基于致动线模型的风力机尾流场数值模拟

本文基于致动线模型求解三维Navier-Stokes方程的方法,对NTNU的"BlindTest1"风力机尾流场进行了数值模拟。该方法避免了求解实际叶片的表面边界层,无需使用动网格,从而大大降低了网格量和计算时间,非常适用于尾流场的模拟。该文所有计算均基于OpenFOAM自定义的求解器ALMpisoFoam。推力和功率的计算值与实验值吻合得很好,验证了求解器的正确性。3个典型叶尖速比下的轴向诱导因子、湍动能和尾涡结构等也在文中进行了简要分析。     

Cold model experiment on dynamic behavior of dross in hot dip plating bath

The motions of top and bottom dross in a continuous hot dip plating bath were investigated using a transparent cold model vessel with a reduced scale of one-tenth. The flow field in the model bath was classified into three regions as usual; the entry region, the exit region, and the region enclosed with a belt. This belt was used as a model for a strip. Polystyrene particles were used as models both for the top and bottom dross while NaCl aqueous solutions of different densities were used as models for plating melts. The motions of model particles were observed by eye inspection and by using a high-speed video camera. Local particle frequency and particle holdup were measured with a newly developed sensor. Typical streak lines for the top and bottom dross particles were similar to main stream lines in the bath. Both the top and bottom dross particles were rich in the region enclosed with the belt. A lot of top dross particles floated on the bath surface near the side walls, while many bottom dross particles stayed on the bottom wall in the entry region.     

萍乡市湘东区工业园铁路专用线装卸工艺的选择

通过对焦化厂铁路专用线装卸工艺需满足专业化、自动化和满足铁路车辆周转时间要求等重要因素的分析研讨,对萍乡市湘东区工业园铁路专用线装卸工艺进行了合理的选择,指出该专用线装卸工艺采用翻车机和筒仓配合,达到了预期的要求。     

A fast branch,bound and remember algorithm for disassembly line balancing problem

In recent years, the interests of disassembly line have increased owing to economic reasons and the increase of environmental awareness. Effective line can provide many advantages in terms of economic aspect and it facilitates competition the companies with others. This study contributes to the relevant literature by a branch, bound and remember algorithm for disassembly line balancing problem with AND/OR precedence. The proposed exact solution method employs the memory-based dominance rule to eliminate the reduplicated sub-problems by storing all the searched sub-problems and to utilise cyclic best-first search strategy to obtain high-quality complete solutions fast. In this paper, minimising the number of stations is taken as the performance measure. The proposed methodology is tested on a set of 260 instances and compared with the mathematical model using CPLEX solver and five well-known metaheuristics. Computational results show that the proposed method is capable of obtaining the optimal solutions for all the tested instances with less than 0.1?seconds on average. Additionally, comparative study demonstrates that the proposed method is the state-of-the-art algorithm and outperforms the CPLEX solver and metaheuristics in terms of both solution quality and search speed aspects.     

Balancing of parallel U-shaped assembly lines

A new hybrid assembly line design, called parallel U-shaped assembly line system, is introduced and characterised along with numerical examples for the first time. Different from existing studies on U-shaped lines, we combine the advantages of two individual line configurations (namely parallel lines and U-shaped lines) and create an opportunity for assigning tasks to multi-line workstations located in between two adjacent U-shaped lines with the aim of maximising resource utilisation. Utilisation of crossover workstations, in which tasks from opposite areas of a same U-shaped line can be performed, is also one of the main advantages of the U-shaped lines. As in traditional U-shaped line configurations, the newly proposed line configuration also supports the utilisation of crossover workstations. An efficient heuristic algorithm is developed to find well-balanced solutions for the proposed line configurations. Test cases derived from existing studies and modified in accordance with the proposed system in this study are solved using the proposed heuristic algorithm. The comparison of results obtained when the lines are balanced independently and when the lines are balanced together (in parallel to each other) clearly indicates that the parallelisation of U-shaped lines helps decrease the need for workforce significantly.     

