Structure and properties of regenerated cellulose films coated with polyurethane–nitrolignin graft‐IPNs coating

A regenerated cellulose film (RC) was coated with a graft‐IPNs coating, which was composed of castor oil‐based polyurethane and 2.8 wt % nitrolignin (NL), to obtain water‐resistant films. The effects of NCO/OH molar ratio and different polyols, such as 1,4‐butanediol (BDO) and trimethanol propane (TMP), on the structure and properties of the coated RC films were investigated. With an increase of the NCO/OH molar ratio, the tensile strength of the coated films increased, but the water resistivity and size contraction hardly changed. The coated films with TMP exhibited the higher breaking elongation at 1.5 of the NCO/OH molar ratio, while those with BDO have more excellent tensile strength, water resistivity, and dimensional stability. The coated films with the graft‐IPNs coating exhibited superior water resistivity and dimensional stability. The light transmittance of the coated films was more excellent than that of the RC film. Moreover, the results from the IR and electron probe microanalysis (EPMA) showed that the chemical bonding occurred between cellulose and coating, and the introduction of NL plays an important role in the enhancement of the interface adhesion of the coated films. Atomic force microscopy (AFM) depicted the flat and dense surface of the coated films, which restricted the water vapor penetration and the size contraction, resulting in the enhancement of water resistivity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1799–1806, 2002     

羧甲基纤维素阳离子化衍生物的研究现状

羧甲基纤维素阳离子化改性是制备性能优良的天然两性高分子的重要方法之一。文章综述了迄今为止羧甲基纤维素阳离子化改性所用的阳离子单体的主要类型及其接枝的若干主要途径,其中包括自由基型接枝共聚、高分子侧基反应、聚合后功能化等三大类。     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

纳米二氧化钛制备方法研究

目前制备纳米二氧化钛粒子的方法很多,在总结归纳的基础上对各种制备方法所具有的特点进行比较,并指出了其优缺点和适用范围以及相关的研究进展.     

CaCO3/natural rubber latex nanometer composite and its properties

Calcium carbonate/natural rubber (NR) latex nanometer composites were prepared by adding nanometer CaCO₃ whose surface had been treated to natural rubber latex (NRL) before sulfuration. The physical, thermooxidative aging, and thermal degradation properties and the ultra‐microstructure were analyzed with a multipurpose material testing meter, a thermal analysis meter and a Philips XL‐30 SEM, respectively. The results showed that the structures and properties of nanometer composites could be clearly improved by NRL mixed with surface‐treated nanometer CaCO₃. The physical properties of the nanometer composites were best when the content of surface treatment agent was 2.5% (to nanometer CaCO₃), the nanometer CaCO₃/NRL content was 3:100, and the stirring time for treating the surface of the nanometer CaCO₃ was 20 min. Simultaneously, the thermooxidative aging resistance of the nanometer composites also was significantly improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3442–3447, 2006     

纳米陶瓷热喷涂若干问题的试验研究

就制备Al2O3-3TiO2纳米陶瓷涂层的热喷涂系统热源，焰流速度和纳米陶瓷棒进行了试验研究，提出了采用低温、高速、强力、纳米陶瓷棒制备纳米陶瓷涂层的热喷涂工艺。     

纳米二氧化钛在防晒化妆品中的应用

从纳米二氧化钛的防晒机理出发,叙述了纳米二氧化钛优越的防晒性能及应用前景,分析了纳米二氧化钛在应用于防晒化妆品时应注意的问题,较为全面地反映出纳米二氧化钛在防晒化妆品中的应用研究情况。     

纳米碳酸钙的表面活化改性研究

本文主要介绍通过加入特定的表面改性剂,制得了表面改性的活性碳酸钙.并对活化过程中的一系列影响因素,如活化温度、活化时间、碳酸钙悬浊液浓度、表面改性剂用量进行了研究.     

尿素嵌入法制备纤维素氨基甲酸酯的研究

探讨了尿素嵌入法制备纤维素氨基甲酸酯(CC)的生产工艺。指出:选用聚合度为450~625、α-纤维素含量大于90/的纤维素浆粕,用14/~16/的氢氧化钠溶液,于40~50℃条件下活化处理30~40min后,与尿素以1∶2~3的比例混合,在137℃的二甲苯体系中反应2~3h,便可得到含氮量为2.4/~3.5/的纤维素氨基甲酸酯产物。该产物在氢氧化钠溶液中可形成良好的稳定溶液,过滤性好,可直接用于纺丝。     

纤维素衍生化手性固定相的制备和对噻吗洛尔拆分

用超声方法合成了三(3,5-二硝基苯甲酰基)纤维素(CTNB)、三(4-溴苯甲酰基)纤维素(CTBB)、三(苯甲酰基)纤维素(CTB)、三(4-甲基苯甲酰基)纤维素(CTMB)、三(4-硝基苯甲酰基)纤维素(CTPB).将此类衍生化纤维素作为薄层色谱的手性固定相,结合展开剂的优化,对噻吗洛尔对映体进行拆分研究,并对衍生化取代基对拆分效果的影响以及对映体在手性固定相上的拆分机理进行了详细的探讨.