Application of annexation principle of thermodynamic property of In-Pb-Sb and In-Bi-Pb melts

Based on the principle of annexation and phase diagrams, the structural units of In-Pb-Sb and In-Bi-Pb melts were determined, and their calculating models of mass action concentrations were formulated. Calculated results agree well with practical values, which in turn show that the models deduced can reflect the structural realities of corresponding melts and the principle of annexation is applicable not only to some binary metallic melts, but also to ternary metallic melts.     

泥沙的“旋浮”

阐述了螺旋管流中泥沙“旋浮”的机理，运动轨迹、含沙量分布、挟沙力及能耗诸方面的理论分析与试验结果，并讨论了它与悬浮的关系，为工程应用提供可靠的依据。     

循环风与瓦斯浓度的关系

通过循环风时对瓦斯污染数学模型的建立 ,详细阐述了在各种情况下 ,瓦斯浓度的变化情况及治理措施。     

多输入单输出逆高斯分布流域汇流模型

本文将逆高斯分布应用于由水库和区间组成的复杂的流域汇流系统，并建立了多输入单输出逆高斯单位线模型。讨论了模型参数的估计方法，并对沾益流域的雨洪资料进行了实例分析。     

分段控温黄原胶发酵过程

温度是影响黄原胶发酵的重要因素之一。为了优化黄原胶发酵过程的温度控制,在5 L通气式搅拌发酵罐中,非溶氧限制的条件下,对恒温黄原胶发酵过程进行了研究。结果显示,发酵温度为28℃时,在发酵稳定期有较高的菌体浓度,所得黄原胶的丙酮酸含量与表观粘度较高,但有较长的发酵周期。而发酵温度为33℃时,有较短的发酵周期,在发酵稳定期有较高的比产胶速率,但所得黄原胶的丙酮酸含量与表观粘度较低。实验测定了控制黄原胶发酵生长期温度为28℃,稳定期温度为33℃的发酵过程数据。结果表明,与恒温发酵过程相比,通过温度的分段控制可以缩短发酵周期,提高产胶浓度及改善胶的品质,分段控温是黄原胶发酵的一种方便有效的调节手段。     

Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Fast determination of critical eluent composition for polymers by gradient chromatography

Gradient chromatography was applied in order to calculate the composition at elution for different methacrylates on normal phase columns. In addition the composition at elution was determined for polyethyleneoxide on a reverse phase column. It is shown that high molar mass polymers elute for a given homopolymer irrespective of their molar mass at the same eluent composition, which varies only slightly with gradient slope. In general the composition at elution in gradient chromatography is expected to be slightly lower than the true critical composition. For high molar mass polymers we found this composition to be close to the critical composition determined by isocratic experiments. The difference between the composition at elution and the true critical composition for a variety of polymethacrylates and for polyethyleneglycol was found to be only between 0.2 and 5%. Thus, after estimating the composition at elution, only a small number of additional isocratic experiments is needed to find the exact critical composition.     

Structural and Superconducting Property Variations with Nominal Mg Non‐Stoichiometry in MgxB2 and Its Enhancement of Upper Critical Field

By applying a combination of characterisation tools, changes in structural and superconducting properties with nominal Mg non‐stoichiometry in Mg_xB₂ are found. The non‐stoichiometry produces enhanced in‐field critical current densities (J_c's) and upper critical field / irreversibility field (H_c2/H_irr(T)) values. Upper critical fields of ～ 21 T (4.2 K) were obtained in nominal Mg‐deficient samples compared to ～ 17 T (4.2 K) for near‐stoichiometric samples.     

Ability of a contactless inductive device for the characterization of the critical current versus temperature in superconducting rings at temperatures close to TC

Critical current measurements for three polycrystalline rings of YBCO, three Bi-2223, and one YBCO + Ag were developed from a temperature close to 80 K to the critical temperature using a previously reported contactless inductive device based on the transformer method. These data were used to analyze the ability of this device to characterize, in superconducting rings, the Ginzburg-Landau, Ambegaokar-Baratoff, and De Gennes regimes as well as the crossover temperature between them.