Adsorption and decomposition of H2S on Pd(1 1 1) surface: a first-principles study

Gradient-corrected density functional theory was used to investigate the adsorption of H₂S on Pd(1 1 1) surface. Molecular adsorption was found to be stable with H₂S binding preferentially at top sites. In addition, the adsorption of other S moieties (SH and S) was investigated. SH and S were found to be preferentially bind at the bridge and fcc sites, respectively. The reaction pathways and energy profiles for H₂S decomposition giving rise to adsorbed S and H were determined. Both H₂S_(ad) → SH_(ad) + H_(ad) and SH_(ad) → S_(ad) + H_(ad) reactions were found to have low barriers and high exothermicities. This reveals that the decomposition of H₂S on Pd(1 1 1) surface is a facile process.     

An integrated downstream processing strategy for the recovery and partial purification of penicillin acylase from crude media

An integrated process strategy for the recovery of penicillin acylase was developed, based on precipitation of non‐enzymatic proteins directly from Escherichia coli homogenates or crude extracts using Rolquat (quaternary ammonium salt) and adsorption of the enzyme on Amp‐Seph (3.8 µmole ampicillin cm^?3) under pseudo‐affinity conditions. The effect of pH, concentrations of ammonium sulfate and Rolquat, and also concentrations of protein and cell debris on the precipitation of non‐enzymatic proteins from homogenates and crude extracts of penicillin acylase were analysed. The method of addition of Rolquat to homogenates and crude extracts significantly influenced the size of the precipitated particles. Improved results on the specific activity of penicillin acylase were obtained for 22% and 1% (w/v) of ammonium sulfate and Rolquat, respectively, added sequentially to enzyme solutions and at room temperature. Under these experimental conditions, the specific activity of penicillin acylase in homogenates and crude extracts was enhanced 2.5–3.0‐fold. Finally, the integrated process strategy was implemented first by precipitation of non‐enzymatic proteins and recovery of penicillin acylase directly from the enzyme solution treated with Rolquat using an adsorption/filtration system with an overall yield of 86%. This system allows simultaneously the filtration of cell debris and fine precipitated particles, in situ recovery of penicillin acylase by its adsorption on Amp‐Seph, and selective desorption of the enzyme with a specific activity of 11 IU (mg prot)^?1 and a desorption yield of 95%. © 2002 Society of Chemical Industry     

Synthesis and characterization of radiation grafted copolymer for removal of nonionic organic contaminants

Nonionic organic contaminants such as phenol, benzene, and toluene from contaminated wastewater on laboratory scale can be effectively sorbed by cellulosic wood pulp sheet incorporated with three polar functional groups. The synthesis was carried out by graft copolymerization reaction of N,N‐dimethylaminoethylmethacrylate with methacrylic acid onto wood pulp. The preparation conditions at which the grafting process proceeds homogeneously are determined. Characterization and some selected properties of the original and grafted wood pulp were evaluated using FTIR and scanning electron microscope, also, the removal of phenol, benzene, and toluene on laboratory scale was investigated by using gas chromatography. It was found that phenol shows the highest removal percent than that of benzene and toluene. The efficiency of removal of the nonionic contaminants is found to be 97%, which shows a great promise for its applicability in the removal of organic contaminates from wastewater. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3589–3595, 2006     

Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents

To investigate the effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents, macroporous polystyrene (PS) resin and PS‐based adsorbents with different hydrogen‐bond acceptor atoms (PS CH₂( OCH₂CH₂)_n OCH₃, n = 0, 1, 2, and 3, denoted as PS‐EG₀, PS‐EG₁, PS‐EG₂, and PS‐EG₃) were prepared. The phenol adsorption strength order on these adsorbents was PS/PS‐EG₀ < PS‐EG₁ < PS‐EG₂ < PS‐EG₃, indicating that the adsorption on PS and PS‐EG₀ was driven by hydrophobic and π–π interactions, and the adsorption on PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by a hydrogen bond in addition to hydrophobic and π–π interactions. PS‐EG₂ may adsorb a second phenol molecule on each binding site and PS‐EG₃ may adsorb second and third ones. The adsorption strength of resorcinol increased in the order of PS, PS‐EG₁, and PS‐EG₂, indicating that the adsorption was driven by 0, 1, and 2 hydrogen bonds in addition to hydrophobic and π–π interactions. Similarly, the adsorption of phloroglucinol on PS, PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by 0, 1, 2, and 3 hydrogen bonds in addition to hydrophobic and π–π interactions because the adsorption strength increased in this order. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4652–4658, 2006     

