电源设备的功率因数校正技术

功率因数校正(PFC)技术能提高电源设备的电源利用率，减少谐波。文中介绍了功率因数的定义，功率因数校正技术及其应用实例。     

基于AutoCAD2000的图解法确定工艺转角

提出了基于AutoCAD2 0 0 0的图解法求解机械加工过程中工艺转角的问题 ,并针对具体的应用实例给出了圆满的解答 ,并验证了其精度。     

Review of Le choc de l'informatique: Les répercussions psychosociales et le r?le des attitudes.

Reviews the book, ILe choc de l'informatique: Les répercussions psychosociales et le r?le des attitudes by Serge Guimond and Guy Bégin (1987). This monograph is concise and easy to read. The reader knows immediately that technological questions will be explored, as well as the psychological and human questions being attached to the new use of information technology. Three fields are covered, each one the subject of a chapter: 1) computers in the educational circle; 2) computers and work; and 3) computers in the house. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

压缩弯曲小半径中频弯管工艺的研究

在分析了感应加热小半径弯管形变机理的基础上，提出了压缩弯曲的成型工艺，研制出了小半径中频弯管设备，并进行了大量的工艺实验和实验研究，取得了满意的结果。     

核医学成像技术中计算机的应用

由于计算机和核医学的结合,各种成像方法的计算机化医学图像层析技术正在迅速发展,并开始广泛应用。本文介绍各类成像技术中计算机的应用,特别评述其最近进展,并提出了今后的展望。     

水工钢闸门聚酯玻璃钢复合防腐处理方法

水环境的恶化，使水工钢闸门腐蚀加重，传统的防腐工艺保护效果下降。聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少，工艺简单、防腐效果好、成本低等优点，适用于在各种水环境中作各种形式的水工钢闸门防腐，效果良好。该文结合江苏省淮海农场工程施工经验，提出了水工钢闸门聚酯玻璃钢复合防腐层结构设计、施工工艺及质量标难，为今后的推广应用提供了一定的参考依据。     

数字电视及其标准

电视技术的数字化是电视领域发展的必然趋势，它给电视技术带来了质的飞跃。在对比分析了电视模拟技术与电视数字技术的区别的基础上，对数字电视的相关技术及其标准进行了介绍，并提出了作者的看法与见解。     

便携式无线通信中的陶瓷技术

重点讨论了现代无线通信中关键元器件之一滤波器的发展进程,中、高频及微波滤波器的主要类型及性能特点。低损耗、高介电常数陶瓷在RF和IF滤波器中的应用,能够实现无线设备的微型化。对制备滤波器的介质陶瓷材料的要求是:在所使用的波段内,相对介电常数r要大,可缩小介质元件的尺寸;品质因数Q要高,可获得良好的滤波特性及通讯质量;谐振频率的温度系数f接近于零或可调节,以达到整机电子回路的要求。     

煤矿污染防治技术群及其评价

通过对枣庄矿区污染防治工作的调查研究，分析了煤矿开采对环境的影响，总结出当前煤矿污染防治的适用技术群，井对其相关问题进行评价。     

Gravity pipe flow of polymeric bulk solids in pneumatic conveying system

Various physical parameters of gravity pipes such as gravity pipe diameter, the inclination of the gravity pipe, the cone angle, temperature of the discharged material and the rate of air counter flow into the gravity pipe were studied. The results obtained from the pipe diameter and cone angle experiments showed that the mass flow rate was proportional to (D-1.4d)^2.5 and also to θ^-0.5. The results from the pipe inclination experiment showed the existence of an angle of inclination for maximum flow, which was also reported by Wieghardt [Uber einige versuche an stromungen in sand. Ingenieur Archived 20, 109-115]. The air flow experiment also showed that the mass flow rate was inversely proportional to the air counter-flow rate, and strongly influenced by the material properties. Results from the temperature experiment showed that the temperature of the material had slight effect on the mass flow rate for the temperature range that was used in the experiment. Flow visualization images showed formation of solid plugs in the pipe that played a part in influencing the behaviour and mass flow rate of solids in the system.