Studies on high density polyethylene (HDPE) functionalized by ultraviolet irradiation and its application

The structure and properties of high density polyethylene (HDPE) functionalized by ultraviolet irradiation at different light intensities in air were studied by electron analysis, FTIR spectroscopy, contact angle with water, differential scanning calorimetry and mechanical properties measurement. The results show that oxygen‐containing groups such as C?O, C—O and C(?O)O were introduced onto the molecular chain of HDPE following irradiation, and the rate and efficiency of HDPE functionalization increased with enhancement of irradiation intensity. After irradiation, the melting temperature, contact angle with water and notched impact strength of HDPE decreased, the degree of crystallinity increased, and their variation amplitude increased with irradiation intensity. Compared with HDPE, the yield strength of HDPE irradiated at lower light intensity (32 W m^?2 and 45 W m^?2) increases monotonically with irradiation time, and the yield strength of HDPE irradiated at higher light intensity (78 W m^?2) increases up to 48 h and then decreased with further increase in irradiation time. The irradiated HDPE behaved as a compatibilizer in HDPE/polycarbonate (PC) blends, and the interface bonding between HDPE and PC was ameliorated. After adding 20 wt% HDPE irradiated at 78 W m^?2 irradiation intensity for 24 h to HDPE/PC blends, the tensile yield strength and notched Izod impact strength of the blend were increased from 26.3 MPa and 51 J m^?1 to 30.2 MPa and 158 J m^?1, respectively. Copyright © 2003 Society of Chemical Industry     

Poly(vinyl pyrrolidone)—C70 complexes in aqueous solutions

Aqueous solutions of poly(vinyl pyrrolidone)-fullerene complexes (PVP-C₇₀) have been studied using static and dynamic light scattering methods. Two diffusive processes were detected. The slow diffusion was interpreted as dynamics of large intermolecular PVP-C₇₀ complexes while the fast diffusion was associated with the presence of individual PVP molecules in solution. It was also shown that the molecular weights and dimensions of PVP-C₇₀ complexes are smaller than for PVP-C₆₀ by a factor of 2.5-3. In aqueous solutions of PVP-C₇₀ complex the depolarization and dissymmetry of scattered light were observed in contrast to PVP-C₆₀ solutions. It reveals the existence of anisotropic structures in PVP-C₇₀ solutions. Intermolecular interactions within PVP-C₇₀ complexes are weak and a hydrodynamic field can destroy complexes.     

对重油催化裂化反应历程的若干再认识——"新型多区协控重油催化裂化技术MZCC"的提出

基于对重油催化裂化反应历程的若干再认识,以高油剂混合能量短接触时间催化裂化为工艺基础,提出了进料强返混、反应平流推进、产物超快分离及化学汽提的分区协同控制新理念和实现分区协同控制反应的新技术.并且为实现高油剂混合能量短接触时间催化裂化提出了新型反应器结构;同时对汽提段的功能进行了拓展与强化,提出了"化学汽提器"的概念.分区协同控制反应的技术以进一步提高轻质油收率和实现装置长周期运行为目标,有着重要的理论和实际意义.     

水利项目评价指标赋权模型的建立及其应用

提出了用于水利项目方案评价的方法——基于相对最优方案的指标赋权模型,介绍了该方法的基本原理,建立了综合考虑保证出力、年发电量、单位千瓦投资等因素的基于相对最佳方案的指标赋权模型,并用实例加以说明,与模糊优选神经网络模型的评价结果相对比,研究表明该模型适合于水利项目方案的评价和优选。     

Platinum Binuclear Complexes as Phosphorescent Dopants for Monochromatic and White Organic Light‐Emitting Diodes

