工程的安全影响，为保证其安全运行具有重要意义。为此，分别对大朝山水电站的主要地下建筑物，包括压力引水隧洞、地下厂房、尾水调压室的最大观测值进行了分析研究，并提出了一些建议，有较大的参考价值。     

液化天然气供气站的工艺设计

〗LNG供气站的设计核心是工艺设计，设计中应注意以下几点：正确处理技术先进性与经济合理性的关系，综合权衡设置费与运营费的比例，力求项目全寿命费用最低；大多数城市LNG供气站均利用空气气化LNG，单罐容积为100 m³的真空压力式储罐广泛用于储存量为1200 m³以下的LNG供气站；为正确设置储罐安全阀的开启压力和排放压力，必须根据储罐的最高工作压力按照规范正确确定储罐的设计压力；储罐上2套独立的液位计和高、低限报警自动切断装置可确保储罐安全运行；空温式气化器的气化能力按用气城市高峰小时计算流量的1.3~1.5倍确定，为便于自然化霜应设置2套空温式气化器切换使用；空温式气化器出口串接水浴式加热器可提高冬季或雨天出口天然气温度，保护碳钢管道并降低供销差；LNG储罐区应设置围堰，消防用水量为喷淋与水枪用水量之和。最后建议，必须尽快颁布国家LNG设计规范，以提高我国的LNG设计水平。     

最值求解技巧:巧变四数

在用基本不等式求最值时,大家都熟悉一个口诀:"一正二定三相等",但是有许多学生在怎样保证定值和相等时不知道该如何变形.为了解决学生的困难和困惑,我根据自己的经验,概括为两句口诀:"一正二定三相等,巧变四数定乾坤".     

�Ĵ������Ȼ�����������б�����Դ̽��

本文应用天然气中甲烷、乙烷的碳同位素,甲烷的氢同位素,汞含量及天然气成分等指标,探讨了四川盆地天然气成因分类;并结合地质情况对气源层进行了探讨。     

Numerical modelling of the propagation of fast landslides using the finite element method

This paper proposes a two‐dimensional (2D) model for the analysis of the propagation of fast landslides involving a fluidized material such as debris and mud flows, flowslides and avalanching flows. The model is based on the Navier–Stokes depth‐integrated equations. To incorporate the effect of steep slopes and centrifugal forces due to the high velocities characterizing the flowslides and the bed curvature, a curvilinear system of reference is used. The corresponding equations of motion are complemented by depth‐averaged constitutive equations and bed friction laws. The resulting set of differential equations are solved using the two‐step Taylor–Galerkin algorithm. This algorithm has been used by the authors to solve hydraulic and dam‐break problems using the finite element method. Owing to the importance of the source term compared to the advection component, the proposed algorithm follows a splitting scheme using a fourth‐order Runge–Kutta method for integrating the friction and slope components. The performance of the overall approach has been checked in a number of examples. The analysis of the results provides insights into the key elements of the model and shows the adequacy of the method to solve real problems where merging and splitting of the flow occur. Copyright © 2004 John Wiley & Sons, Ltd.     

A note on the satisfaction of the boundary conditions for Chebyshev collocation methods in rectangular domains

The way boundary conditions are imposed when applying Chebyshev collocation methods to Poisson and biharmonic-type problems in rectangular domains is investigated. It is shown that careful selection of the number of collocation points leads to a linear system ofn linearly independent equations inn unknowns.