电离层时域探测方法

给出了各向同性分层半空间等离子体对时域电磁脉冲后向散射的有关公式，得出了反抛物层时域响应的解析表达式，并利用时频分析方法演出了电子密度分布。     

暴雨洪水流域系统随机模拟(研究之三)

本文提出的移置特大暴雨的不连序序列的随机插补方法,以及利用W—H逆变换法将偏态暴雨序列转为正态序列和随机扣除模拟的暴雨过程损失量等方法,基本是可行的,对提高模型的代表性、稳定性和实用性有重要作用。     

任意曲线透视投影的逆变换

透视曲线的逆变换是透视图象三维逆变换的重要基础。本文在给出透视投影逆变换基本方程的基础上，分别提出了圆、椭圆、二次曲线、任意平面曲线的透视投影逆变换的解析方法或计算机反求方法。同时给出灭点信息不足明图象的透视参数的准确反求方法。     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

叠前地震数据的规则化

本文通过对动校正前积分法DMO原理的探讨，在借鉴Canning(1996)提出的利用DMO实现三维数据规则化的方法和Biondi(1998)提出的三维叠前地震数据方位角校正方法的基础上，从方位角校正的角度入手，利用DMO和DMO^-1相结合的处理流程对地震数据进行规则化，以得到新的规则的观测系统下具有所需特定方位角的观测数据。此方法可用于解决叠前地震数据道插值、陆上地震勘探中不规则观测数据的规则化和海上地震勘探中的羽状现象校正等问题，可将已有地震观测数据转变为特定观测系统的叠前地震数据，以便于某些处理方法的应用。此方法原理简单并具有广泛的适用性。     

新型阳离子聚丙烯酰胺微粒的研究 Ⅱ.含PEO支链阳离子聚丙烯酰胺微粒的絮凝性能

以丙烯酰胺、丙烯酰氧基乙基三甲基氯化铵、聚氧乙烯大单体和N ,N’ -亚甲基双丙烯酰胺为单体 ,进行四元反相微乳液共聚合 ,制备出新型含PEO支链的阳离子微粒絮凝剂。然后用该微粒絮凝剂分别对针叶木纸浆和特种纸白水进行了助留和絮凝性能的研究 ,结果表明 ,本新型微粒具有能单独使用、絮凝效果好和抗剪切性强等优点。     

反偏移法三维波动方程正演

三维地震资料的处理与解释往往都需要三维正演模型给予验证，以得到准确的处理、解释结果。本文提出的三维正演方法是一种偏移算法的逆运算方法－有限差分反偏移法。这一算法具有算法简单、运算量小及深度方向分辨率高的特点，是一种快速、高精度的正演算法。反偏移法虽是偏移算法的逆运算法，却出现常规偏移算法中所没有的很多问题。为此，本文进行了三种不同反偏移方法试验，并采用了一种新的浮动坐标变换，使正演结果精度得到很大     

GENERALIZED INVERSE GROUP OF SIGNAL AND ITS IMPLEMENTATION WITH NEURAL NETWORKS

A new concept, the generalized inverse group (GIG) of signal, is firstly proposed and its properties, leaking coefficients and implementation with neural networks are presented. Theoretical analysis and computational simulation have shown that (1) there is a group of finite length of generalized inverse signals for any given finite signal, which forms the GIG; (2) each inverse group has different leaking coefficients, thus different abnormal states; (3) each GIG can be implemented by a grouped and improved single-layer perceptron which appears with fast convergence. When used in deconvolution, the proposed GIG can form a new parallel finite length of filtering deconvolution method. On off-line processing, the computational time is reduced to O(N) from O(N2). And the less the leaking coefficient is, the more reliable the deconvolution will be.