Properties and Performance of Cation-Doped Ceria Electrolyte Materials in Solid Oxide Fuel Cell Applications

Cation-doped CeO₂ electrolyte has been evaluated in single-cell and short-stack tests in solid oxide fuel cell environments and applications. These results, along with conductivity measurements, indicate that an ionic transference number of ∼0.75 can be expected at 800°C. Single cells have shown a power density >350 mW/cm². Multicell stacks have demonstrated a peak performance of >100 mW/cm² at 700°C using metallic separators.     

轻水堆发展规划的核燃料循环模型及优化

一、前言提高核燃料循环的经济性是增进核动力经济性极为重要的一环。国外有人提出利用动态线性规划方法,依据燃料循环中各环节内在的物理和化工过程,建立起一系列线性方     

乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

Highly active lanthanum doped nickel anode for solid oxide fuel cells directly fuelled with methane

Lanthanum doped nickel and YSZ composite anode (LaNi–YSZ) exhibited a greatly reduced polarization resistance and high performance for electrochemical oxidation of hydrogen and methane, which resulted from a fine anode structure with a high dispersion of nickel catalyst and a high catalytic activity towards methane.     

燃气加臭设备与臭剂的选择

介绍了城市燃气加臭设备的要求和工艺流程，并讨论了臭剂的要求与选择原则。     

车用燃料LNG、CNG及汽油的性能比较

从环保性、经济性、安全性等方面对液化天然气(LNG)、压缩天然气(CNG)及汽油3种车用燃料进行了性能比较。指出CNG的环保性和经济性比汽油好,LNG的经济性与安全性优于CNG。由此表明LNG在汽车上的应用是可行的。     

FH-5A 加氢精制催化剂的研制

为适应加工高硫馏分油的需要，研制成功了加氢精制催化剂FH－5A。该剂以含硅氧化铝为载体、Mo-Ni为活性组分，并添加少量助剂而制得。FH－5A工业放大催化剂在氢分压3．4MPa、空速2．5h^-1、反应温度350℃的加氢条件下在小型装置处理伊朗催化裂化柴油和沙特轻质直馏柴油的混合油（30：70），可将原料油中硫含量由9000μg/g，氮含量由432μg/g降至47μg/g。评价试验表明，FH－5A加氢精制催化剂可满足中东高硫直馏柴油、二次加工柴油及其混合柴油加氢精制的需要。     

燃料电池质子交换膜的研究进展

本文从质子交换膜的发展入手 ,指出全氟磺酸型质子交换膜是目前最适合燃料电池的膜材料 ,并对其结构特点及优缺点进行了重点分析 ,论述了目前质子交换膜的发展趋势     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.