Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

Complete oxidation of methane at low temperature over Pt and Pd catalysts for the abatement of lean-burn natural gas fuelled vehicles emissions: influence of water and sulphur containing compounds

The catalytic activity of fresh Pd and Pt catalysts supported on γ-alumina in the complete oxidation of CH₄ traces under lean-burn conditions was studied in the presence or the absence of water or H₂S. Steam-aged catalysts were also studied in order to simulate long-term ageing in real lean-burn natural gas fuelled vehicles (NGVs) exhaust conditions. Without water or H₂S added to the feed, Pd catalysts exhibit a superior catalytic activity in methane oxidation compared to Pt ones, whatever the catalysts were fresh or aged. The addition of 10 vol.% water vapour to the feed strongly affects the activity of the fresh Pd catalyst, thus being only slightly more efficient than the fresh Pt one. H₂S has a strong poisoning effect on the catalytic activity of Pd catalysts, while Pt catalysts are more resistant. The fresh H₂S-poisoned Pd/Al₂O₃ catalyst was studied by TPD in O₂/He. Poisoning species decompose above 873 K as SO₂ and O₂ in relative concentrations consistent with the decomposition of surface sulphate species. However, a treatment in O₂/He at temperatures as high as 923 K does not allow the complete regeneration of the catalytic activity of H₂S-poisoned Pd/Al₂O₃. A mechanism involving the poisoning of PdO by sulphate species is proposed. Different diffusion processes by which these sulphate species can migrate back and forth between PdO and the support, depending on the experimental conditions, are suggested.     

腐殖质对重金属离子的吸附作用

采用腐殖质对重金属离子进行了吸附试验。其结果表明 ,腐殖质对重金属离子具有强烈的吸附作用。腐殖质对Cu2 + 、Zn2 + 、Cd2 + 的吸附边界pH值分别为 4 2 ,5 8,7 2 ,吸附率可达 95 %以上 ;对Pb2 + 的吸附作用更加强烈 ,在pH值为 3 5时吸附率就达到 95 %以上 ,并且随着pH值的升高吸附率仍在 95 %以上。腐殖质对 4种重金属离子的吸附能力由强到弱的顺序是Pb2 + >Cu2 + >Zn2 + >Cd2 + 。腐殖质可以用来处理含重金属离子的污水 ,具有过滤快、沉降稳定、效果好的优点 ;也可作为土壤改良剂 ,有效地降低土壤中重金属的含量     

基于面像识别技术的公安网上追逃系统

研究了公安网上追逃系统的体系结构和系统的程序流程，阐述了ASP COM 后台比对服务的3层B／S模式面像网上比对的实现方法，最后给出系统的性能指标和特点。     

用欢喜岭油田低凝稠油生产AH-90重交通道路沥青

针对欢喜岭油田低微稠油的特点，采用常压蒸馏—氧化沥青联合装五的工艺流程，生产出AH-90重交通道路沥青。经测试表明，各项性能均达到我国现行重主通道路沥青技术指标。在高温稳定性、低温抗裂性等方面都优于新加坡壳牌沥青。是一种优质的道路沥青。     

厚度控制技术在中厚板轧制生产中的应用

本文探讨了影响中厚板厚度波动的因素，结合安钢中板厂2800mm轧机按合同轧制一批交货重量不大于理论重量船板的生产实践，总结了实际生产中实现高精度厚度控制的有效方法。     

Rheology in Processing of in Situ Composites of Polypropylene and Low Melting Poing Metals

The low melting point metallic tin powder or alloy of tin and lead was blended with polypropy-lene. A kind of in situ composite has been prepared. The variations of torque were studied when the composites were mixed in Haake torque rheogeniometer. By way of capillary extrusion, effects upon rheology of the in situ com-posites of the low melting point metals (LMPM) and coupling agent for their different variety and content, were investigated. From flow curves, the results indicate that in situ composites mixed with the LMPM are a kind of pseudoplastic fluid. If the LMPM were melted, the higher the content of the LMPM , the lower apparent viscosity of composites. Meanwhile, when the coupling agent is added into composites, the viscosity of composite will go up first and drop then. This shows that the LMPM have a promoter flow action on the polypropylene.     

免振捣自密实混凝土技术在多层住宅中的应用

介绍了免振捣自密实混凝土的特点和质量控制措施，结合某小区自密实混凝土工程应用实例，阐述了该项施工技术，其经济和社会效益良好，提出了进一步发展该技术的若干设想。