MINERALOGICAL, PORE AND PETROPHYSICAL CHARACTERISTICS OF THE DEVONIAN JAUF SANDSTONE RESERVOIR, HAWIYAH FIELD, EASTERN SAUDI ARABIA

Throughout the subsurface of the Arabian Peninsula, the approximately 460ft thick, Devonian Jauf Formation generally consists of well-compacted, low-porosity sandstones and shales, but it also includes friable and highly porous sandstones which form significant gas and condensate reservoir intervals. The mineralogy and pore properties of these reservoir intervals at the Hawiyah field (part of the giant Ghawar structure) were studied by integrating petrographic data with petrophysical measurements of reservoir sandstone samples.
The reservoir sandstones are mainly composed of quartz arenites containing small amounts of altered potassium feldspar grains, authigenic illite and chlorite. Based on the pore types, which reflect the habits of the intergranular clays, three reservoir sandstone types have been defined: Type A, characterized by macroporosity; Type B, with microporosity; and Type C, with combined laminations of Types A and B. The dominance of pore-lining clay (as in Type A) or pore-filling clay (as in Type B) is the principal factor controlling the petrophysical properties of the samples. Types A and C sandstones contain macro pores, but irreducible water saturation is high (25 to 45%) compared to clean samples elsewhere, because of the presence of micropores associated with clay. In Type B sandstones the irreducible water saturation is commonly greater than 40% because all the pores spaces are in the microporosity range. The irreducible water saturation in Type B sandstones increases rapidly as porosity decreases. When porosity is less than 10%, the corresponding permeability is 0.2 mD, but no economic production can be expected because water saturation is as high as 100%. In the producing intervals, authigenic clays result in low electrical resistivity due to high water saturation; however, water-free gas is produced.     

AlSb晶体内二维磁极化子的磁场与温度效应

在考虑声子之间相互作用的同时，本文应用线性组合算符和微扰法研究了电子自旋对弱耦合二维磁极化子特性的影响。对AlSb晶体所作的数值计算结果表明，随着磁场的加强，磁极化子平均数减少；随着温度的增加，磁极化子平均数也增加；随着温度的增加，电子自旋作用以及声子之间相互作用都加强；随着磁场的加强，电子自旋作用增加而声子之间相互作用基本不变。     

用CPLD实现SRAM工艺FPGA的安全应用

提出了一种利用CPLD产生的伪随机码来加密SRAM工艺FPGA的方法,并详细介绍了具体的电路和VHDL代码。     

半导体传感器在生物分析科学中的应用(英文)

回顾了半导体生化传感器 (ISFET 和 LA PS)在医学监测、免疫检测、免疫分析、D N A 杂交以及细胞培养等方面应用的进展。为使半导体器件适用于生化检测,对其中所采用的检测手段和取得的研究结果进行了分析。展望了通过与微流体网络相结合,基于半导体传感器的实验室芯片化的可行性。     

大牛地气田异常修正等时试井资料求取产能方法

大牛地气田为低渗-致密气田,因存在启动压力梯度等因素,修正等时试井曲线按常规方法处理出现异常,无法准确获取气井的产能方程.采用LIT法和异常曲线校正法对气田异常试井资料进行了重新处理,最终获得气井产能方程,为同类气藏产能试井可能出现的异常资料处理解释探索了新的途径.     

The effect of ionic cross-links on the deformation behavior of homoblends made of poly(styrene-co-styrenesulfonic acid) and poly(styrene-co-4-vinylpyridine)

Deformation behavior of stoichiometric blends made from poly(styrene-co-styrenesulfonic acid) (SPS) and poly(styrene-co-4-vinylpyridine) (SVP) was investigated by TEM observation of strained thin films. An FTIR investigation revealed that ionic cross-links were formed between the component polymers upon blending due to intermolecular ion-ion interactions, which arose from proton transfer from sulfonic acid groups to pyridine groups. TEM observations indicate that the deformation mode of the blends changed from crazing only to crazing plus shear deformation, with the shear contribution becoming larger, as the ion content in the blends increased. Such changes in deformation mode can be understood as arising from an increase in the ‘effective’ strand density due to the formation of ionic cross-links upon blending. It was also found that the ionic cross-links via pyridinium cation/sulfonate anion ion pairs were more effective in inducing the transition of deformation mode than ionic cross-links via -SO₃⁻/Na⁺ or -SO₃⁻/Ca²⁺ ion pairs.     

大牛地气田气井无阻流量的确定方法研究

大牛地气田气井试井大多采用一点法，由于气层渗透性差，测试时间短，流压很难达到稳定，计算的无阻流量往往偏高，且无法获得正确的产能方程。通过气田多口井修正等时试井数据进行统计分析，获得了一点法试井在不同生产时间下计算无阻流量的经验公式；利用气田修正等时试井的二项式方程系数曰，计算惯性阻力系数并经过曲线回归处理获得了经验关系式，很好地解决了一点法试井计算产能方程的问题。     

分层注水井智能测试调配技术试验评价

注水井智能测试调配技术在不改变原注水管柱的基础上，利用井下可调式堵塞器，通过地面电脑控制，实现了测试调配同步进行。通过7口井的现场试验及分析评价，表明该工艺具有测调精度高、测调时间短、测试资料准确等特点。     

FCC装置主风分布管喷嘴磨损的气相流场分析

用FLUENT流体计算软件对FCC装置再生器树枝状分布管喷嘴流场进行了计算,分析了喷嘴发生磨损的机理.对喷嘴流场的计算表明喷嘴磨损是催化剂颗粒造成的,属于气固两相流冲蚀磨损.由于某些喷嘴的压力降偏低和流场存在偏流,造成催化剂颗粒倒流至喷嘴内部或分布支管内部.催化剂颗粒流经喷嘴时,斜向冲击内壁产生冲蚀磨损.磨损首先发生在喷嘴内壁局部区域,形成圆弧状磨损痕迹,再将喷嘴磨穿,逐渐扩大为整个喷嘴,磨掉喷嘴.这些分析结果可为主风分布管的设计提供帮助.     

番禺30-1砂岩强水驱气藏储层非均质性研究

针对垂向非均质性严重且边底水能量强的番禺30-1气田面临的潜在开发问题，通过岩心分析及测井二次解释，对其夹层特征及储层非均质性等进行了研究，划分出19个流动单元并定量描述了各流动单元的特征参数，建立了该气田的精细地质模型。综合评价表明，新建的地质模型具有较高的精度，为该气藏合理开发提供了坚实的地质基础。