Stability of Standard Electrolytic Conductivity Solutions in Glass Containers

The stability of solutions having an electrolytic conductivity, κ, of 5 μS/cm to 100 000 μS/cm packaged in glass screw-cap bottles, glass serum bottles, and glass ampoules was monitored for 1 year to 2 years. The conductivity was determined by measuring the ac resistance of the solution. Mass loss was also monitored for solutions packaged in bottles. The solutions were prepared using KCl in water (κ ≥100 μS/cm) or KCl in 30 % (by mass) n-propanol 70 % (by mass) water (κ ≤ 15 μS/cm). The conductivity changes were compared by packaging type and by nominal κ. The main causes of the κ changes are evaporation (screw-cap bottles) and leaching (screw-cap bottles, serum bottles, and ampoules). Evaporation is determined from mass loss data; leaching occurs from the glass container with no change in mass. The choice of optimal packaging, which depends on the conductivity level, is the packaging in which κ changes the least with time. Ampoules are the most suitable packaging for standards having nominal κ values of 500 μS/cm to 100 000 μS/cm. Screw-cap bottles are most suitable for standards having a nominal κ of 5 μS/cm to 100 μS/cm.     

大渡河流域梯级电站统一调度的初步研究

实行流域梯级电站统一调度,是流域水电开发落实科学发展观的必然要求。经过国内外实践,实现流域统一调度的时机已渐成熟。大渡河流域水电开发有限公司结合流域水电开发实际,通过建立流域水雨情监测网,开展群库水、电、网多环节的大系统综合调度研究,流域梯级电站控制模式研究,流域供电范围及开发时序研究,流域规划环境影响评价研究,以及龚嘴、铜街子电站梯级调度实践,在流域梯级电站统一调度研究方面已取得了初步的成果。对流域梯级电站统一调度的相关政策法规以及与电网调度衔接等问题,提出了若干对策。     

Automated fluorimetry in quality control of pasteurized and ultra-high temperature-treated starch soup

Automated monitoring of the microbiological quality of heat-processed foods by the resazurin reduction test was applied to microtitration plate incubator-fluorimeter technology. The appearance and disappearance of the fluorescing peak of resorufin was monitored on microtitration trays. Pasteurized or ultra-high temperature-treated starch-based soup was used as the model food system. Bacillus subtilis spores (ultra-high temperature treatment) and vegetative cells of Enterococcus faecalis (pasteurization) were inoculated into the soup before the heat treatment at levels which resulted in some survival. The timing of appearance of maximum fluorescence correlated with the number of bacteria in pre-incubated samples. Automated resazurin-reduction fluorimetry was compared with conventional plating, turbidometry and microcolony count by the direct epifluorescent filter technique. The results of the resazurin test correlated well with those of all the other methods tested. Fluorimetry had the advantage that the results could be read within 1–5h and the reproducibility was superior to the other methods.     

基于图形库与数据库的缓冲包装CAD系统

介绍了缓冲包装CAD系统（CPCAD）的总体结构、功能模块以及关键技术。系统以图形库和数据库为基础，基于VB平台开发，实现缓冲衬垫与瓦楞纸箱的一体化设计，系统具有良好的扩充性。     

Rapid analysis of polymer homologues and additives with SFE/SFC-MS coupling

A rapid and easy analysis method for polymers is presented. The method involves sample preparation by SFE, separation of the extracted compounds by SFC and simultaneous quantitative detection by FID, as well as identification of unknowns by MS. The applications illustrate how structural research work and routine polymer analysis can be done with this time saving method.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Rare-earth-enabled universal solders for microelectromechanical systems and optical packaging

In packaging of microelectromechanical systems (MEMS), optical, and electronic devices, there is a need to directly bond a wide variety of inorganic materials, such as oxides, nitrides, and semiconductors. Such applications involve hermetic-sealing components, three-dimensional MEMS assembly components as well as active semiconductor or optical components, dielectric layers, diffusion barriers, waveguides, and heat sinks. These materials are known to be very difficult to wet and bond with low melting-point solders. New Sn-Ag- or Au-Sn-based universal solders doped with a small amount of rare-earth (RE) elements have been developed, which now allow direct and powerful bonding onto the surfaces of various MEMS, optical, or electronic device materials. The microstructure, interface properties, and mechanical behavior of the bonds as well as the potential packaging applications of these new solder materials for MEMS and optical fiber devices are described. Various packaging-related structural, thermal, or electrical issues in MEMS are also discussed.     

关于加强国土资源管理的思考

全文围绕树立和落实科学发展观这一主题 ,研究和探索如何在新时期、新阶段进一步做好国土资源管理工作的新思路、新途径和新方法。提出要进一步加强国土资源宏观管理 ,更好地为甘肃省经济社会的协调、可持续发展提供保障服务。     

科研项目管理信息系统的设计

介绍了用自顶向下的结构化方法进行科研项目管理信息系统设计的过程。该系统的应用节省了大量人力、物力和财力,提高了企业科研项目管理水平。     

包装装潢中的图形创意

图形创意在商品包装装潢设计中起着重要的作用,图形的传统和现代的构成形式使产品更具风格,独创性是其生命力所在,而联想和想象又是创造力的主要源泉,这种联想和想象力通过自然形、抽象形和寓意图形来体现.所以包装设计需要突破,通过图形创意的不断完善,促销产品,使其为市场接受,被顾客赞誉.