A study of the influence of grain boundaries on short crack growth during varying load using a dislocation technique

The propagation of short cracks in the neighbourhood of grain boundaries have been investigated using a technique were the crack is modelled by distributed dislocation dipoles and the plastic deformation is represented by discrete dislocations. Discrete dislocations are emitted from the crack tip as the crack grows. Dislocations can also nucleate at the grain boundaries. The influence on crack growth characteristics of the distance between the initial crack tip and the grain boundary has been studied. It was found that crack growth rate is strongly correlated to the dislocation pile-ups at the grain boundaries.     

Electrically conducting nylon 6,6–polyaniline short composite fibres synthesised by the solvent coagulation method

Polyaniline (PANI) was blended with nylon 6,6 in concentrated H₂SO₄ and HCl solutions. The solvent coagulation method was utilised to extract short composite fibres of a centimetre in length. A solution of n-butyl acetate, acetone, toluene, 1 μM HCl and chloroform were used as coagulating bath to extract the fibres. The diameters of the fibres ranged from 200 to 300 nm, while the length measured approximately 1 cm, as determined from Scanning Electron Microscopy (SEM). The electrical conductivity varied from 10⁻⁴ to 10⁻² S/cm for different mass fractions of PANI (x_PANI) in the composite fibres. The percolation threshold was reached at x_PANI values between 0.15 and 0.2, and further addition of PANI resulted in saturation of the conductivity of the composite fibre. To observe the effect of MWCNTs on the electrical conductivity of the nylon–PANI fibres, 0.04 g, 0.08 g, 0.4 g and 0.5 g of MWCNTs (1, 2, 10, 12.5 weight percentage, respectively) were added into the nylon–PANI solution and were extracted as fibres in the aforementioned solvents. The electrical conductivity of the short fibres increased by an order of magnitude (0.372 S/cm at 12.5 wt.%) when they were extracted in the presence of the MWCNTs. PANI doped in concentrated HCl exhibited an electrical conductivity of 4.46 S/cm.     

棒材短应力轧机快速精准维修法

主要介绍了棒材短应力轧机的快速精准维修方法，阐述了该标准维修工序的形成、应用以及在标准工序过程中自主创新的先进工具，多项工具已申报实用性技术专利，该方法可提高产品质量，希望对类似工程有参考价值。     

针织物节能减排漂染工艺探讨

将新开发的高效前处理、染色助剂应用于针织物实用高效漂染工艺,探讨其应用工艺、产品质量及节能减排效果。分析各类前处理碱氧一浴工艺的特点、应用特性及节能减排效果;阐述涤棉针织物练染一浴工艺,免还原清洗工艺,棉针织物活性染色与抛光一浴工艺及活性染色后皂洗酶后处理工艺。并与相应的传统工艺对比其工艺曲线、质量水平、节能减排效果及污染物浓度降低情况。客观评价各类工艺的优缺点,建议生产厂家根据产品质量要求,选用相应高效助剂,并结合实际生产设备优化工艺后使用,节能减排效果将更加显著。     

Growth of very long “short cracks” initiated at holes

The initiation and growth behavior of very long microstructurally short fatigue cracks formed at circular holes is described. Very long here means cracks which are several millimeters or even centimeters long. Microstructurally short refer to the fact that these cracks, in spite of their physical length, are still smaller than the grain size of the material and thus exhibit the characteristic features of such cracks. Growth retardation or even halt at grain boundaries and fluctuating crack growth rates can readily be observed with the naked eye by employing a experimental technique which allows one to increase the grain size of Al1050 Aluminum alloy until the centimeter scale by applying a series of mechanical and heat treatments. Once the thermo-mechanical treatment is completed and the desired grain size obtained, a circular notch is machined on each specimen, and the samples are subjected to fatigue loading. With this method, interactions between cracks and microstructural barriers can be studied with an unprecedented level of ease and detail. An interesting observation is that the location of the crack initiation point along the hole contour varies greatly with the ratio between the hole diameter and the grain size: for large ratios, the initiation point is located close to the point corresponding to the maximum circumferential stress (the horizontal symmetry axis in our case), but for smaller ratios, however, the point of crack initiation moves markedly away from the symmetry axis.     

