润滑油抗氧剂的作用机理

简介了润滑油使用过程中导致其氧化的影响因素和所形成氧化物对使用性能的影响，以及润滑油基础油的氧化机理，叙述了酚类、胺类、有机铜盐、有机硫、烷基硫代氨基甲酸盐、有机磷、硫代苯并三氮唑、硒化物抗氧剂的抗氧化作用机理。     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

柴油助燃剂的开发方向

本文系统地介绍了各种柴油助燃剂。采用这些助燃剂可以提高柴油发动机和柴油燃烧器燃料完全燃烧程度，从而达到节能和保护环境的目的。     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

红外化学遥感数字信号处理算法的研究进展

介绍了几种为远距离红外蒸汽信号监测开发的分类器设计，频域数字滤波，时域数字滤波等数字信号处理技术。对线性分类器，分段线性分类器和神经网络分类器等在红外化学遥感系统中的应用做了初步的探讨。对背景扣除技术，频域数字滤波技术，数字滤波的切趾方法等做了简要的描述。阐述了时域滤波技术的基本原理及实际应用。展望了红外化学遥感数字信号处理算法的研究前景。     

长25-29井卡钻事故的处理

长２５－２９井在完井阶段通井过程中发生粘附卡钻事故，在处理卡钻过程中又发生卡套铣筒、井漏、溢流等事故及复杂情况。通过对井下情况的认真分析，采取先堵漏后循环再解卡的处理方案，顺利地解除了该次卡钻事故，大大地减少了经济损失。     

低银医用X光胶片的研制

对几种增黑剂进行了筛选实验研究，选用了两种增黑剂组合使用，提高了遮盖力，使医用Ｘ光胶片涂布银量由原业的９ｇ／ｍ２降到了６．８ｇ／ｍ２，与美国医用Ｘ光胶片涂布银量（６．７ｇ／ｍ２）相当，照相性能不低于国产医用Ｘ光胶片。     

�ø������ռ�ͬʱ�ѳ���Ȼ���е������ˮ

本文介绍了采用复合吸收剂净化天然气的试验结果,在现有三甘醇等脱水剂中添加单乙醇胺,在脱水的同时脱除H_2S,在保证净化气露点低于-21℃的条件下,使净化气中H_2S含量亦低于5mg/m～3。     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

乳化炸药的高温化学发泡

文中在阐述ＮＨ４ＮＯ３－ＮａＮＯ２－Ｈ２Ｏ发泡体系的发泡机制的基础上，推导出了就获得较低的反应速率ｒＲ和气体生成量ｎ的高ｐＨ值对高温的平衡关系，从而提出了高温发泡技术。