Fatigue in bamboo

This paper describes the results of an experimental programme to determine the fatigue behaviour of bamboo. Bamboo is subjected to cyclic loading, both in the plant itself and subsequently when the material is used in load-bearing applications in the construction industry. However, there is currently no data in the literature describing fatigue in this material. We found that sections of bamboo culm loaded parallel to the culm axis did not undergo fatigue failure: samples either failed on the first loading cycle, or not at all. By contrast, fatigue was readily apparent in samples loaded in compression across the diameter of the culm. The number of cycles to failure increased as the cyclic load range decreased in a manner similar to that found in many engineering materials: fatigue occurred at applied loads as small as 40% of the ultimate strength. Two different species of bamboo were tested and found to have different ultimate strengths but similar high-cycle fatigue strengths. Finite element analysis was used to help understand the progression of fatigue damage and the effect of stress concentration features. Some tentative design rules are proposed to define stress levels for the safe use of bamboo, taking fatigue into account.     

Recent progress of green sorbents-based technologies for low concentration CO2 capture

The increased concentration of CO₂ due to continuous breathing and no discharge of human beings in the manned closed space, like spacecraft and submarines, can be a threat to health and safety. Effective removal of low concentration CO₂ from the manned closed space is essential to meet the requirements of long-term space or deep-sea exploration, which is an international frontier and trend. Ionic liquids (ILs), as a widespread and green solvent, already showed its excellent performance on CO₂ capture and absorption, indicating its potential application in low concentration CO₂ capture. In this review, we first summarized the current methods and strategies for direct capture from low concentration CO₂ in both the atmosphere and manned closed spaces. Then, the multi-scale simulation methods of CO₂ capture by ionic liquids are described in detail, including screening ionic liquids by COSMO-RS methods, capture mechanism by density functional theory and molecular dynamics simulation, and absorption process by computational fluid dynamics simulation. Lastly, some typical IL-based green technologies for low concentration CO₂ capture, such as functionalized ILs, co-solvent systems with ILs, and supported materials based on ILs, are introduced, and analyzed the subtle possibility in manned closed spaces. Finally, we look forward to the technology and development of low concentration CO₂ capture, which can meet the needs of human survival in closed space and proposed that supported materials with ionic liquids have great advantages and infinite possibilities in the vital area.     

Optimization of Gallium concentration to improve the performance of ZnO nanopowders for nanophotonic applications

This study reports the effects of gallium concentration on the properties of doped zinc oxide nanopowders. Both pure and gallium doped zinc oxide (GZO) nanoparticles were prepared via a simple and effective sol-gel method. The structural, morphological and optical properties of synthesized GZO nanopowders were investigated using different characterization methods such as X-ray diffraction, Raman, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer, UV–Vis diffuse reflectance spectroscopy, Transmission electron microscopy, Photoluminescence spectroscopy, X-ray and ion-beam-induced luminescence (IBIL) measurements. Firstly, in the presence of Ga ions in the host the purity of synthesized sample was evaluated by X-ray diffraction analysis. X-ray photoelectron spectroscopy confirmed the presence of bonding states of Zn, O, and Ga on the surface of powders. Raman spectroscopy analysis showed that the increase of Ga content upper than 1 at.% leads to an increase in the number of defects in the ZnO lattice. Field emission scanning electron microscopy (FESEM) confirmed that the uniform integration of spherical and hexagonal rod shape particles can be found in the doped samples. According to FESEM images, the particle size of prepared nanopowders increased from 101 to 200 nm by increasing in the Ga doping concentration. The photoluminescence, X-ray and ion beam induced luminescence results of the pure and doped ZnO powders revealed novel blue-green emission band from 400 up to 550 nm at room temperature. Optical and structural studies confirmed the optimized Ga concentration is 1 at.%.     

高落差粉尘扩散规律和分布特征

高溜井放矿过程中会形成强大的冲击气流引起粉尘扩散，造成严重的井下环境污染，对其进行有效治理一直是井下通风除尘的工作重心，本工作利用相似实验和数值模拟相结合的方式探究溜井放矿过程中粉尘的扩散规律和分布特征。通过改变放矿质量、矿石粒径、溜井密闭程度、含水率等因素测试不同条件下气流大小和粉尘浓度分布，并利用CFD-DPM耦合方法模拟卸矿过程中的气?固两相流，研究气流和粉尘浓度时空分布特征。结果表明，最大粉尘浓度和风速随放矿质量增加而上升，随颗粒粒径和溜井密闭程度增大而降低，且含水率越大，粉尘浓度越小，风速无明显变化，在放矿过程中矿石颗粒之间碰撞占主导作用，颗粒流呈横向分布。     

