The effects of soaking of whole, dehulled and ground millet and soybean seeds on phytate degradation and Phy/Fe and Phy/Zn molar ratios

The degradation and leaching of phytates, phytase activity and iron and zinc concentrations have been studied after soaking of whole seeds, dehulled seeds and flours of millet and soybean, in order to investigate the efficiency of soaking on reducing Phy/Fe and Phy/Zn molar ratios. When using millet grains, dehulling and milling before soaking facilitated the leaching of phytates and phytases in the aqueous medium and hence phytate degradation. Dehulling of soybean seeds led to a marked increase in phytate content, whereas milling favoured reactions between phytases and phytates. The Phy/Fe and Phy/Zn molar ratios decreased only slightly during soaking. The highest decreases for millet were obtained after soaking of flour for 8 h (Phy/Fe: 10.8–7.7 and Phy/Zn: 20.3–15.1), and after soaking of whole seeds for 24 h for soybean (Phy/Fe: 10.4–9.4 and Phy/Zn: 23.8–19.1). Cooking of flours with water used for soaking did not increase phytate degradation.     

干磨干选工艺在赤城选矿厂中的应用

赤城鑫宇选矿厂工艺流程设计中采用了干磨干选的新工艺，用来处理全铁品位为13％左右的原矿。该工艺中将原矿用干式棒磨机磨至4mm～0mm，然后进行干式磁选甩尾，甩尾产率达到36％，甩尾后原矿TFe位可达到18％，提高了入湿磨、选别的品位，有效地降低了下段磨矿的费用。该工艺投入运行后，生产情况良好。     

攀枝花矿产资源特征及循环经济发展策略探讨

文章着重描述了攀枝花矿产资源特征、资源矿物流向和资源产品定位，分析了资源矿物使用行业的不同特点，明确了针对攀枝花矿产资源利用的循环经济目标，根据资源循环利用技术水平和资源循环开发现状，提出了攀枝花矿的循环经济发展策略.     

Numerical Simulation of Independent Advance of Ore Breaking in the Non-pillar Sublevel Caving Method

The mechanism of stress generation and propagation by detonation loading in five separate independent advance of ore breaking patterns is discussed in the paper. An elastic numerical model was developed using AN- SYS/LS-DYNA 3D Nonlinear Dynamic Finite Element Software. In this package ANSYS is the preprocessor and LS-DYNA is the postprocessor. Numerical models in the paper to actual were l：10 and the element mesh was dissected in scanning mode utilizing the symmetry characteristics of the numerical model. Five different advance rates were studied. Parameters, such as the time required to maximum stress, the action time of the available stress, the maximum velocity of the nodes, the stress penetration time, the magnitude of the stress peak and the time duration for high stress were numerically simulated. The 2.2 m advance appeared optimum from an analysis of the simulation results. The results from numerical simulation have been validated by tests with physical models.     

新城金矿采场落矿控制爆破技术

新城金矿为蚀变岩型金矿床,由于受地质构造影响,顶板稳定性较差,局部和较大面积的顶板冒落现象时有发生,为了解决采场顶板安全问题和提高落矿主要技术经济指标而进行了“上向水平分层尾砂胶结充填法采场控制爆破技术”的试验研究工作,试验达到了预期效果。     

难选氧化锰矿的选别工艺特征

氧化锰矿的泥化现象一般较严重，有的矿石很容易在机械作用下碎裂泥化，并且锰在粗、细粒级中的含量差别较大，因此在选别过程中避免过碎、强搅拌、强擦洗，并利用合理的分级工序，往往能获得十分理想的选别指标。     

上向分层尾砂充填法在仓上金矿的新应用

本文介绍了垂直矿体走向布置的上向分层尾砂充填采矿法新方案的特点及其在仓上金矿中厚矿体的具体应用。     

镇沅金精矿选择性固砷焙烧—氰化浸出新工艺研究

对云南镇沅金矿的难当金精矿进行了选择性固砷焙烧－氰化浸出的试验研究，取得了满意结果。砷固定率大于９２％，硫挥发率为７８％－８４％，金浸出率可达９１％－９３％。选择性固砷焙烧－氰化浸出新工艺可有效消除砷害，综合利用有价成分硫，特别适宜于含砷高硫，同时含碳等杂质的细粒浸染型难浸金矿石的处理，在我国有较大的发展前景。     

含碳酸盐萤石矿石全弱酸性浮选新工艺

对含碳酸盐较高的萤石矿石提出了不加纯碱的全弱酸性浮选新工艺,获得CaF_298.21％、SiO_20.67％,回收率为93.25％的良好指标,实现了低模数碳酸盐—萤石矿石的高纯分离。