三聚氰胺改性脲醛树脂粉体胶粘剂的研制

用三聚氰胺改性脲醛树脂改善了胶粘剂的耐沸水性,并有效地降低了游离甲醛含量。三聚氰胺改性脲醛树脂粉体胶粘剂应用更广泛,性能更可靠。     

SBS改性沥青

介绍了沥青的特性，改性沥青的种类与性能，以及丁苯嵌段共聚物改性沥青的相容性，溶胀性，分散性等方面的研究进展，并提出了发展建议。     

明胶复合Co-Fe-O体纳米微粉的合成和特性

用微乳液法制备了明胶复合的纳米Co Fe O体。将明胶和亚铁盐以及钴盐制成凝胶,使该凝胶状反应物在微乳液的胶束中反应,再被还原-化合-成核长大。用XRD、TEM、SEM、EDS、IR等测试表明:微粉为明胶包裹的球形纳米微球。生成的微粒处于明胶蛋白分子的包裹之中,单个微粒的粒径3 3～4 6nm,每个复合微球中约有3～22个Co Fe O体粒子组成,微球的平均粒径为10～100nm,Co-Fe-O体复合微粉的比饱和磁化强度σs=1 532kAm-1·g-1;矫顽力Hc=18 4kAm-1;剩磁σr=322 5Am-1·g-1。     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

110 dtex/36f抗菌POY纺丝工艺研究

讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。指出预结晶温度为160℃,干燥温度为145℃时,干燥效果较好。螺杆各区温度比常规纺丝时低10℃,纺丝顺利。侧吹风速0.37m/s,风温25℃,风湿75%,丝条稳定;上油率达0.9%时,集束性较好。此抗菌纤维抑菌率达99.99%以上。     

Direct ethoxylation of fatty methyl ester over Al-Mg composite oxide catalyst

For the purpose of estimating the reaction mechanism of the direct ethoxylation of a fatty ester in the presence of an Al-Mg composite oxide catalyst, a labeled fatty methyl ester C₁₁H₂₃CO¹⁸OCH₃ containing ¹⁸O isotope was synthesized and directly ethoxylated. The product was evaluated by gas chromatography-mass spectrometry (GC-MS). The GC-MS spectra showed that the ¹⁸O isotope label was present only in the methoxy group at the molecular end of the ethoxylated fatty methyl ester. This supports the reaction mechanism of coordination anionic polymerization where the bond between the acyl and methoxy groups of the fatty methyl ester molecule was broken, caused by the bifunctional effect of the acid-base active sites; an intermediate chemisorption species was formed; and then ethylene oxide was addition-polymerized sequentially, in parallel.     

三维电极电解阴离子表面活性剂废水的研究

采用三维电极电解法对含阴离子表面活性剂（LAS）废水的处理进行了研究，考察了不同电极组合、槽电压、停留时间、电极间距及废水的pH值对降解效果的影响，并对电解机理作了初步探讨.实验表明：LAS废水处理的最佳工艺为：极间距2cm，槽压为8V，电解时间为40min.LAS、COD、TOC的去除率分别在94.5%、66.2%和58.7%以上.电极材料对去除率有很大影响.     

有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。     

高强度快干变性淀粉粘合剂的研究及在纸制品包装中的应用

本文介绍了高强度快干变性淀粉的制备原理和工艺,以及用该变性淀粉调配瓦楞纸板用粘合剂的方法和应用情况。讨论了变性淀粉粘合剂的初粘力,干燥速度等并与普通淀粉粘合剂作了比较。     

改性聚丙烯酰胺水溶液的疏水缔合性质

合成了一种疏水缔合水溶性聚丙烯酰胺共聚物，使用荧光光谱法并结合紫外及流变性实验，对制备的疏水缔合水溶性聚丙烯酰胺共聚物在水溶液中形成疏水微区、超分子聚集体及空间网络结构进行了研究，并用扫描电子显微镜证实了溶液中网络结构的存在．