Systematic study of short circuit activation on the performance of PEM fuel cell

During the operation of proton exchange membrane fuel cell (PEMFC), it always suffers from reversible performance loss caused by the oxidation of platinum catalyst on its electrode, which reduces the electrochemical active surface area. Short circuit method has been found to improve the performance of fuel cells by stripping of oxides and other adsorbed species from platinum, which needs systematical understanding the effective parameters of short circuit method on fuel cell performance. In this paper, the effects of different short circuit activation parameters (duration, interval, cycles, cut-off voltage, operating current) are carefully studied and analyzed during short circuit operations. In addition, the mechanism revealing how relevant parameters influence short circuit activations is deeply analyzed. The results show that five groups of activation parameters have obvious influence on the activation of fuel cell, indicating that the short-circuit activation effect can be optimized. Among these parameters, the short-circuit duration parameter have the greatest impact on activation, because the platinum hydroxides and oxides is gradually removed during short-circuit duration and results in a larger effective surface area of the platinum catalyst for the electrochemical reaction. However, the smallest impact is short-circuit interval. Another finding is that the five activation parameters are not independent, so the optimal activation parameter value needs to be analyzed in combination with the operating conditions. Finally, according to the activation principle, selection of appropriate short circuit activation parameters for application are proposed to further improve performance and fuel utilization by considering the safety of the stack.     

提高晶闸管di/dt能力的研究

从di/dt损坏机制、定量公式入手,分析了国内外有关di/dt的著作、文章,研究了提高晶闸管器件di/dt能力的各种有效方法,给出了一个常规新设计及其研究成果。     

Determination of biomass accumulation in mixed belts of Salix,Corylus and Alnus species in combined food and energy production system

Given the energetic, demographic and the climatic challenges faced today, we designed a combined food and energy (CFE) production system integrating food, fodder and mixed belts of Salix, Alnus and Corylus sp. as bioenergy belts. The objective was to assess the shoot dry weight-stem diameter allometric relationship based on stem diameter at 10 (SD₁₀) and 55 cm (SD₅₅) from the shoot base in the mixed bioenergy belts. Allometric relations based on SD₁₀ and SD₅₅ explained 90–96% and 90–98% of the variation in shoot dry weights respectively with no differences between the destructive and the non-destructive methods. The individual stool yields varied widely among the species and within willow species with biomass yield range of 37.60–92.00 oven dry tons (ODT) ha⁻¹ in 4-year growth cycle. The biomass yield of the bioenergy belt, predicted by allometric relations was 48.84 ODT ha⁻¹ in 4-year growth cycle corresponding to 12.21 ODT ha⁻¹ year⁻¹. The relatively high biomass yield is attributed to the border effects and the ‘fertilizing effect’ of alder due to nitrogen fixation, benefitting other SWRC components. On termination of 4-year growth cycle, the bioenergy belts were harvested and the biomass yield recorded was 12.54 ODT ha⁻¹ year⁻¹, in close proximity to the biomass yield predicted by the allometric equations, lending confidence and robustness of the model for biomass yield determination in such integrated agro-ecosystem.     

Failure of structural (RC,masonry, bridge) to Van earthquake

An earthquake occurred on 23 October 2011, at approximately 20 km north of city of Van downtown, west of Ercek Lake, in the vicinity of Kasimoglu Village with a moment magnitude of M_w = 7.2. While aftershock activities of this earthquake continues intensively, another earthquake with local magnitude M_w = 5.6 occurred, on 9 November 2011, at approximately 10 km south of Van downtown, in county of Edremit region. By this second earthquake, property damage and life loss count significantly increased. In this paper, failures of damaged structures at Van earthquake are examined. Also negative effects of structural irregularities (short column, soft story, torsion), structural material (concrete, steel), soil properties (liquefaction, sliding), structural systems (reinforced concrete, prefabricated, masonry and adobe) and structure type (bridge, culvert, minaret) are studied.     

一起风电场变压器短路故障的诊断与分析

分析了一起风电变压器低压多股并绕导线间的短路故障案例,采用多种试验方法并结合测量数据分析,推断出了故障部位,详细的介绍了分析过程和检查情况,并提出预防措施。