Study on Hot Deformation Cracks of Steel D2 Using Procesing Map

ＳｔｕｄｙｏｎＨｏｔＤｅｆｏｒｍａｔｉｏｎＣｒａｃｋｓｏｆＳｔｅｅｌＤ２ＵｓｉｎｇＰｒｏｃｅｓｉｎｇＭａｐＧａｏＳｈａｎ，ＬｉｕＸｉａｎｇｈｕａ，ＷａｎｇＧｕｏｄｏｎｇＡＢＳＴＲＡＣＴＴｈｅｈｏｔｄｅｆｏｒｍａｔｉｏｎｂｅｈａｖｉｏｒｓｏｆｓｔｅｅｌ...     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

国际函件处理信息系统设计

本文试图从系统整体及行业MIS建模方法出发，对国际函件处理信息系统进行了系统设计．在设计中，遵循了对象模板法的开发思想，采用了FoxPro与Excel相结合的技术．所开发出的系统功能较齐全，人权界面友好，具有一定的推广应用价值．     

Using Multimedia to Support Cooperative Editing

By Cooperative Editing we mean the coordinated manipulation of information by a group of authors. During the editing process the (co-)authors need to communicate their ideas, drafts and constraints (remotely or face-to-face) until a final version of the information is achieved. For the different phases of this process - discussion of ideas, editing, cross-checking - different media or media integration are adequate. Furthermore, analysing the transition from individual work to group work, within different human activities, two pitfalls are often detected if computer support is considered: a) technological communication difficulties, especially if the group is remotely located on heterogeneous hardware, associated with a fall in productivity and frequent social inadequacies of the group's computer support; b) the lack of integrated media processing tools available for group editing. In order to solve these problems, we suggest that Multimedia can be applied in two ways: to effectively support the necessary group communication links; and to enhance the expressiveness of the information edited. To test this statement we have been conceptualising and implementing a prototype system. Most of the techniques involved can be used in other tools that need multimedia capabilities or that support other specific types of group activities. The innovative aspects of the work are the use of multimedia techniques to support demanding applications, possibly on cross-platforms, and the integration of several concepts to support cooperation.     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

文明寨油田微生物调驱矿场试验

针对文明寨油田高温高盐的特点,引进了一种耐温耐盐的FM复合微生物菌种。室内评价表明, 该菌种适应高温高盐油层,能有效改善原油性质,代谢产物主要为有机酸、醇、气体等。矿场开展调驱 试验12井次,注入井菌浓增加2个数量级,累计增油4269t,表明该菌种适应文明寨油藏条件。     

软测量的工程化设计

将软测量应用到工业生产之前必须解决其工程化设计的问题.为此,在软测量技术理论研究和应用经验的基础上,对软测量工程化设计中应解决的关键问题和解决方法进行了研究.软测量的工程化设计包括机理分析、辅助变量选择、数据采集和预处理、建立软测量模型、设计校正模块等步骤.其关键技术在于软测量过程的数据处理、模型的建立和校正.并以杭州龙山化工厂碳酸化塔中C02浓度软测量的工程化设计为例,对工程化设计中的一些关键问题处理进行介绍.实践表明,软测量的工程化设计在实际工业生产中具有很好的应用性和指导性,但也有待更进一步的研究.     

超稠油生产重交通道路石油沥青工艺探讨

超稠油的密度大、粘度高、轻油收率低、酸值高，沥青组成分布不合理，生产沥青困难。探索合适的超稠油生产沥青的加工工艺，不但可以解决超稠油加工困难问题，而且增加了生产道路沥青产品的原料资源。试验及生产证明，采用调和、预处理-蒸馏等工艺加工超稠油能够生产出合格的重交通道路石油沥青产品。