碳纳米管对智能凝胶性能影响的研究

利用碳纳米管（CNTs）超强的力学性能将碳纳米管引入聚丙烯酸（PAA）凝胶网络中，制备出新型含碳纳米管的聚丙烯酸凝胶．实验证明其并不改变凝胶原有的离子响应性和pH响应性；力学强度测试表明，其与普通PAA凝胶相比机械性能明显提高．     

A Novel Drug Delivery System for Osteosarcoma Chemotherapy

1Introduction Osteosarcoma,35%ofhumanprimarybonecan cers,ishighlymalignantandtendstotransferandgrow permeantly.Chemotherapyisaneffectiveandbasicthera pyforosteosarcoma,buttheside effectofantineoplasticdrugslimitstheconcentrationofthemwhichinfluences thecu…     

溶胶法原位复合聚乙烯醇/羟基磷灰石水凝胶的结构与性能研究

研究了制备聚乙烯醇(PVA)/羟基磷灰石(HA)复合水凝胶的溶胶法原位复合技术,将无机纳米粉体的溶胶-凝胶合成反应引入高分子基体。对该法制备的复合水凝胶的相结构、微观形貌和拉伸强度进行了分析,并与物理共混法复合水凝胶加以比较。结果表明,溶胶法原位复合可以在富水基体中制备晶相的HA粉体,且粉体粒径小于200nm,分散良好,复合材料的力学性能也有进一步改善。     

聚氨酯基pH/温度敏感性水凝胶的结构形态

通过阴离子型端丙烯酸酯基聚氨酯(UAA)与N-异丙基丙烯酰胺(NIPAAm)的共聚交联反应,制备了pH/温度敏感性水凝胶,分析了水凝胶的结构形态及溶胀水的状态.结果表明,凝胶相结构均匀,随聚氨酯含量的降低,凝胶的骨架变得松散,并且孔道结构增大,导致溶胀凝胶中不可冻结水含量及凝胶强度的降低.     

HEMA共聚物水凝胶中水的存在状态

用过氧化二苯甲酰(BPO)作为引发剂，合成了N-乙烯基吡咯烷酮(NVP)／甲基丙烯酸β-羟乙酯(HEMA)和NVP/HEMA／甲基丙烯酸甲酯(MMA)共聚物水凝胶，用差热扫描量热法(DSC)和热重法(TG)对这些亲水凝胶中吸附水的状态进行了研究．结果表明，水凝胶中水的状态大致可分为自由水、可冻结的结合水和非冻结的结合水．不同用量的MMA与NVP和HEMA共聚，溶胀度不同，其吸附水中不同状态水的含量也有所差异，结果表明，随着MMA含量的增加，水凝胶中非冻结结合水的含量也增加。     

粒状温敏性PNIPA水凝胶的制备

为得到颗粒型温敏性水凝胶,采用N-异丙基丙烯酰胺(N-isopropylacrylamide,NIPA)的反相悬浮聚合方法.根据电导率的变化考察聚合体系的稳定性,并系统地研究了合成工艺对凝胶粒子粒径和形态的影响.实验证明,运用反相悬浮聚合可以制得粒径为40～370 μm的粒状PNIPA温敏性水凝胶.研究发现单体配方、分散剂用量和搅拌速度对产物粒子的大小、粒径分布和形态影响较大,共单体丙烯酸钠的引入能改变凝胶粒子的形态.从凝胶粒子粒径分布和形态,可见NIPA物系的反相悬浮聚合反应主要在水相液滴中进行.     

硅水凝胶隐形眼镜材料的合成与性能研究

以甲基丙烯酸羟乙酯（HEMA）、N-乙烯基毗咯烷酮（NVP）和γ-（甲基丙烯酰氧）丙基三甲氧基硅烷（KH-570）为单体,以偶氮二异丁腈（AIBN）为引发剂,通过本体聚合反应合成新型硅水凝胶角膜接触镜.考察了各单体配比、反应温度等对聚合的影响.结果表明,当反应温度为90℃,反应时间为2h,V（HEMA）：V（NVP）：V（KH-570） =8∶ 1∶1时,合成的隐形眼镜透氧量（DK/t）达到64.0×10-9（cm3O2·cm）/（cm2·s·mmHg）,含水量38％,透光率95.5％以上.     

Sol-gel synthesis of ternary conducting polymer hydrogel for application in all-solid-state flexible supercapacitor

In this contribution, we reported the preparation of a novel conducting polymer hydrogel (CPH) by a sol-gel method, which was subsequently employed to fabricate a flexible all-solid-state supercapacitor device. Taking advantage of the synergistic effects of the different components in the conducting polymer hydrogel and the merits of the proposed synthesis strategies, the prepared supercapacitor device with CPH as electrode exhibited high area-normalized capacitance (2.2 F cm⁻²), high gravimetric capacitance (1573.6 F g⁻¹) as well as high energy density of 0.18 mWh cm⁻² (or 128.7 Wh Kg⁻¹) at 0.08  mW cm⁻² (or 55.1 W kg⁻¹). This study did not only represent a novel all-solid-state, high performance, flexible supercapacitor with potential applications in flexible energy-related devices, but also developed a new method for enhancing capacitances and mechanical stability of all-solid-state flexible supercapacitor.     

Carboxymethyl sago pulp/chitosan hydrogel as an immobilization medium for activated sludge for p-nitrophenol biodegradation

In this study, carboxymethyl sago pulp (CMSP) derived from sago waste was successfully crosslinked with ferric ions in the presence of chitosan forming a novel immobilization matrix for p-nitrophenol (PNP)-acclimated activated sludge. On the basis of the shortest biodegradation time of PNP, the optimized operational conditions of immobilization were found to be: 7 w/v% CMSP, 9 g L⁻¹ of activated sludge, 0.1 M ferric ion, and 15 min of crosslinking time. Observable inhibited PNP biodegradation was exhibited by the suspended activated sludge at the initial PNP concentration of 400 mg L⁻¹. In contrast, complete mineralization was achieved by the CMSP/chitosan-immobilized activated sludge (CMSP/Ch-AS) beads. The results revealed the important role of CMSP/Ch hydrogel in protecting activated sludge from the toxicity of PNP. The CMSP/Ch-AS beads could be reused consecutively up to three and two cycles, respectively, for the biodegradation of PNP at 200 and 400 mg L⁻¹, with the attainment of more than 99% of PNP removal at each cycle. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47531.     

Synthesis and Characterization Superabsorbent Polymers Made of Starch,Acrylic Acid,Acrylamide, Poly(Vinyl Alcohol), 2-Hydroxyethyl Methacrylate, 2-Acrylamido-2-methylpropane Sulfonic Acid

Three polymers with excellent absorption properties were synthesized by graft polymerization: soluble starch-g-poly(acrylic acid-co-2-hydroxyethyl methacrylate), poly(vinyl alcohol)/potato starch-g-poly(acrylic acid-co-acrylamide), poly(vinyl alcohol)/potato starch-g-poly(acrylic acid-co-acrylamide-co-2-acrylamido-2-methylpropane sulfonic acid). Ammonium persulfate and potassium persulfate were used as initiators, while N,N′-methylenebisacrylamide was used as the crosslinking agent. The molecular structure of potato and soluble starch grafted by synthetic polymers was characterized by means of Fourier Transform Infrared Spectroscopy (FTIR). The morphology of the resulting materials was studied using a scanning electron microscope (SEM). Thermal stability was tested by thermogravimetric measurements. The absorption properties of the obtained biopolymers were tested in deionized water, sodium chroma solutions of various concentrations and in buffer solutions of various pH.