DS90C363/DS90CF364 LVDS发送/接收器在数字RGB液晶屏上的应用

通过在FPD铁路上使用LVDS技术可使具有数字RGB接口的液晶显示屏的工作距离大大增加。文章通过一个具体应用环境介绍了21位LVDS发送器/接收器DS90C363/DS90CF364传输套片的主要特性、引脚功能、工作原理，同时指出了在具体设计使用时的注意事项。     

Impact on the photothermal emission from single wall nanotubes by some alkali halide salts

We demonstrate that alkali-halide salts, particularly potassium bromide, can reduce the photothermal emission (PTE) from single walled carbon nanotubes (SWNT). PTE is a prominent spectral feature in Raman spectroscopy when a near infrared laser is used to analyze a dark colored sample. We subsequently show that trapping salts inside SWNT and coating SWNT with the salt has a more pronounced impact on not only reducing PTE, but also enhancing the intensity of the Raman spectral features. The effect, which we have called nanotube enhanced Raman spectroscopy (NERS), has differences and similarities to the widely studied surface enhanced Raman spectroscopy (SERS).     

微波辅助合成3,4-二氨基苯甲酸

以对氨基苯甲酸为原料,在微波辐射下经乙酰化、硝化、水解及还原反应制得3,4-二氨基苯甲酸(Ⅰ),总收率为67．6%(未用微波辐射时为40．7%),反应时间由6 h缩短为1 h,并探讨了合成条件。在n(p- H2NC6H4COOH):n(Ac2O)=1:2,微波功率800 w的条件下,回流5 min,对乙酰胺基苯甲酸(Ⅱ)的收率为93．8%;n(Ⅱ):n(Ac2O)=1:2,使用过量乙酸酐,在冰水浴中滴完浓硝酸后,在微波功率800 W,回流3 min后,4-乙酰氨基-3-硝基苯甲酸(Ⅲ)的收率为85．3%;在微波功率800 W条件下,Ⅲ与过量的w(KOH)= 50%乙醇溶液,回流5 min,3-硝基-4-氨基苯甲酸(Ⅳ)的收率为93．1%;在Ⅳ的乙醇溶液中,在回流温度下滴加w[(NH4)2S]=9%硫化铵溶液,然后,在微波功率800 W条件下,回流5 min,可得90．8%的目标产物Ⅰ。用IR、1H NMR对化合物Ⅰ～Ⅳ进行了表征。     

催化裂化装置生产异戊烯的模拟计算研究

应用HYSIM模拟软件,对催化裂化(FCC)装置获取碳五馏分的各种方案进行了研究,并对各方案的优缺点进行了评述。仅有一套FCC装置的炼油厂或者同时拥有几套FCC装置但各装置稳定汽油辛烷值接近的炼油厂,推荐采用塔底方案。炼油化工型企业可考虑塔顶方案或侧线方案。     

3-N-丙酰基-2-芳基-5-(3-碘苯基)-1,3,4-(噁)唑啉类化合物的合成及表征

以3-碘苯甲酸为原料，在浓硫酸作用下与乙醇反应制得3-碘苯甲酸乙酯（1），再以无水乙醇为溶剂，在105℃化合物1与80％的水合肼反应8h，制得3-碘苯甲酰肼（2）。在无水乙醇中，在90～95℃化合物2分别与4-甲基苯甲醛、2-氯苯甲醛、4-氯苯甲醛、4-羟基苯甲醛、2，4-二氯苯甲醛、4-甲氧基苯甲醛、3-硝基苯甲醛、4-硝基苯甲醛和4-二甲氨基苯甲醛反应得到相应的酰腙E3（a～i）]。最后化合物3（a～i）分别与丙酸酐脱水环化成了3-M丙酰基-2-芳基-5-（3-碘苯基）-1，3，4-噁唑啉类化合物E4（a～i）]，收率分别为86．2％，70．5％，80．1％，68．2％，62．4％，75．2％，73．2％，70．5％和63．2％。并通过元素分析，IR，^1H NMR和MS对化合物4（a～i）的结构进行了表征。     