当归红芪超滤物对重离子12C6+辐射肝癌细胞DNA损伤修复的影响

将人肝癌H22细胞分成4组,分别为对照组、药物组(100 mg/L)、辐射组(2 Gy)及联合组(100 mg/L药物 + 2 Gy照射),采用CCK-8法、单细胞凝胶电泳、γ-H2AX免疫荧光原位杂交技术以及Western Blotting印迹法,研究当归红芪超滤物(Radix Angelicae Sinensis and Radix Hedysari, RAS-RH)对重离子¹²C⁶⁺辐射引起人肝癌H22细胞DNA损伤修复的影响和其可能的机制。结果表明,在0～72 h和给药剂量为5～200 mg/L范围内,RAS-RH对人肝癌H22细胞的增殖抑制作用具有时间和剂量依赖性,其20%抑制浓度IC₂₀为(117.6±2.15)mg/L;单细胞凝胶电泳显示联合组头部DNA含量低于辐射组,而尾部DNA含量、尾距TM、Olive尾距OTM均高于辐射组;γ-H2AX免疫荧光原位杂交技术发现RAS-RH不增加重离子¹²C⁶⁺辐射引起的DNA损伤,但在2—12 h,DNA双链断裂的γ-H2AX foci修复作用被RAS-RH抑制,DNA损伤持续存在;Western Blotting显示RAS-RH通过下调Ku70/80及Rad51的蛋白表达,抑制γ-H2AX的聚集。以上结果说明RAS-RH对人肝癌H22细胞的辐射增敏作用可能是下调DNA损伤修复相关因子Ku70/80及Rad51的表达。     

Lagrangean relaxation approach to joint optimization for production planning and scheduling of synchronous assembly lines

This paper focuses on simultaneous optimisation of production planning and scheduling problem over a time period for synchronous assembly lines. Differing from traditional top-down approaches, a mixed integer programming model which jointly considers production planning and detailed scheduling constraints is formulated, and a Lagrangian relaxation method is developed for the proposed model, whereby the integrated problem is decomposed into planning, batch sequencing, tardiness and earliness sub-problems. The scheduling sub-problem is modelled as a time-dependent travelling salesman problem, which is solved using a dynasearch algorithm. A proposition of Lagrangian multipliers is established to accelerate the convergence speed of the proposed algorithm. The average direction strategy is employed to solve the Lagrangian dual problem. Test results demonstrate that the proposed model and algorithm are effective and efficient.     

广西大新锰矿280m平硐掘进机械化作业线的配套方式

简述国内平巷掘进机械化作业线的配套方式和适用条件,介绍了广西大新锰矿280m平硐掘进机械化作业线的配套方式。采用YT-28气腿式凿岩机、LD-120型挖斗式装岩机、8m3的S8型梭式矿车和10 t架线式电机车机械化作业线配套方式取得较好效果。     

Generalized neural network and wavelet transform based approach for fault location estimation of a transmission line

To maintain the efficient and reliable operation of power systems, it is extremely important that the transmission line faults need to be detected and located in a reliable and accurate manner. A number of mathematical and intelligent techniques are available in the literature for estimating the fault location. However, the results are not satisfactory due to the wide variation in operating conditions such as system loading level, fault inception instance, fault resistance and dc offset and harmonics contents in the transient signal of the faulted transmission line. Keeping in view of aforesaid, a new approach based on generalized neural network (GNN) with wavelet transform is presented for fault location estimation. Wavelet transform is used to extract the features of faulty current signals in terms of standard deviation. Obtained features are used as an input to the GNN model for estimating the location of fault in a given transmission systems. Results obtained from GNN model are compared with ANN and well established mathematical models and found more accurate.     

Installation and commissioning of a cryogen distribution system for the TPS project

A cryogen distribution system was installed and commissioned to transfer liquid nitrogen (LN₂) and liquid helium (LHe) from storage dewars to superconducting radio-frequency (SRF) cavities for the 3-GeV Taiwan Photon Source (TPS) project. The cryogen distribution system comprises one distribution valve box (DVB), four control valve boxes (CVB) and seven sections of multichannel transfer line (MCL). The DVB distributes the LHe and LN₂ to the CVB, and then to the SRF cavities through independent vacuum-jacketed transfer lines. The vaporized GHe and GN₂ from the cryomodules are collected via the MCL. The cryogen distribution system was installed and commissioned from October 2014 to the end of March 2015. This paper presents the installation, pre-commissioning and commissioning of the cryogen distribution system, and describes the heat load test. Thermal acoustic oscillation (TAO) was found in the GHe process line; this phenomenon and its solution are also presented and discussed.