库车坳陷煤生物标志物组成随成熟度的变化特征

对塔里木盆地库车坳陷三叠系和侏罗系的11个岩心与露头煤样的地球化学分析表明，煤的生物标志物组成随演化程度的增加而有规律的变化：成熟早期（镜质组反射率Ro／1．0％）煤的生物标志物组成反映了沉积环境和生源的特征；成熟晚期（1．10％＜Ro＜1．30％）煤的生物标志物特征受成熟度的控制作用十分明显，生物标志物参数随Ro的增大而增加或减小；高－过成熟阶段（Ro＞1．30％)所有煤样的生物标志物组成已基本趋于一致，而且和湖相泥岩的生物标志物特征相似，该阶段的生物标志物参数不能用来进行油源对比。     

Large-scale cooling towers as part of an efficient and cleaner energy generating technology

The present paper will outline the main aspects of the design and construction of cooling towers in Germany in the last decade. As part of electricity generating power plants, cooling towers play a significant role for the availability of reliable energy supplies, in a manner compatible with environmental requirements. They definitely belong to the largest and thinnest concrete structures at present. Because of the combined action of wind, thermal and moisture effects, special care has to be taken with regard to fatigue, cracking and corrosion to ensure an adequate level of safety and durability. Such a design strategy has been employed for the world’s tallest cooling tower at the Niederaussem power plant in Germany, with an overall height of 200 m and thickness values of 22–24 cm. Special considerations included the realistic non-axisymmetric distribution of soil characteristics, wind action due to interference effects (as determined by wind-tunnel tests), optimisation of the shell shape to improve structural and dynamic behaviour, injection of the cleaned flue-gas into the cooling tower, and the use of high-performance concrete (85 MPa) to improve shell resistance against acid attack by the cleaned flue-gas. The paper will present some results of an actual research project on this problem, which was conducted at the University of Wuppertal, to explore the use of high-performance concrete on design, stability and durability of cooling tower shells.     

煤矸石高路堤下多孔拱涵顶进

介绍了国内首例煤矸石高路堤下顶进工程的施工     

水平浓缩燃烧器在65t/h煤粉炉上的应用

介绍65t/h煤粉炉的基本概况和存在的问题，详细阐述了采用水平浓缩煤粉燃烧技术对原燃烧器的改造过程，对改造前后运行参数及经济效益进行了对比。     

机电一体化技术在综合采煤设备中的应用与发展

介绍了机电一体化技术在国内外煤矿井下综采设备中的应用，并论述了机电一体化技术发展与相关技术的研究。     

非晶软磁合金的巨磁阻抗效应及应用

近来在ＦｅＣｏＳｉＢ等Ｃｏ基非晶体丝带中现了巨磁阻抗效应，由于在一小的直流纵向偏置场下该效应能使丝带两端的交流电压发生大而灵敏的变化，因而在磁记录头和传顺技术中具有巨大的应用科学潜能，受到各国学者的关注，本文简单介绍了巨磁阻抗效应的来源，并综述了近年来非晶体软磁合金材料的的巨磁阻抗效应及应用的研究进展，文章最后说明了尚待深入解决的问题。     

软土中的基坑支护工程实例分析

武汉某地下车库基坑处于深厚淤泥中 ,采用排桩 +土层锚杆支护与放坡 +网喷分段支护方式 ,本文根据现场地质、地形条件 ,对本工程支护过程中支护桩与土体变形作了具体分析。     

Relationship Between Coal Powder and Its Combustibility

Coal‘s volatile component ,ash and fixed carbon content have different function in different stages of a combustion process,but the traditional coal classification can precisely show its combustion property.In this experiment coal‘s evaluation indeves(ignition index Di),(burn off index Df) were used to qualitatively show the ignition property and combustion ending property of coal samples.Meanwhile,considering actual heating circumstances in calciner(in cement plants),this thesis established the relationship among the ignition index,burn off index and coal‘s industrial analysis value,which makes it possible for the user to predict the quality of coal before using it and is very valuable in practice.     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。     

Split and collectorless flotation to medium coking coal fines for multi-product zero waste concept

The medium coking coal fines of − 0.5 mm from Jharia coal field were taken for this investigation. The release analysis of the composite coal reveals that yield is very low at 10.0% ash, about 25% at 14% ash and 50% at 17% ash level. The low yield is caused by the presence of high ash finer fraction. The size-wise ash analysis of − 0.5 mm coal indicated that − 0.5 + 0.15 mm fraction contains less ash than − 0.15 mm fraction. Thus, the composite feed was split into − 0.5 + 0.15 mm and − 0.15 mm fractions and subjected to flotation separately. The low ash bearing fraction (− 0.5 + 0.15 mm) was subjected to two stages collectorless flotation to achieve the concentrate with 10% ash. The cleaner concentrate (18.9%) with 10% ash was recovered which has an application in metallurgical industries. The concentrate of 30.2% yield with 12.5% ash could be achieved in one stage collectorless flotation which is suitable for use in coke making as sweetener. As the − 0.15 mm fraction contains relatively high ash, collector aided flotation using sodium silicate was performed to get a concentrate of 23.6% yield with about 17% ash. The blending of this product with cleaner tail obtained from − 0.5 + 0.15 mm produces about 35.0% yield with 17% ash and that can be utilized for coke making. The reject from the two fractions can be used for conventional thermal power plant or cement industries using a 23.5% ash after one stage collector aided flotation and the final tailings produced content ash of 61.6% can be used for fluidization combustion bed (FBC). This eventually leads to complete utilization of coal.