Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method

In this study, firstly, thermal analyses are investigated on a conventional (uncoated) diesel piston, made of aluminum silicon alloy and steel. Secondly, thermal analyses are performed on pistons, coated with MgO-ZrO₂ material by means of using a commercial code, namely ANSYS. Finally, the results of four different pistons are compared with each other. The effects of coatings on the thermal behaviors of the pistons are investigated. It has been shown that the maximum surface temperature of the coated piston with material which has low thermal conductivity is improved approximately 48% for the AlSi alloy and 35% for the steel.     

手势语言识别的神经网络方法

提供了一种用于人机交互（HCI）的手势语言可视化识别方法。该方法包括用于几种控制命令的手势的探测、分割、特征提取及识别，第一步的处理都用到了神经网络方法，像肤色探测、主元分析（PCA）以及在编码识别。实验结果显示正确识别率高达94％。     

瞬态气体温度传感器研究

本文介绍了作者研制的瞬态气体温度传感器.针对传感器敏感元件的结构设计，应用等效物理模型，对影响温度测试精度和动态响应的结构参数以及使用方法进行了计算分析.研制出的温度传感器经激波管动态标定，证明其具有百微秒级的动态响应.本文最后介绍了在倒拖工况下，柴油机缸内瞬态气体温度的测试结果．     

运用韦柏函数分析发动机燃烧过程时若干问题的探讨

探讨了韦柏函数的内涵及其在实际应用中的若干问题；应用双韦柏函数对涡流室式柴油机的燃烧过程进行分析，加深了对分隔室式发动机燃烧过程的认识．     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

超高增压柴油机与斯特林发动机复合运行的分析

本文对超高增压柴油机与斯特林发动机的复合运行进行了初步的探讨,陈述了这种复合运行作为未来发动机技术发展方向之一的可能性。     

Effects of high molecular weight component on crystallization of polyethylene under shear flow

Crystallization of polyethylene (PE) blends of low and high molecular weight components under shear flow was studied using time-resolved depolarized light scattering (DPLS), focusing on effects of the high molecular weight component on the shish-kebab structure formation. Anisotropic two-dimensional scattering pattern due to shish-like structure formation was observed above a certain concentration of the high molecular weight PE. The threshold was about 2.5-3 times larger than the chain overlap concentration, suggesting an important role of entanglements of the high molecular weight component. On the basis of these results a gel-spinning-like mechanism for the shish-like structure formation has been proposed. The DPLS results also implied that the shish-like structure was mainly formed from the high molecular weight PE. This was confirmed by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) measurements on an elongated PE blend of low molecular weight deuterated PE and high molecular weight hydrogenated PE (3 wt%).     

厌氧胶快速渗补技术在汽车发动机上的应用

将金属铜易与过氧化物发生氧化还原反应生成游离基的原理应用于厌氧胶，开发了针时金属零件表面微孔进行局部渗补的实用技术。在相关技术可靠性和工艺可行性得以论证的前提下。将局部渗补技术成功地应用于渗补发动机泄漏缸盖，减少了废品损失，取得了良好的经济效益。     

蜡晶改进剂对润滑油馏分中蜡组分结晶控制作用的研究

抚顺石油一厂通过大量试验和溶剂脱蜡装置的连续生产证明:加工减二线,套管易上压,滤机上蜡饼泡松易堆蜡,应选用合适的改进剂以控制蜡晶生成树枝状;减四、五线重馏分蜡晶细密,套管不易上压,滤机易失效,应选用和适当加入合适的改进剂以增大聚集状晶体粒度;减三线蜡晶粒度大,为套管上压周期较长,滤机上蜡饼通透性好,滤速快,可根据需要决定是否使用改进剂。提出了针对不同润滑油馏分中不同蜡晶型选用合适的蜡晶改进剂可以相应解决不同馏分的生产难点,提高处理能力,改善产品质量。     

基于主元分析的多变量统计过程的故障辨识技术

为了更好的进行故障检测与诊断，介绍了主元分析理论，给出了基于主元分析的过程故障辨识机理及策略。仿真实例表明，利用此方法建立的故障诊断模型，能够在不依赖过程机理的前提下高效抽取原始数据空间的主要变化信息，对过程的非正常变化做出反应，同时还能较正确地找出发生故障的原因以及相应环节。