壳聚糖对持久性有机污染物吸附研究

以甲壳素为原料,110℃下浸泡在50%氢氧化钠溶液中间歇反应3h,用蒸馏水洗至中性,60℃烘干,得到产物壳聚糖,经测定产物脱乙酰度＞95%,25℃下1%壳聚糖溶液(溶于100ml 1%的乙酸水溶液中)粘度为100mPa·s.研究了吸附条件对吸附容量的影响,在弱酸性水溶液中吸附速度较快,3h后吸附趋于平衡.室温下,pH为4的水溶液中壳聚糖对所试污染物的饱和吸附容量分别为酸性红B 442mg/g、酸性嫩黄G 419mg/g、十二烷基苯磺酸钠345mg/g、R盐98mg/g.壳聚糖作为一种新型环保材料,具有制备方法简单,对水溶性有机污染物吸附速度快,吸附容量大等优点.     

Recovery of pyruvic acid with weakly basic polymeric sorbents

BACKGROUND: Carboxylic acids are among the most important substances that can be manufactured from biomass. However, the recovery of carboxylic acids from fermentation broths presents a challenging separation problem. To avoid the production of waste salts and net consumption of chemicals in the calcium carboxylate salt process, the use of reversible chemical complexation with polymeric sorbents and extractants is attractive for carboxylic acid recovery. Pyruvic acid is widely used in the manufacture of medicines, pesticides and foodstuffs and can be produced by fermentation. Since the acidity of pyruvic acid (pK_a = 2.49) is stronger than that of normal carboxylic acids, and as few reports on the recovery of pyruvic acid are available, the sorption of pyruvic acid from aqueous solution on two types of weakly basic polymeric sorbent, tertiary amine D301R and primary amine D392, was investigated over a wide pH range and at various salt (MgSO₄) concentrations. RESULTS: Overloading adsorption of pyruvic acid on both weakly basic polymeric sorbents occurred, with the overloading of D392 being greater than that of D301R. The adsorption of pyruvic acid on both sorbents was greatly affected by the solution pH and the salt concentration in the aqueous phase. An overloading model was able to predict the experimental uptake data very well. CONCLUSION: Solution pH is one of the most important operating conditions, and both polymeric sorbents D392 and D301R can be used to recover pyruvic acid from dilute aqueous solution with high efficiency at a solution pH around 2. The uptake by D392 is greater than that by D301R owing to steric hindrance of the tertiary amine. Copyright © 2008 Society of Chemical Industry     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface adsorption of comb polymers by Monte Carlo simulations

This paper reports off-lattice Monte Carlo simulations of highly-branched comb homopolymers weakly adsorbed on a flat, featureless surface showing only covolume and dispersion interactions with the adsorbate. A minimal coarse-grained model, described by hard spheres connected by harmonic springs, was employed. The interaction energy of the adsorbed combs and linear chains is first discussed as a function of the molecular mass and of the number of beads in contact with the surface. The molecular size is then investigated as a function of backbone length and branching density at a fixed arm size. The apparent swelling exponents of the adsorbed combs are larger than those of the corresponding linear chains, and much larger than that of the free molecules. This result indicates a surface-induced stiffening of the comb backbone, further studied through the persistence length l_pers. It is found that l_pers increases upon adsorption over the free-molecule value, more so the larger is the branching density. Finally, the thickness of the adsorbed layer, the surface-induced molecular anisotropy and the molecular aspect ratio are investigated as a function of branching density and molecular mass.     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

分形理论在固体吸附式制冷系统中的应用研究

固体吸附式制冷系统中吸附剂一般是多孔介质结构，吸附剂的内部结构特征对传热特性和吸附质的传质特性有直接影响，进而影响吸附解吸时间。本文探讨利用分形理论来分析固体吸附剂的结构特点，为目前通过对吸附剂的固化处理来提高吸附剂的传热速率的处理方法提供理论上的分析，并指出最佳分形维数的分形结构。