DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

树脂悬浮光度法测定微量银

在ｐＨ６．９的缓冲溶液中，银与硫代米Ｃｈｉ酮（ＴＭＫ）形成的螯合物在树脂甘油相中悬浮富集，用光度法测定银在波长４６１ｎｍ处有最大吸收，银在０～６μｇ／１０ｍＬ范围内遵守比尔定律，可用于样品中微量银的测定。     

含碳冷固结团矿还原性测定方法探讨

含碳冷固结团矿与天然铁矿石、烧结矿、氧化球团矿不同、其还原性不能用减量法直接测定，需要根据还原后试样的化学成分计算获得，或根据试样中碳量的变化和试样的减量计算获得，但还原速率指数无法得到，本文以沙城铁厂试样为例进行了说明。     

Standard reference materials for cements

The eight portland cements and two calcium aluminate cements in the Standard Reference Material (SRM) 1880 series are among the most popular SRMs in the catalog of the National Institute of Standards and Technology (NIST) Standard Reference Materials Program. Numerous laboratories rely on them for elemental analysis and qualification for ASTM C 114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement. NIST has collected new candidate materials from around the world and partnered with Construction Technology Laboratories (CTL) in their preparation and certification. This paper describes the procedures taken at NIST and CTL to prepare and test materials for certification including the homogeneity testing, the X-ray fluorescence methods and the statistical data analysis performed for value assignment.     

高效液相色谱法测定头孢拉定制剂方法的改进

目的:改进头孢拉定制剂含量测定方法。方法:高效液相色谱条件:以Shim—Pack CLC—ODS(250mm×4.6mm)为色谱柱;柱温为35℃;流动相为水—甲醇—3.86％醋酸钠溶液-4％醋酸溶液(1364:500:30:6);流速为0.8mL·min~(-1);检测波长为254nm。结果:头孢拉定峰形良好,分离度和柱效满足药典要求,保留时间由原来的21.32min缩短至8.06min,提高了分析速度,含量测定结果与中国药典无显著差异。结论:该方法快速、准确、能更好地适用于常规检验工作和大批量生产时的质量控制。     

热解样品分析中重量的变化及其影响

热解除油是目前室内岩心分析中样品除油的主要方法之一，但由于热解温度较高，会对样品中粘土矿物的结构水和层间水产生较大的影响。本文结合粘土矿物的吸水特性，通过对大量的实验测定结果分析后认为：经过热解处理后的样品，在测定过程中受粘土矿物（主要是伊利石和蒙脱石）层间水变化的影响，会引起样品重量及样品孔隙空间体积的变化，从而对物性分析中孔隙度测定结果产生较大的影响。     

煤矿矿井水检测质量控制措施探讨

探讨了影响煤矿矿井水检测质量的主要因素,按照全过程、全要素控制的理念提出了检测前、检测中和检测后的控制措施。     

New method for measuring an optical property of a sample treated by FWA

In this article, a new method for measuring a total spectral radiance factor of a FWA‐treated sample illuminated by a specific standard illuminant is introduced. The method replaces an unstable real fluorescent standard by a bi‐spectral luminescent radiance factor data, which works as a virtual fluorescent standard (VFS) by knowing spectral intensity distributions of illuminations applied to the sample. The method utilizes two illuminations I₁ and I₂ whose relative spectral intensity distributions are different from each other and synthesizes a virtual illumination presenting the identical fluorescent spectral radiance factor to that presented by the standard illuminant with the VFS of the specific bi‐spectral luminescent radiance factor by linearly combining I₁ and I₂ with the suitable weighting factors. The applicability of the method is examined in principle by comparing ISO brightness and CIE whiteness index of fluorescent standard paper as a test sample obtained by this new method to the assigned values. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 195–200, 2007