Improvement of photon collection in Cu(In,Ga)Se2 solar cells and modules by fluorescent frequency conversion

Fluorescent photon down conversion for the improvement of the blue response of ZnO/CdS/Cu(In,Ga)Se₂ heterojunction solar cells and modules is investigated. Fluorescent dyes of the series Lumogen® F are analyzed by optical transmission and reflection as well as by photoluminescence measurements. A spectral transfer matrix formalism is introduced that allows to predict the suitability of a luminescent dye as a down-converter for a given solar cell from its absorption/emission properties. We find that Lumogen® F Violet 570 and Lumogen® F Yellow 083 as well as a combination of both yields improvements for Cu(In,Ga)Se₂ solar modules. Particularly, we find that the short circuit current density of a Cu(In,Ga)Se₂ mini-module is improved by 1.5 mA cm^− 2 when applying a varnish with a combination of Lumogen® F Violet and Yellow. About 0.5 mA cm^− 2 of this improvement is due to a reduced overall reflectance and an improvement of 1 mA cm^− 2 results from the frequency conversion by the dyes.     

Polymerization behavior and polymer properties of eosin-mediated surface modification reactions

Surface modification by surface-mediated polymerization necessitates control of the grafted polymer film thicknesses to achieve the desired property changes. Here, a microarray format is used to assess a range of reaction conditions and formulations rapidly in regards to the film thicknesses achieved and the polymerization behavior. Monomer formulations initiated by eosin conjugates with varying concentrations of poly(ethylene glycol) diacrylate (PEGDA), N-methyldiethanolamine (MDEA), and 1-vinyl-2-pyrrolidone (VP) were evaluated. Acrylamide with MDEA or ascorbic acid as a coinitiator was also investigated. The best formulation was found to be 40 wt% acrylamide with MDEA which yielded four to eightfold thicker films (maximum polymer thickness increased from 180 nm to 1420 nm) and generated visible films from fivefold lower eosin surface densities (2.8 versus 14 eosins/μm²) compared to a corresponding PEGDA formulation. Using a microarray format to assess multiple initiator surface densities enabled facile identification of a monomer formulation that yields the desired polymer properties and polymerization behavior across the requisite range of initiator surface densities.     

LED产业分析报告

分析了LED发光二极管的基本特点、应用领域和巨大的市场需求。调查了国内公司生产情况；对比了目前LED研发技术指标和需求的差距，通过获得的数据分析比较我国的优势和劣势，并提出该产业的发展前景和建议。     

Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.     

The high-resolution time-of-flight spectrometer TOFTOF

The TOFTOF spectrometer is a multi-disc chopper time-of-flight spectrometer for cold neutrons at the research neutron source Heinz Maier-Leibnitz (FRM II). After five reactor cycles of routine operation the characteristics of the instrument are reported in this article. The spectrometer features an excellent signal to background ratio due to its remote position in the neutron guide hall, an elaborated shielding concept and an s-shaped curved primary neutron guide which acts i.a. as a neutron velocity filter. The spectrometer is fed with neutrons from the undermoderated cold neutron source of the FRM II leading to a total neutron flux of 10¹⁰n/cm²/s in the continuous white beam at the sample position distributed over a continuous and particularly broad wavelength spectrum. A high energy resolution is achieved by the use of high speed chopper discs made of carbon-fiber-reinforced plastic. In the combination of intensity, resolution and signal to background ratio the spectrometer offers new scientific prospects in the fields of inelastic and quasielastic neutron scattering.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

带吊车门式刚架轻型钢结构厂房的设计与分析

以实际工程为背景，采用门式刚架轻型房屋钢结构设计规程，对带吊车门式刚架、吊车梁、抗风柱及基础的受力特点、设计方法进行分析，解决了设计中所遇到的问题。     

纯相位空间光调制器动态控制光束偏转

提出并设计了一个采用液晶空间光调制器(LCSLM)作为光束动态偏转器件的无机械光束扫描系统,实现了光束的方向和强度的可编程控制,解决了远场任意图形的激光光束动态逼近问题。逼近方法采用纯相位调制技术和傅里叶迭代优化算法结合的衍射图形相位优化设计方法。介绍了点阵图形发生原理并给出实验装置图。实验结果显示,用该方法产生的二维阵列式光束,其光斑强度偏差度小于8%,图形发生响应时间小于100 ms,该实验结果能够满足多光束准确动态偏转的要求。该系统具有精确、响应快、无机械惰性等特点,在激光寻的、制导以及多目标威胁预警和反击中有着重要的研究价值。     

草酸铁络合物／H2O2／UV体系对靛红染料废水脱色的研究

以草酸铁络合物/H2O2作光氧化剂,利用紫外光对水溶性染料靛红进行了光氧化降解试验研究。结果表明,在pH值为3,[Fe(Ⅲ)]/[C2O42-]=1/3,H2O2为100 mg/L条件下,光照30 min后,质量浓度为30 mg/L的染料溶液其脱色率达到98.5%,COD去除率为54.4%。与UV/Fe3+、UV/H2O2、UV/草酸等光氧化体系相比,脱色效果较为明显。     

胶体中布朗粒子简谐束缚下准直高斯光束的动态光散射

在将散射粒子间的相互作用看作简谐力、入射光为准直高斯光束、散射光为理想平面光波的模型下研究了胶体溶液中布朗粒子的统计特征并求解了动态光散射的散射光电场强度的自相关函数；