电荷耦合图像传感器在细线直径测控系统中的应用

文中给出了一个以氟化氪固体激光器做光源，以电荷耦合图像传感器为光屏，应用夫朗禾费衍射原理，实现对细丝直径在线检测自动控制。该方案对相关企业质量控制的自动化是有意义的。     

中国油田堵水技术综述

本文论述了我国油田堵水技术的发展及其在油田开发中的作用,总结和阐述了油井化学堵水技术和注水井吸水剖面调整技术的原理和效益,指明了实践证实的有成效的工艺方法和堵水技术发展方向。     

精铸企业质量控制管理系统

精铸企业的发展迫切要求实现质量管理的现代化。分析了我国精铸企业质量管理的特点，应用国际先进管理思想建立了适合于我国精铸企业的质量控制管理系统，并介绍了其功能和用途。     

High accuracy path tracking for vehicles in presence of sliding: Application to farm vehicle automatic guidance for agricultural tasks

When designing an accurate automated guidance system for vehicles, a major problem is sliding and pseudo-sliding effects. This is especially the case in agricultural applications, where five-centimetre accuracy with respect to the desired trajectory is required, although the vehicles are moving on slippery ground. It has been established that RTK GPS was a very suitable sensor to achieve automated guidance with such high precision: several control laws have been designed for vehicles equipped with this sensor, and provide the expected guidance accuracy as long as the vehicles do not slide. In previous work, further control developments have been proposed to take sliding into account: guidance accuracy in slippery environments has been shown to be preserved, except transiently at the beginning/end of curves. In this paper, the design of this control law is first recalled and discussed. A Model Predictive Control method is then applied in order to preserve accuracy of guidance even during these curvature transitions. Finally, the overall control scheme is implemented, and improvements with respect to previous guidance laws are demonstrated through full-scale experiments.     

Control of Titanium Alloy Thin Plate Welding Distortion by Trailing Peening

The technology of trailing peening is a kind of promisingly bran-new technology which can be used to control weldingstress and distortion of Ti alloy thin plate. Control of TC4 Ti alloy thn plate welding stress and distortion underthe condition of convent     

鹰嘴岩隧道软弱破碎岩体的开挖与施工

渫水皂市水利枢纽左岸上坝公路鹰嘴岩隧道围岩主要为Ⅱ、Ⅲ、Ⅳ、Ⅴ类围岩，地质条件复杂，成洞条件差。在隧道施工中，遵循“短进尺，弱爆破、少扰动、早支护”的原则，及时进行监控量测，采取有效的加固措施，取得了良好效果，确保了工程进度与安全。     

后浇带质量控制的措施

后浇带起着超长建筑的温度伸缩、高层建筑高层部分与裙房间沉降缝的作用,已普遍采用,但有些工程由于施工不当,设了后浇带起不到应有作用,本文就施工中如何采取有效措施,对后浇带的质量进行控制,作了探讨,以期能真正发挥后浇带的作用。     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

二氧化碳与磷化氢混合熏蒸防治储烟害虫试验

目前,储烟害虫防治普遍采用磷化铝片剂常规熏蒸法,磷化铝施用量为6～9g/m3,安全上存在一定的隐患。为了减少磷化铝用药量,于2003年应用微电脑控制的仓外混合熏蒸机,施用钢瓶装液化二氧化碳和56%磷化铝片剂,进行了二氧化碳与磷化氢混合熏蒸杀虫试验,以8g/m3磷化铝常规熏蒸法为对照。试验结果表明,磷化铝施用量为2.3g/m3、二氧化碳施用量为12g/m3,混合熏蒸结果达到100%杀死害虫。与对照相比,杀虫效果相同,混合熏蒸法具有磷化铝施用量较小、较为安全和有利于减少污染等优点。     

原料磨同步机励磁装置的改造

分析原料磨同步机所使用的KGLF型励磁装置在实际运行中存在的问题，介绍采用LZK-3型微机励磁装置的改造实践。