Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

MAXIMUM ENTROPY DECONVOLUTION OF XPS PEAK

Necessity of XPS spectrum,deconvolution,disadvantages of the traditional Fast Fourier Tranderm decon-volution method(FFT),princtple,method and advantage ofMaximum Entropy Deconvolution Method (MEM) are de-scribed.Criteria for determing the number of data points sam-pled in MEM are the main point disccussed in the paper,someXPS deconvolution applications of our MEM software showthat the MEM makes XPS deconvolution much easier than thetraditional FFT method.     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.     

基于LVQ网络在轴承座松动故障诊断中的应用

把汽轮机轴承座松动的相关频段上不同频率谱的谱峰能量值作为故障信号的训练样本输入到LVQ网络中去，并由LVQ网络产生训练后不同的权重向量。由于竞争层神经元的权重分布不同，则权重分布图也不同，可根据不同的权重分布图来确认和诊断汽轮机轴承座松动故障的不同程度。     

Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative

In this work, we co‐formulated an oil‐borne copper naphthenate/permethrin wood preservative system with synthetic polymer‐based fire‐retardant additives prior to the impregnation of Pinus radiata sapwood. We evaluated what effect, if any, the preservative had upon the fire performance properties of the fire retardants and whether the fire retardants impacted on the fungicidal and termiticidal efficacy of the preservative. The fire retardants included halogenated and phosphorus‐based systems. A mass loss calorimeter, in conjunction with a thermopile, was used to measure the time to ignition and the peak heat release rate (PHRR) from which the fire performance index (FPI) was determined. The preservative properties were evaluated using termite and soil‐block decay bioassays. In summary, we found that the rate of fire growth was reduced when the fire retardants were used in combination with the wood preservative. We also found that the PHRR was a better determinant of fire performance than the FPI. The performance of the wood preservative was enhanced against fungal decay and termite attack when used in combination with the fire retardants. The fire retardants also demonstrated some wood preservative properties of their own. Copyright © 2008 John Wiley & Sons, Ltd.     

补偿式光纤F—P干涉仪的信号处理系统

本文提出并研制成补偿式光纤F-P干涉仪信号处理系统,提出了用来测量微小位移信号的三种方法及电路,即透射峰时间间隔测量法、光脉冲基波幅度测量法(精密整流法)、鉴相法。测试结果表明:时间间隔测量法,它的最大灵敏度达到0.26纳米/微秒;精密整流法,最大灵敏度为2.38纳米/伏特。     

耦合模模型的峰峰值与有效值

介绍了峰峰值和有效值的偶合模方程,给出了峰峰值P矩阵和有效值P矩阵的表达式。利用峰峰值P矩阵和有效值P矩阵模拟了纵向耦合谐振结构以及阻抗元结构的声表面波滤波器的频响。对比两种P矩阵的模拟结果,说明了峰峰值耦合模方程和有效值耦合模方程分析频响的等效性。     

非晶态PdCuSi的内耗和DSC研究

用葛摆测量了ａ－ＰｄＣｕＳｉ合金的内耗－温度曲线，证明在该合金的Ｔｇ和Ｔｘ温度附近有两个内耗峰Ｐ１和Ｐ２．Ｐ２峰是与非晶晶化有关的内耗峰，而Ｐ１峰可能是弛豫型的内耗峰．分析了倒扭摆和Ｃｏｌｌｅｔｔｅ摆的灵敏度，阐述了这两种摆不适用于测量ａ—ＰｄＣｕＳｉ类合金的内耗峰．     

新疆叶尔羌河中游渠首工程地基处理设计

叶尔羌河洪水动态规律极为复杂,以其极高的起涨速率、异常的高洪峰值闻名于世。中游渠首地基是粘粒极少、极松散的粉细沙层。针对其特点,采用振冲挤密砂石桩、防渗防冲连续墙、抗冲柔性土工布金属网格石笼等综合处理措施进行设计。     

新型高性能脉冲峰值保持电路

本文介绍了两种新型跨导型脉冲峰值保持器，分别用于多丝正比室（ＭＷＰＣ）和复合晶体闪烁探测器（Ｐｈｏｓｗｉｃｈ）输出脉冲信号的形状和幅度分析。电路的跨导放大级采用跨导型集成运算放大器，使电路结构简单化，且性能优良可靠，能响应输入脉冲最小上升时间分别为５０ｎｓ（Ｐｈｏｓｗｉｃｈ）和５００ｎｓ（ＭＷＰＣ）的信号，在４０ｄＢ的动态范围内，两电路的积分非线性均好于０．１％，特别适用于空间γ射线观测。