施磷方式对蓖麻生长和铅积累的影响

采用盆栽实验研究了土壤重金属铅污染下（1 000mg·kg-1）,磷肥根施和根施配合叶面喷施两种方式对能源作物蓖麻生长和铅积累特征的影响。结果表明,根施磷肥对蓖麻形态和生物量影响很小,而根施配合叶面喷施显著地提高了蓖麻总生物量。根施磷肥降低了蓖麻地下部对铅的富集,根施配合叶面喷施则大幅度提高了蓖麻叶片对铅的积累量,从而提高了蓖麻地上部的铅积累量,两者与对照相比分别提高了90.01%和79.40%。磷肥根施配合叶面喷施对蓖麻铅富集系数影响很小,但大大提高了转运系数,达0.549,是对照的1.91倍。因此,适当的磷肥根施配合叶面喷施可以有效提高蓖麻铅从根系到地上部的转移能力,从而提高蓖麻对土壤铅的萃取能力和修复效果。     

Risk reduction in Sechahun iron ore deposit by geological boundary modification using multiple indicator Kriging

Uncertainty on the geological contacts and the block volumes of the models along boundaries is often a major part of the global uncertainty of reserve estimation.This work introduces a geostatistical technique that has been developed and tested in an iron ore deposit at Bafq mining district,in central Iran,and that,based on a probability criterion,helps to objectively model the geometry of this iron ore deposit.The main problem in reserve estimation of this ore body is its geometrical modeling and uncertainty in geological boundaries.This work deals with the geostatistical method of multiple indicator kriging,which is used to determine the real boundaries of ore body in different categories.This approach has potential to improve project performance and decrease operational risk.For this purpose,the ore body is separated into two categories including rich iron zone （w（Fe）〉45%） and poor iron zone （20%〈w（Fe）〈45%）.It significantly benefits to decrease the risk of reserve evaluation in the deposit.This case study also highlights the value of multiple indicator kriging as a tool for estimates the position of grade boundaries within the deposit.Comparison of the resultant probability maps with the real ore/waste contacts on the extracted levels shows that the first indicator model could separate the whole ore body （poor plus rich） from the waste zone by probability of more than 0.35,which concludes the total reserve of 53 million tons.The second indicator model applied to separate the rich and poor domains and the results show that the blocks with the estimated probability of equal to or more than 0.4 lay within the rich ore zone consisting of 15.8 million tons reserve.     

社会主义核心价值体系与高校校园文化建设

高校校园文化建设必须以社会主义核心价值体系来引领,它是社会主义核心价值体系的承担载体,也是学校精神文明建设的一部分。社会主义核心价值体系作为校园文化建设的核心,在引领校园文化建设方面,对青年大学生形成正确的价值观并且体现为他们的行动具有重大意义和深远影响。     

基于方波溶出伏安法同时测定贝类中的痕量铅、镉

在pH=5.2的HAc-NaAc缓冲液中,运用方波溶出伏安法同时测定贝类样品中的铅、镉离子。通过优化方波伏安检测条件,得到该检测方法的最佳参数：方波频率25Hz,方波振幅25mV,扫描速度4mV,沉积电位-1.1V,沉积时间120s。铅、镉离子分别在电位-0.571V与-0.743V附近产生灵敏的方波伏安溶出峰,在1×10-8-4×10-6mol/L范围内铅、镉离子的溶出峰电流与其物质的量浓度呈良好的线性关系,检出限分别为0.267μg/L,0.374μg/L,相关系数分别为0.9975,0.9995。该方法具有成本低廉、灵巧轻便、检测迅速等优势,可广泛应用于贝类等海产品的检测。     

Investigation of thickness and wax content of wax deposits in polyethylene pipe using a flow loop

In this study, the thickness and wax content of wax deposits were found to be thinner and lower in the polyethylene (PE) pipe than in the stainless steel (SS) pipe using a flow loop apparatus. The diffusivity of wax, radial thermal gradient, and wax precipitation rate in the PE and SS pipes were calculated and compared. It was found the diffusivity of wax in the PE pipe was higher and tended to enhance the wax deposition in the PE pipe, while the radial thermal gradient and wax precipitation rate were lower in the PE pipe and had the opposite effects. These factors are shown to be comparable with each other and the effect of the thermal gradient dominates the mass flux of wax from bulk to the oil-deposit interface and into the deposits finally, thus causing differences in thickness and wax content of deposits between the PE and SS pipes.     

