HL-1M装置的真空运行与质谱诊断

通过对 HL- 1M装置真空运行模式、真空运行参数、氦辉光放电清洗和硅化壁处理手段等的规范化 ,显著地改善了装置的真空壁出气、本底杂质浓度、托卡马克放电杂质出气比和再循环 ,成功地实现了高参数放电、长脉冲放电和装置暴露大气后快速恢复放电 ,并成功地为演证低混杂电流驱动、离子回旋共振加热、电子回旋共振加热、中性束注入、弹丸注入和分子束注入实验和升级等离子体运行等提供了良好的真空壁条件。描述了 HL- 1M装置真空系统、壁出气和再循环控制、质谱诊断和程序脉冲送气等方面的主要实验成果 ,并为 HL- 2 A装置的真空系统研制和运行提供了有益的参考     

Ti,N,Mg对M2高速钢凝固组织和硬度的影响

为了改善Ｍ２高速钢共晶碳化物的分布，本文利用小凝固试样变质的方法研究了Ｔｉ，Ｎ和Ｍｇ对Ｍ２高速钢凝固组织和硬度的影响。试验结果表明，加入Ｔｉ或Ｔｉ－Ｎ后，共晶碳化物形态和分布有很大改善，而加入Ｔｉ－Ｎ后对凝固组织有轻微的细化作用，但只添加Ｔｉ不补碳时，钢的淬火硬度和回火硬度均下降；加入适量的Ｍｇ可以使片状的Ｍ２Ｃ型共晶碳化物转为鱼骨状的Ｍ６Ｃ型共晶碳化物，使其分布有所改善，Ｔｉ和Ｍｇ复合加入可以明     

Influence of Missing Values on the Prediction of a Stationary Time Series

Abstract. The influence of missing observations on the linear prediction of a stationary time series is investigated. Simple bounds for the prediction error variance and asymptotic behaviours for short and long‐memory processes respectively are presented.     

应用M68HC908LJ12设计单相复费率电能表

介绍了以Motorola公司的M68HC908LJ12高性能单片机为CPU的单相复费率电能表的硬、软件设计和抗干扰设计。     

The development of a stress analysis code for nuclear graphite components in gas-cooled reactors

Most of the UK nuclear power reactors are gas-cooled and graphite moderated. As well as acting as a moderator the graphite also acts as a structural component providing channels for the coolant gas and control rods. For this reason the structural integrity assessments of nuclear graphite components is an essential element of reactor design. In order to perform graphite component stress analysis, the definition of the constitutive equation relating stress and strain for irradiated graphite is required. Apart from the usual elastic and thermal strains, irradiated graphite components are subject to additional strains due to fast neutron irradiation and radiolytic oxidation. In this paper a material model for nuclear graphite is presented along with an example of a stress analysis of a nuclear graphite moderator brick subject to both fast neutron irradiation and radiolytic oxidation.     

Formation of steady state size distribution of precipitates in alloys under cascade-producing irradiation

The effect of coherency loss on the development of precipitate size distribution under cascade-producing irradiation is considered. The nucleation of coherent precipitates, their growth followed by coherency loss and cascade-induced dissolution of large incoherent precipitates can occur simultaneously resulting in formation of a quasi-stationary size distribution of semicoherent precipitates. To describe this process we consider co-evolution of a mixed population of coherent, semicoherent and incoherent precipitates. Mathematically, the problem is formulated as a set of discrete rate equations of nucleation kinetics (the Master equation approach) which is also used for later stages of evolution. To solve the corresponding large set of equations (typically, more than 10⁵ equations) an efficient numerical method is developed. The simulation results obtained for material parameters and irradiation conditions typical for nuclear reactors show that the coherency loss affects considerably evolution of the precipitate population. Under certain irradiation conditions, both in solution-annealed alloys and in aged ones, the mean precipitate size and the number density during prolonged irradiation tend to steady state values, whereas the size distribution function of large precipitates narrows. The width of the quasi-stationary size distribution is controlled by cascade parameters. It was found that the asymptotic quasi-stationary state of the precipitate population may depend on initial state of the alloy.     

M8011H16铝合金防盗盖板生产工艺研究

研究了元素含量变化对8011铝合金防盗盖板综合性能的影响，在8011合金中改变Cu、Mn元素含量后可提高防盗盖板的强度，同时研究了烘烤处理后的强度变化问题。本文研究出了8011铝合金防盗盖板新的生产工艺制度。     

A Hermitian Box-scheme for One-dimensional Elliptic Equations – Application to Problems with High Contrasts in the Ellipticity

We introduce a new box-scheme, called ``hermitian box-scheme' on the model of the one-dimensional Poisson problem. The scheme combines features of the box-scheme of Keller, [20], [13], with the hermitian approximation of the gradient on a compact stencil, which is characteristic of compact schemes, [9], [21]. The resulting scheme is proved to be 4th order accurate for the primitive unknown u and its gradient p. The proved convergence rate is 1.5 for (u,p) in the discrete L ² norm. The connection with a non standard mixed finite element method is given. Finally, numerical results are displayed on pertinent 1-D elliptic problems with high contrasts in the ellipticity, showing in practice convergence rates ranging from 1 to 2.5 in the discrete H ¹ norm. This work has been performed with the support of the GDR MOMAS, (ANDRA, CEA, EDF, BRGM and CNRS): Modélisation pour le stockage des déchets radioactifs. The author thanks especially A. Bourgeat for his encouragements and his interest in this work.     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

IGBT驱动模块M57962AL的应用研究

IGBT专用驱动模块M57962AL适于驱动大功率器件，可根据其内部的自保护功能对其应用电路进行安全可靠设计。该模块采用双电源驱动，有过流过压检测电路和保证IGBT可靠通断电路。总之，能够安全地驱动开关、变频器中的大功率IGBT。