Effects of Working Fluid,Tubeside Enhancement and Bundle Depth on the Optimized Fin Geometry of a Horizontal Condenser Tube

A theoretical study has been made to optimize the fin geometry of a horizontal finned tube which is to be usedfor condensers that handle the vapor load of a liquid phase change cooling module.Systematic numerical calcu-lations of the vapor to coolant heat transfer have been performed for parametric values of fin height,fin spacing,vertical bundle depth and tubeside heat transfer coefficient.Three dielectric fluids (R-113,FC-72,and FC-87)at atmospheric pressure were selected as the working fluids.For a single tube with optimized fin geometry,theaverage heat flux increased in the order of FC-87,R-113 and FC-72.Both the optimum fin height and optimumfin spacing increased with increasing vertical bundle depth.     

Dynamics of Balancing Space and Time in Memory: Tau and Kappa Effects Revisited.

In 3 experiments, the authors studied the organization of spatiotemporal information in memory. Stimuli consisted of configurations of dots, presented sequentially. The stimuli were either proportional, with interdot distances corresponding to interdot durations, or not proportional, with interdol distances not corresponding to interdot durations. After a learning phase, participants reproduced the spatial (Experiment 1), temporal (Experiment 2), or spatial and temporal (Experiment 3) characteristics of the target 60 times in succession. In the nonproportional conditions, effects of variable interdot durations or distances on the reproduction of, respectively, constant distances (tau effect) or durations (kappa effect) were observed, whereas no such effects were observed when variable distances or durations were to be produced. Tau and kappa effects influenced the accuracy but not the variability of responses. The results are discussed in light of the distinction between properties of the stabilized mental image and the process of stabilization. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.     

低k氟化非晶碳层间介质对芯片性能的影响

讨论了通过合理设计的工艺流程将低k氟化非晶碳材料应用到制造工艺中作为互连介质对集成电路性能的影响。基于一个互连结构简化模型计算出采用低k氟化非晶碳材料作为互连介质后RC延迟、功率耗散和线间串扰的变化情况。采用低k氟化非晶碳介质后,RC延迟和功率耗散随着互连长度的增大而减小,线间串扰也得到显著抑制。     

Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films

An optical nondestructive strain measurement technique was performed to analyze the mechanical deformation induced by an electrical field within the insulating materials. Poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films were then subjected to constant electrical fields right up to their electrical breakdown. The experimental technique made it possible to follow the various stages of the mechanical behavior of PEN in real time. The final breakdown occurred in the observation zone and the related mechanical deformation was captured. A “margarita” structure was observed with a hole at the center. The experimental results indicated that the level of the induced‐mechanical deformations depended on the local environment. We defined two different zones representing the inside and the outside of the damaged area. The induced‐deformations were larger in the damaged zone. It was also observed that deformations increased when the sample had a lower degree of crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Local dynamics in epoxy coatings containing iron oxide nanoparticles by dielectric relaxation spectroscopy

Nanocomposites of photocurable epoxy resin and epoxy‐modified iron oxide magnetic nanoparticles were analyzed by dielectric relaxation spectroscopy to study the local dynamics at temperatures well below the glass‐transition temperature. Two secondary processes were detected, β and γ processes, but the second one was just detected at lower temperatures in the high‐frequency part of the spectra and moved out of the frequency range at higher temperatures. Data were fitted to the Havriliak–Negami and Arrhenius models, and the obtained parameters were analyzed. Relaxation times of the β secondary relaxation did not change with the nanoparticle content, but the relaxation strength increased. The increase could not be explained when we took into account the molecular origin of the relaxation. The presence of ferromagnetic nanoparticles enhanced the internal field and increased the relaxation strengths. Transmission electron microscopy images showed that the nanoparticles were well dispersed in the matrix, without magnetic agglomerates. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

D_2EHDTPA萃取铟的热力学研究

报道了用二 (2 乙基己基 )二硫代磷酸为萃取剂 ,以正庚烷为稀释剂萃取铟的热力学研究。在In2 (SO4 ) 3+Na2 SO4 +D2 EHDTPA +n C7H1 6 +H2 O体系中 ,在温度 2 78.15～ 3 0 3 .15K和离子强度 0 .1～ 2 .0mol·kg- 1 范围内 ,以Na2 SO4 为支持电解质 ,测定了萃取平衡水相中In3+浓度和pH值。计算了萃取反应的标准平衡常数K0 ,并得到经验公式logK0 =43 .93 -5 3 68.5 4 T -0 .0 699T ,同时计算了萃取反应的其他热力学量 ,并指出了焓和熵都是此萃取过程的推动力     

中铝山西分公司供水系统的节能措施

本简要介绍了中铝山西分公司供水系统中采取的节能措施和取得的经济效益。     

变频调速器在桥式抓斗吊车中的应用

论文主要介绍了电机的调速方法、变频器的工作原理以及日本FRNIC500G7型变频器在桥式抓斗吊车上的应用，并分析了使用绕线式电机调速与鼠笼式电机变频调速之间的优缺点。     

地面驱动螺杆泵恒液面控制方法

恒液面控制有利于提高泵效,降低抽油杆柱和泵等设备的失效率。为此结合地面控制装置,研究了一种控制方法和软件。该软件根据控制装置实时测量的转速、扭矩等参数并结合地层开采能力、杆泵型号等参数,分析计算出液面高度和控制范围,并计算出转速改变量,由控制装置实行闭环控制。经大庆油田5口井试验表明,液面高度误差均在50 m内,实现了螺杆泵恒液面控制目的。