一种新型的缓倾斜多层矿体采矿技术

针对传统缓倾斜多层矿体的采矿方法 ,如全面法、中深孔落矿下盘漏斗法和爆力运搬法等 ,生产能力小、劳动强度大、安全性差、成本高等缺点 ,从云南锡业公司松树脚锡矿“大马芦”矿段的实际开采技术条件出发 ,提出了一种新型颇有特色的缓倾斜多层矿体的采矿方法———深孔合采井下矿废分离连续采矿法。它采用大直径深孔合采矿岩、井下矿岩集中分离、连续采矿等技术 ,变革了传统的分采工艺 ,有效地克服了传统采矿方法的弊端 ,为缓倾斜多层矿体的高效、低耗和安全开采提供了新的技术方案。     

固溶时效工艺对C194合金性能的影响

对采用热轧开坯法生产引线框架用C194合金带材过程中的固溶处理与时效处理工艺条件进行了研究．通过试验确立了合适的热处理工艺条件，使带材的抗拉强度达到538．5MPa，电导率达81．8％IACS。     

THE PHYSICAL SIMULATION ON EXTRUSION PROCESS OF GLASS FIBER COMPOSITE WIRE COATED BY LEAD

The method of manufacturing the composite wire by extruding lead to coated glass fiber is described. The different composite wire that diameter is from 0.5 to 1.0mm has been produced by two kinds of different extruding technology (getting wire along horizontal direction and getting wire along perpendicular direction). The optimal extruding technological parameter has been given in different extruding technology by the physical simulation (H: 300℃, 550kN, 0.16mm. P: 300℃, 215kN, 0.16mm). The effect on the coating speed by other extruding technological parameters in the different extruding technology has been discussed. The extruding temperature and extruding force is higher, the coating speed is faster. It has been pointed, that the affection on the extruding technology by the extruding temperature has also behaved as the extruding temperature rising up spontaneously. The reason for exiting the minimum extruding force and maximum extruding force also has been discussion in this paper. It is also important to the extruding process and coating speed that is the coating clearance.     

PMN-PNN-PT单晶的固相法生长研究

采用两步法和埋入PMN-PT单晶为模板的等离子放电烧结（SPS）技术制备出了致密的单一钙钛矿相的PMN-PNN-PT陶瓷，随后在1200℃下退火100h来诱导晶体的生长。实验结果表明，PMN-PNN-PT单晶〈111〉方向的生长速度明显快于〈001〉方向，而〈111〉方向生长的晶体形状为V字形，这是由钙钛矿结构的生长机理决定的，钙钛矿结构晶体的生长是通过〈001〉方向的层状生长来实现的。     

卷绕铅酸电池泡沫铅负极电化学行为的研究

以泡沫铅作为负极集流体制备了卷绕VRLA电池.采用计时电流法、循环伏安曲线、电化学阻抗谱和充放电实验研究了泡沫铅负极的电化学行为,结果表明泡沫铅负极的真实表面积比铅箔负极的大,因此泡沫铅负极具有较低的过电势,并且不论是在怎样的放电状态下,泡沫铅负极的电化学反应电阻较小;与铅箔负极相比,在10、5和2小时率放电状态下,泡沫铅负极的质量比容量分别增加25.9%,30.0%和48.2%.此外,SEM观察显示,泡沫铅负极表面活性物质为更加细小的晶体颗粒和具有更高的孔率.