Efficient blue‐, green‐, and red‐light‐emitting organic diodes are fabricated using binuclear platinum complexes as phosphorescent dopants. The series of complexes used here have pyrazolate bridging ligands and the general formula C^∧NPt(μ‐pz)₂PtC^∧N (where C^∧N = 2‐(4′,6′‐difluorophenyl)pyridinato‐N,C^2′, pz = pyrazole ( 1 ), 3‐methyl‐5‐tert‐butylpyrazole ( 2 ), and 3,5‐bis(tert‐butyl)pyrazole ( 3 )). The Pt–Pt distance in the complexes, which decreases in the order 1 > 2 > 3 , solely determines the electroluminescence color of the organic light‐emitting diodes (OLEDs). Blue OLEDs fabricated using 8 % 1 doped into a 3,5‐bis(N‐carbazolyl)benzene (mCP) host have a quantum efficiency of 4.3 % at 120 Cd m^–2, a brightness of 3900 Cd m^–2 at 12 V, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.11, 0.24). Green and red OLEDs fabricated with 2 and 3 , respectively, also give high quantum efficiencies (～ 6.7 %), with CIE coordinates of (0.31, 0.63) and (0.59, 0.46), respectively. The current‐density–voltage characteristics of devices made using dopants 2 and 3 indicate that hole trapping is enhanced by short Pt–Pt distances (< 3.1 Å). Blue electrophosphorescence is achieved by taking advantage of the binuclear molecular geometry in order to suppress dopant intermolecular interactions. No evidence of low‐energy emission from aggregate states is observed in OLEDs made with 50 % 1 doped into mCP. OLEDs made using 100 % 1 as an emissive layer display red luminescence, which is believed to originate from distorted complexes with compressed Pt–Pt separations located in defect sites within the neat film. White OLEDs are fabricated using 1 and 3 in three different device architectures, either with one or two dopants in dual emissive layers or both dopants in a single emissive layer. All the white OLEDs have high quantum efficiency (～ 5 %) and brightness (～ 600 Cd m^–2 at 10 V).     

Determination of molecular weight and molecular sizes of polymers by high temperature gel permeation chromatography with a static and dynamic laser light scattering detector

Flow-mode static and dynamic laser light scattering (SLS/DLS) studies of polymers, including polystyrene, polyethylene, polypropylene and poly(dimethylsiloxane) (PDMS), in 1,2,4-trichlorobenzene (TCB) at 150 °C were performed on a high temperature gel permeation chromatography (GPC) coupled with a SLS/DLS detector. Both absolute molecular weight (M) and molecular sizes (radius of gyration, R_g and hydrodynamic radius, R_h) of polymers eluting from the GPC columns were obtained simultaneously. The conformation of different polymers in TCB at 150 °C were discussed according to the scaling relationships between R_g, R_h and M and the ρ-ratio (ρ=R_g/R_h). Flow-mode DLS results of PDMS were verified by batch-mode DLS study of the same sample. The presented technique was proved to be a convenient and quick method to study the shape and conformation of polymers in solution at high temperature. However, the flow-mode DLS was only applicable for high molecular weight polymers with a higher refractive index increment such as PDMS.     

光传送网中的关键光器件

光器件是光传送网的基础单元之一，本主要综述光传送网中的关键光器件：光源与光探测器、光波分复用/解复用器、光放大器、色度色散与偏振模补偿器及光开关等。比较了各种光器件的主要技术方案，特别针对的是已实用化的技术方案。最后讨论了光器件的尺寸小型化、微型化以及多功能集成等发展趋势，介绍了光器件的集成方式如：传统分立光器件的集成，平面光波导集成，以及混合集成等。     

Occupational Factors and 5-Year Weight Change Among Men in a Danish National Cohort.

This study explored whether factors related to the work environment could predict changes in body mass index (BMI) and whether the effect of psychosocial factors was dependent on baseline BMI. The sample consisted of 1,980 male employees from the Danish National Work Environment Cohort Study. Changes in BMI between 1995 and 2000 were analyzed, by multiple regression, as a function of background variables and a series of occupational variables obtained in 1995. Age, baseline BMI, job insecurity, and psychological demands predicted changes in BMI. Job insecurity and high or low psychological demands increased the likelihood of weight gain among obese employees, whereas they increased the likelihood of weight loss among employees with a low BMI. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

单片LCoS光学引擎中彩色LED照明系统设计

LCoS光学引擎作为整个背投的一个要组成部分，其照明系统显著地影响着LCoS背投的性能。详细分析了影响照明效果的各个因素，并利用ZEMAX软件设计出了单片LCoS光学引擎中基于彩色LED光源的照明系统，该系统能达到较好的亮度和均匀性，满足整个光机系统的成像要求。     

新型微光探测器激光防护材料的研究

系统分析了微光夜视器的结构及其原理，并结合当前器件存在的激光致盲威胁，提出了增强系统安全的新措施。同时，系统地介绍了防激光滤光材料一些重要的性能参数以及滤光材料的组成、制备加工工艺。研究结果表明，新型的防激光材料能够有效地防护800nm，900nm以及10613nm等三个波长的激光，并且可见光透过率大于85％。