Modelling aerodynamic sound in the airways of a human body: A possible diagnostic tool

The sound generated aerodynamically by a pillow-like body simulating an obstacle in the human airway is observed through a soft wall from outside the duct. It is intended to provide a physical basis for an attempted medical diagnostic technique for detecting an obstacle by observing the sound during breathing. So far at least two kinds of sound have been identified: One is sound of the half-jet flow formed downstream of the obstacle, and the other is sound due to unsteady motion of the separation point on the curved surface of the obstacle. For simulating the flow condition downstream of the vocal cords during inhalation, cases with an obstacle at various positions relative to a jet flow are also examined. In this case, the sound due to the downstream obstacle exhibits a complicated dependence on the geometry and flow parameters. Nevertheless, increase in the sound, or more correctly, deformation in the sound power spectrum, due to the presence of an obstacle is detectable from outside, opening up possibilities of its use as a diagnostic aid. Dedicated to the late Professor Itiro Tani on the occasion of 5ACFM, Taejon, Korea     

HL-1M装置的真空运行与质谱诊断

通过对 HL- 1M装置真空运行模式、真空运行参数、氦辉光放电清洗和硅化壁处理手段等的规范化 ,显著地改善了装置的真空壁出气、本底杂质浓度、托卡马克放电杂质出气比和再循环 ,成功地实现了高参数放电、长脉冲放电和装置暴露大气后快速恢复放电 ,并成功地为演证低混杂电流驱动、离子回旋共振加热、电子回旋共振加热、中性束注入、弹丸注入和分子束注入实验和升级等离子体运行等提供了良好的真空壁条件。描述了 HL- 1M装置真空系统、壁出气和再循环控制、质谱诊断和程序脉冲送气等方面的主要实验成果 ,并为 HL- 2 A装置的真空系统研制和运行提供了有益的参考     

柴达木盆地断裂上下盘油气差异聚集效应与成因

断裂沟通含油气盆地不同层位、不同时代的烃源岩和生储盖组合，成为连接烃源岩和各种圈阔的重要渠道，导致了多种类型的与断裂有关的油气藏的形成。柴达木盆地的断裂控烃特征明显，断裂上下盘油气差异聚集现象十分普遍，不同构造系统区具有不同的油气差异聚集机理和模式。其根本原因是断裂上下盘具有不同的地质特征和油气运聚成藏条件，它们往往是互为消长的关系。油气是富集在断裂的上盘，还是聚集在断裂的下盘，取决于具体的地质条件。     

混凝土多孔砖裂缝防治措施

分析了混凝土多孔砖墙体产生裂缝的原因,并详细阐述了混凝土多孔砖墙体裂缝的防治措施.     

60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响     

黑河右岸溢洪洞左导墙优化试验

黑河水利枢纽右岸溢洪洞为缩短引渠左导墙的长度,减少施工开挖量,降低施工难度,减少工程投资,进行优化试验.通过对7种不同的方案对比分析,选择了合适的体型,满足了工程要求.     

关于最远点判定及直径的唯一性

给出了点到有界集最远点的一些必要或充分条件，然后对直径的唯一性也给出了一些判定条件。     

“三软”煤层综放面特殊情况下支架拆除及沿空留巷

超化煤矿21091(西)综采工作面因出水造成工作面停产,在不超前15 m铺金属网的情况下进行支架拆除,并把原工作面留做炮采面切巷。根据实际情况制定了施工方案,并介绍了实施情况。     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

纳米孔"炭"和纳米孔"碳"——对碳质多孔材料的几点思考

对碳质纳米孔隙材料提出一种新的分类方法——基于孔壁结构分类。根据这种方法，碳质多孔材料分为：纳米孔“碳”（石墨烯纳米孔材料）和纳米孔“炭”（类石墨微晶纳米孔材料）。具有相近比表面积的两种碳质材料由于具有不同的孔壁结构而可能具有完全不同的物理化学性质（比如：电化学性质）。文中简要介绍了两种新型的纳米孔“碳”——单壁微孔“碳”和碳纳米管-DNA杂化物以及区分纳米孔“碳”和纳米孔“炭”的重要判据：拉曼光谱。