米糠-硫酸直接浸锰工艺条件研究

以米糠及湘西软锰矿为原料,对米糠-硫酸直接浸锰制备硫酸锰的工艺条件进行了研究。结果表明,米糠-硫酸法浸锰的最佳工艺条件为:浸锰温度250℃,硫酸质量分数50%,浸锰时间75min,米糠用量为软锰矿粉质量的20%,硫酸用量为其理论用量的110%。按该工艺条件浸锰,锰的浸出率可达95%以上。该工艺具有能耗少、生产成本低、锰的浸出率高等优点,为软锰矿的开发利用开辟了一条新途径。     

极限训练机在矿山开采最大下沉值估算中的应用

矿山开采过程中采空区地表往往会发生形变,研究其最大下沉值对安全生产具有重要意义,现有的开采最大下沉估算方法还有提升的空间。基于岩移数据决策与极限训练机(Extreme learning machine,ELM)算法,提出了一种估计最大下沉的新方法。该方法将采厚、倾角、平均采深、走向长度、倾向长度和覆岩岩性确定为最大下沉值影响因素;应用以Sigmoid方程为核函数、隐含层神经元个数为114的ELM模型对最大下沉值进行了估算。通过案例分析,ELM模型得到了优于传统算法如CHAID、Boosted Tree、ANN、BPNN和SVM的RMSE、MAE、MAPE、最大残差及秩相关系数,故认为该模型是一种有效的矿山开采最大下沉估算方法。     

二氧化硫浸锰制备高纯碳酸锰

采用湘潭低品位的贫软锰矿为原料，对二氧化硫气体湿法浸锰、浸出液除杂、碳化结晶制备高纯碳酸锰的工艺进行了研究。实验得到二氧化硫浸锰的最佳工艺条件为：浸锰温度150～155℃，液固质量比3：1，二氧化硫体积分数6％～7％、流速1．5～2．0mL／min，浸锰时间3．0～3．5h。按该条件浸锰，锰的浸出率可达95％以上。该工艺为贫软锰矿的开发利用及有色金属冶炼厂二氧化硫废气的综合治理开辟了一条新途径。     

深海锰结核及其处理技术新探索

简述了深海锰结核的特征及冶金处理原则,综述了当今国内外对锰结核的处理技术的工艺过程、操作条件、金属回收率以及各自的优缺点。介绍了具有探索性意义的处理锰结核的新型还原剂BR法、三相氧化法。提出了使用FFC剑桥工艺处理锰结核得到锰铁合金或有价金属的新思路,并介绍了锰铁合金的用途。     

搅拌槽内絮凝动力学研究

采用激光粒度仪在线测定并研究了搅拌槽内聚丙烯酰胺与磷矿酸解渣的絮凝动力学。考察了不同浓度的酸解液，絮凝剂加入量，温度，酸解渣原始平均粒径和搅拌强度对絮凝动力学影响。在实验研究范围，絮凝初始速度随温度升高，絮凝剂加入量及搅拌强度的增加而提高，但随着酸解液的粘度增加和酸解渣原始平均粒径的增大而降低，体系中存在最佳的絮凝剂加入量。通过酸解渣的电泳试验，用自合成的阴离子，阳离子改性絮凝剂以及非离子型絮凝剂与酸解渣的絮凝试验发现，在中性的水中，酸解渣与不同荷电类型的絮凝剂的絮凝速度大小依次为：阳离子型＞非离子型＞阴离子型。而在磷酸酸解料浆中絮凝速度与絮凝剂的荷电类型无关。磷矿酸解渣与聚丙酰胺絮凝剂的作用主要表现为架桥机理。     

贵州省磷化工现状及发展前景

阐述贵州磷资源、煤炭、电力基本情况及在全国的地位和我省发展磷化工的重要意义。介绍我省磷化工生产现状、生产能力、实际产量、产品出口等情况。对世界磷化工产品市场需求，我国和我省的磷化工到2000年的发展情况，达到的目标进行初步援测和构想，并对我省磷化工发展对策进行探讨，提出几点建设性意见。     

Exploration of mesoporous structure of tunisian raw and acid-leached phosphate ore particles

Rock phosphate fractions were examined for their porous structure by nitrogen adsorption. The pore size distribution and the shape of pores does not seem to depend on the particle size. The specific surface area values present two regions, one above and one below that of the particles with 125 μrn diameter. Particles of a given size were leached with dilute phosphoric acid (1.5 mass% P₂O₅) at 25°C. It was observed that there is a widening of the initial pores during leaching. The particles collected at the initial period of the reaction are pitted and those collected at the final period are disintegrated.     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

自含砷合碳难处理金矿中提取金的研究─Ⅰ.氨水脱砷-石灰加压氧化-氰化

针对甘肃省坪定金矿含金、砷高、金部分地赋存于脉石、脉石为碱性、属于难选难冶矿的特点，提出了氨水脱砷－石灰加压氧化－氰化新工艺．当原矿含金8．7g／t及13．0％砷时，砷可脱除95％，金可浸出85％．技术及经济指标预计均较满意．     

硫酸脲分解磷矿反应机理探讨

以硫酸脲分解磷矿是一种新的N、P复肥生产方法,硫酸脲分解磷矿有其特殊的反应机理。利用在线显微摄像与物化分析相结合,可以很好地表征硫酸脲分解磷矿的反应机理。实验表明:硫酸脲与磷矿在液固接触的界面微区进行反应,反应微区内有离解、反应、结晶、复合等过程,并伴随有晶型转变。反应生成的硫酸钙晶体复盖反应粒子表面,形成包裹层增大传质阻力。反应物质通过CaSO40.5H2O晶膜的传递阻力是影响整个反应过程的重要因素。