溶胶-凝胶法制备Na_2WO_4~-Mn/SiO_2催化剂及其甲烷氧化偶联反应性能的研究

采用溶胶-凝胶法制备了一系列5%Na2WO4-2%Mn/SiO2催化剂;用XRD、XPS、BET、O2-TPD和CO2-TPD等方法对催化剂进行了表征,并考察了对甲烷氧化偶联反应的催化性能。结果表明,与常规浸渍法相比,采用溶胶-凝胶法制备的Na2WO4-Mn/SiO2催化剂中W和Mn的原子浓度在催化剂表面和体相分布较为接近,而且两种制备方法所得的催化剂具有相似的催化性能,Na2WO4与α-方石英之间的相互作用,催化剂释放晶格氧的能力,碱性强弱是影响甲烷氧化偶联活性的关键因素。     

博兴洼陷沙四上亚段高精度层序格架研究

博兴洼陷下第三系沙四上亚段滩坝砂体十分发育，主要是一套砂泥岩的薄互层，横向变化快，在地震剖面上难以识别和描述，用常规的地质研究方法难以预测砂体的分布趋势。本文应用高精度层序地层学的原理和方法，通过测井、岩心资料的综合分析，重点对沙四上亚段进行了高精度层序地层划分，共识别出了5个具有等时意义的水进面（四级层序界面），建立了洼陷内沙四上亚段的四级层序格架，在四级层序格架基础上进行了沉积体系分析，并对层序发育的控制因素进行了探讨。本研究对洼陷内隐蔽油气藏的进一步勘探具有重要的指导意义。     

An MPEG‐4 Compliant Interactive Multimedia Streaming Platform Using Overlay Networks

This paper presents a multimedia streaming platform for efficiently transmitting MPEG‐4 content over IP networks. The platform includes an MPEG‐4 compliant streaming server and client, supporting object‐based representation of multimedia scenes, interactivity, and advanced encoding profiles defined by the ISO standard. For scalability purposes, we employ an application‐layer multicast scheme for media transmission using overlay networks. The overlay network, governed by the central entity of the network distribution manager, is dynamically deployed according to a set of pre‐defined criteria. The overlay network supports both broadcast delivery and video‐on‐demand content. The multimedia streaming platform is standards‐compliant and utilizes widespread multimedia protocols such as MPEG‐4, real‐time transport protocol, real‐time transport control protocol, and real‐time streaming protocol. The design of the overlay network was architected with the goal of transparency to both the streaming server and the client. As a result, many commercial implementations that use industry‐standard protocols can be plugged into the architecture relatively painlessly and can enjoy the benefits of the platform.     

机载高分辨力SAR实时运动补偿的实现

本文详细地分析了载机运动误差与回波相位的关系,提出了基于G4DSP信号处理板的机载SAR实时运动补偿方法,该方法利用G4DSP的四个CPU构成流水线处理器,采用子孔径方法分段提取回波的多普勒调频斜率,然后利用调频斜率的变化计算载机的运动误差,通过相位误差函数与方位数据的时域相乘补偿运动误差。实时信号处理机的实验表明,本文方法能实时和有效的实现机载SAR运动补偿,获得满意的成像质量。     

Ring‐opening polymerization of lactones initiated by diphenylzinc–coinitiator systems

Diphenylzinc, alone or in combination with water and butanone as coinitiators, was used as a polymerization initiator system for a variety of lactones at varying temperatures. The resulting data indicate that the course of the polymerization is greatly influenced by the lactone structure, as well as by the molar ratio of coinitiator to diphenylzinc. When used alone, diphenylzinc exhibited high activity as an initiator in δ‐valerolactone polymerizations, although it was less efficient when used in the β‐butyrolactone and the β‐propiolactone polymerizations. Activity in the polymerization of β‐lactones was increased by adding small amounts of butanone or water. It was also observed that the diphenylzinc–butanone combination was more effective than the diphenylzinc–water mixture in the polymerizations of β‐butyrolactone and β‐propiolactone. Copyright © 2003 Society of Chemical Industry