A Multiscale-Porous Anion Exchange Membrane for Convenient and Scalable Electrokinetic Concentration of Cationic Species

A device able to electrokinetically concentrate cationic samples has many potential medical and industrial applications, but until now has remained undeveloped due to the lack of a commercial anion-permselective material leading to a prohibitively complex fabrication procedure. Herein, a novel multiscale-porous anion exchange membrane (MP-AEM) that enables the convenient and scalable electrokinetic concentration of cationic species is proposed. A mechanically enhanced multiscale-porous structure with a solid framework is realized by adopting polyester resin as an additive to overcome the intrinsic limitations of the AEM material. The scalable MP-AEM-embedded electrokinetic concentrator is devised based on the peculiar properties of the MP-AEM that for allow both ion and fluid transport. With the MP-AEM, the concentrator is fabricated in a highly streamlined manner consisting only of a simple insertion and assembly. The concentration performance of the MP-AEM-embedded electrokinetic concentrator is demonstrated with a positively charged fluorescent dye and a fluorescein-labeled protein, and the results show enrichment factors of 250 and 500, respectively. The MP-AEM makes cationic electrokinetic concentration more accessible and scalable, thereby enabling further progress in a wide range of fields.     

高浓度聚合物驱提高采收率方法实验研究

为探索一种新的提高原油采收率的方法,在外形尺寸为4.5 cm×4.5 cm×30 cm、气测渗透率0.9~1.0μm2、变异系数为0.72的二维纵向非均质人造岩心上,模拟大庆油田油藏流体性质及温度条件,研究了高浓度聚合物(HPAM)驱注入时机、聚合物相对分子质量、聚合物段塞体积及段塞组合对驱油效果的影响。通过注入大分子量、高浓度聚合物,结合合理的注入方式,在化学剂成本与三元复合驱相当的情况下,采收率比水驱提高20个百分点以上,接近或超过三元复合驱的水平。实验表明,采用高浓度聚合物驱油是一种较好的提高原油采收率的方法。     

钻井钢丝绳检测方法与装置的研究

钻井钢丝绳对于钻井平台安全可靠性有直接影响。采用磁性检测方法对钻井钢丝绳进行检测,并对钻井钢丝绳的励磁方式、聚磁方法及传感器与钢丝绳的配合间隙问题进行分析。在此基础上,研制了钻井钢丝绳检测仪器,能够实现对钻井钢丝绳断丝、磨损等缺陷的定性、定量检测,并能够对缺陷进行定位,为钻井钢丝绳的寿命评估提供了依据,对提高钻井平台的安全性具有重要意义。     

磺基琥珀酸双2-丁基辛酯钠盐的合成及表面活性测定

以马来酸酐和2-丁基辛醇为原料,经酯化得到相应的双酯,以乙醇作混相促进剂,使双酯与亚硫酸氢钠进行磺化反应,合成了磺基琥珀酸双2-丁基辛酯钠盐。采用正交试验对酯化反应条件进行了优化。合成产物的临界胶束浓度(cmc)值为3.58×10-6mol/L,表面张力(γcmc)为27.568mN/m。     

弱碱三元复合驱与强碱三元复合驱的对比

三元复合驱即将成为大庆油田的主导开发技术,为了推荐出合适的三元复合驱类型,对比研究了弱碱三元复合驱与强碱三元复合驱。研究表明,弱碱三元复合驱可以比水驱提高采收率20%以上,与强碱三元复合驱相当;弱碱三元复合驱与强碱三元复合驱乳化液粘度都超过100 mPa.s,两种类型三元复合乳化能力相差不多,甚至弱碱三元复合驱乳化能力还略强一些;在注采能力、采油速度方面,弱碱三元复合驱甚至高于强碱三元复合驱;特别是在结垢程度上,弱碱三元复合驱比强碱三元复合驱弱,对生产井的影响较小。因此,在三元复合驱推广应用时应当选用弱碱三元复合驱。     

双转向垂向控缝技术实验研究及现场应用

针对压裂过程中缝高较难控制的问题，研制开发出新型的油溶性垂向双转向剂，并开展了室内实验研究。首次验证了转向剂对裂缝延伸的控制机理，确定了转向剂的适用浓度及控缝能力。实验表明，转向剂可以增加隔层应力3～4MPa左右。在此基础上研究了控制裂缝高度施工方案的设计方法，并利用全三维软件结合垂向应力剖面对控缝技术进行了优化。现场推广应用30井次，取得了较好的控缝效果。